Adjustments

STOPPING THE ENGINE

Turn the ignition key to the left to the OFF position. Remove the key to prevent accidental starting.

IMPORTANT: If you strike a foreign object, stop the engine. Remove wire from spark plug, thoroughly inspect the unit for any damage, and repair the dam- age before restarting and operating the mower.

NOTE: ff any problems are encountered, refer to the Trouble Shooting Guide on page 16.

OPERATINGTHE LAWN TRACTOR

1. Set the desired cutting height.

. Start the engine as instructed previously.

3.Move throttle control to full throttle to prevent

strain on the engine and to operate the cutting blades.

4.Depress the clutch-brake pedal so the parking brake is released, and then release the clutch- brake pedal.

5.Place the hydrostatic control lever in either the FORWARD or REVERSE position. The farther forward you move the hydrostatic control lever, the faster you will travel.

,_ WARNING: Look to the rear before back. ing up.

To stop the lawn tractor, pull the hydrostatic control lever into NEUTRAL (N) or depress the clutch-brake pedal.

Be sure that the lawn is clear of stones, sticks, wire, or other objects which could damage lawn tractor or engine. For best results and to insure more even grass distribution, do not mow when lawn is exces- sively wet.

&WARNING: Before leaving the operator's position for any reason, disengage the blades, place the hydrostatic control lever

in neutral, engage the parking brake, shut engine off and remove the key.

When stopping the unit to empty a grass bag, etc., fol- low the instructions above. This procedure will also

eliminate "browning" the grass, which is caused by hot exhaust gases from a running engine.

GRASS COLLECTORAVAILABLE

Grass Collector Model 190-063 is available as optional equipment for the lawn tractors shown in this manual.

operated without the entire grass catcher WARNING: The mower should not be

or chute deflector in place.

NOTE: Under normal usage bag material is subject to wear, and should be checked periodically. Be sure any replacement bag complies with the mower manu-

facturer's recommendations. For replacement bags, use only factory authorized replacement bag.

&WARNING: Disconnect the spark plug wires and ground against the engine

before performing any adjustments, repairs or maintenance.

SEATADJUSTMENT

To adjust the position of the seat, loosen the four self- tapping screws on the bottom of the seat. See figure

1.Slide the seat forward or backward as desired. Retighten the self-tapping screws.

HYDROSTATICNEUTRAL CONTROL ADJUSTMENT

The hydrostatic transmission control is in correct adjustment when the tractor does not move with the engine running, the clutch engaged and the hydrostat- ic control lever in the neutral position.

If adjustment is necessary, follow these steps:

1.Raise both rear wheels off the ground by placing blocks under the rear frame.

2.Remove the transmission panel by removing the parking brake knob and truss machine screws.

3.Loosen the hex jam nut on the speed selector adjusting rod. See figure 13.

Speed Selector _

Adjusting Rod

Scissor Hex

Mounting (Loosen)

Bracket

FIGURE 13.

133Q694G401 specifications

The Yard-Man 133Q694G401 is a versatile and efficient lawn mower designed to meet the needs of homeowners seeking a reliable solution for maintaining their lawns. This model stands out in the Yard-Man lineup due to its powerful engine and user-friendly features, making it an excellent option for both novice and experienced users.

At the heart of the Yard-Man 133Q694G401 is its robust engine, typically a 4-stroke powertrain that delivers significant torque and ensures optimal cutting performance. This engine not only enhances efficiency but also promotes fuel savings, allowing users to mow their lawns without frequent refueling stops. The mower's cutting deck is designed to be durable, with a width that accommodates a variety of lawn sizes, making it suitable for both small and medium yards.

One of the key features of the Yard-Man 133Q694G401 is its adjustable cutting height. This allows users to customize the mower’s performance according to the type of grass and the desired cut. With several height settings available, it promotes a healthy lawn by enabling proper grass length management, which is essential for preventing scalping and promoting robust growth.

In terms of ease of use, the Yard-Man 133Q694G401 incorporates an ergonomic handle, designed for comfort and to reduce fatigue during longer mowing sessions. Its lightweight construction ensures that maneuverability is not compromised, allowing users to easily navigate around obstacles like trees and flower beds. Additionally, some models are equipped with features such as self-propulsion, providing extra assistance in tackling larger areas and hilly terrains with minimal effort.

The mower’s bagging system is another noteworthy characteristic, designed for efficient collection of grass clippings. This feature not only keeps the lawn tidy but also facilitates easy disposal or composting of yard waste, contributing to environmentally friendly practices. A mulching option is often available as well, allowing users to recycle clippings back into the lawn, enhancing soil fertility.

Moreover, the Yard-Man 133Q694G401 often comes with maintenance-friendly features, like easy-access air filters and straightforward oil changes, simplifying upkeep and prolonging the mower’s lifespan.

Overall, the Yard-Man 133Q694G401 stands out as a sturdy, efficient, and user-centric lawn mower that caters to the diverse needs of homeowners. With its combination of power, versatility, and convenience, it presents an excellent choice for anyone looking to maintain a pristine lawn with ease.