Yard-Man 13B-325-401 manual Tires and other harmful waste

Page 5

• Grass catcher components are subject to wear,

• Observe proper disposal laws and regulations.

damage and deterioration, which could expose

Improper disposal of fluids and materials can harm

moving parts or allow objects to be thrown. For your

the environment and the ecology.

safety protection, frequently check components

a. Prior to disposal, determine the proper method

and replace with manufacturer’s recommended

to dispose of waste from your local office of

parts when necessary.

Environmental Protection Agency. Recycling

• Mower blades are sharp and can cut. Wrap the

centers are established to properly dispose of

materials in an environmentally safe fashion.

blade(s) or wear gloves and use extra caution when

b. Use proper containers when draining fluids. Do

servicing blade(s).

not use food or beverage containers that may

• Check brake operation frequently. Adjust and

mislead someone into drinking from them.

service as required.

Properly dispose of the containers immediately

• Muffler, engine and belt guards become hot during

following the draining of fluids.

operation and can cause a burn. Allow to cool down

c. DO NOT pour oil or other fluids into the ground,

before touching.

down a drain or into a stream, pond, lake or

• Do not change the engine governor settings or

other body of water. Observe Environmental

overspeed the engine. Excessive engine speeds

Protection Agency regulations when disposing

are dangerous.

of oil, fuel, coolant, brake fluid, filters, batteries,

 

tires and other harmful waste.

Illustrated below are the location and part numbers of all labels found on your rider mower. Please follow the instruction on these labels. For replacement labels, please order by the part numbers.

777I20800

LIFT HERE

5

Image 5
Contents Operator’s Manual Table of Contents Slope Operation Important Safe Operation PracticesGeneral Operation Do Not Tires and other harmful waste Slope Guage Unpacking & Assembling Your Rider Mower Attaching Battery CablesLoose Parts Attaching Side-Discharge ChuteAttaching Hitch Plate Optional Attaching Mulch PlugAttaching Bumper Optional Know Your Rider Mower Using Shift Lever Safety InterlockGrass Fill Level Indicator Stopping MowerOperating Your Rider Mower Using The Mower Cutting Height Brake PedalGo Pedal Seat Position Adjusting the DeckBlade Brake/PTO Wheel AlignmentDeck Belt Belt ReplacementServicing Your Rider Mower Lower Variable Speed Belt Fuse ReplacementGeneral Recommendations Maintaining Your Rider MowerCutting Blade Oil Drain SleeveFuel Filter Cleaning EngineLubrication OFF-SEASON Storage Trouble Possible Cause Remedial Action TROUBLE-SHOOTINGCharge with 6 Amp. charger until fully Parts List Model 325 Series Switch Plate Model 325 Series 735-0262 2216 712-3010 Hex Nut 5/16-18 714-0115 Description 683-0147 2718 Model 325 Series Hex Screw 5/16-24 x .75 Gr.5 List of color codes below. Please add Model 325 Series Spindle Assembly 683-0150C Flow Indicator Assembly Grass Bag Assembly Description Your Notes Your Notes MANUFACTURER’S Limited Warranty for