Grasscollectoravailable, Seatadjustment | Yard-Man 131704F, 131704G

To stop the lawn tractor, pull the hydrostatic control lever into NEUTRAL (N) or depress the clutch-brake pedal.

Be sure that the lawn is clear of stones, sticks, wire, or other objects which could damage lawn tractor or engine. For best results and to insure more even grass distribution, do not mow when lawn is excessively wet.

A	WARNING:		Before	leaving	the operator's
	position	for	any	reason,	disengage	the

blades, place the hydrostatic control lever in neutral, engage the parking brake, shut engine off and remove the key.

When stopping the unit to empty a grass bag, etc., follow the instructions above. This procedure will also eliminate "browning" the grass, which is caused by hot exhaust gases from a running engine.

GRASSCOLLECTORAVAILABLE

Grass Collector Model 190063 is available as optional equipment for the lawn tractors shown in this manual.

AWARNING: The mower should not be operated without the entire grass catcher or chute deflector in place.

NOTE: Under normal usage bag material is subject to wear, and should be checked periodically. Be sure any replacement bag complies with the mower manufac- turer's recommendations. For replacement bags, use only factory authorized replacement bag.

Hydrostatic

Control Lever

~~acket

Loosen

FIGURE 13.

2.Start the engine.

3.Push the clutch-brake pedal all the way forward. Then release the pedal completely.

The lawn tractor should not move in either direction. If it does not move, depress the clutch-brake pedal all the way and set the parking brake, retighten the bolt and nut which secure the hydrostatic control lever. If it does move, shut off the engine and adjust as follows.

4.Loosen the hex bolt which secures the pintle arm extension to the pintle arm, using a rachet wrench with '/2" socket extension. See figure 14.

-~~ r~wl~rr~'

WARNING: Disconnect the spark plug wire and ground against the engine before per- forming any adjustments, repairs or

maintenance.

SEATADJUSTMENT

To adjust the position of the seat, loosen the four self- tapping screws on the bottom of the seat. See figure

1.Slide the seat forward or backward as desired. Retighten the self-tapping screws.

HYDROSTATICCONTROLADJUSTMENT

The hydrostatic transmission control is in correct ad- justment when the lawn tractor does not move with the engine running, the clutch engaged and the hydrostatic control lever in the neutral (N) position.

If adjustment is necessary, follow these steps.

NOTE: A rachet wrench with a 112"socket extension is required to make this adjustment.

1.Remove the transmission panel by removing the parking brake knob and truss machine screws. Loosen the bolt and nut on the bracket on the hydrostatic control lever. See figure 13.

~,I/,I'OiI..10

	Pintle	~
	Arm	~
	Arm
		~'"
		I

Extension	C	~, J\)'J=
Extension	\Y~	~, J\)'J=
Pintle Arm	~~'-1:.n

FIGURE 14.-Top View of Transmission

5.Raise both rear wheels off the ground by placing blocks under the rear frame.

6.Start the engine. Make certain the clutch-brake pedal is depressed and the parking brake is set.

7.Move the hydrostatic control lever to move the pin- tie arm until you find neutral (rear wheels do not rotate in either direction).

WARNING: Be careful of the cooling fan on the hydrostatic transmission.

131734G, 131704F, 131704G specifications

The Yard-Man 131704F, 131704G, and 131734G are standout models in the extensive lineup of lawn and garden equipment offered by Yard-Man, a brand known for its commitment to quality and innovation in outdoor power tools. These models cater primarily to homeowners and professional landscapers, providing robust solutions for maintaining lawns and gardens effectively.

One of the main features of the Yard-Man 131704F is its reliable engine performance. Powered by a potent motor, this model is designed to tackle both small and large areas with ease, ensuring a uniform cut and enhancing the appearance of your lawn. The 131704G variant similarly boasts a powerful engine, but the notable feature here is its focus on fuel efficiency. This model integrates advanced technology to optimize fuel consumption without compromising cutting power, making it an environmentally friendly choice.

The Yard-Man 131734G distinguishes itself with its cutting-edge features, including a multi-height adjustment system. Users can easily modify the cutting height to suit various grass types and seasonal conditions. This flexibility allows for tailored lawn care, ensuring that the grass remains healthy and vibrant throughout the year. Moreover, this model often includes a large grass catcher, which minimizes the need for raking and promotes a cleaner mowing experience.

In terms of durability, all three models come equipped with robust construction materials that ensure longevity and resistance to the elements. The decks are typically made from durable steel, which provides stability and strength, while the ergonomic designs make them user-friendly, reducing fatigue even during extended use.

Safety features are also paramount in these Yard-Man models. Each is equipped with safety guards and easy-start mechanisms that enhance the user experience, allowing homeowners and professionals alike to operate the equipment with confidence.

In summary, the Yard-Man 131704F, 131704G, and 131734G present an excellent combination of performance, efficiency, and user-friendly design. Their exceptional engine capabilities, cutting height adjustments, and durable construction make them ideal for anyone looking to maintain a pristine lawn or garden. Whether for personal use or professional landscaping, these models represent a solid investment in outdoor maintenance equipment.