Cutting Height Adjustment, Handle Height Adjustment

SECTION 7: MAKING ADJUSTMENTS

WARNING: Be sure to disconnect the spark plug wire and DE-ENERGIZE starter before performing any adjustments or repairs. DO NOT attempt any maintenance or service to the engine and/or mower equipped with the safety key in the unlocked and/or energized mode.

WARNING: NEVER assume starter is de- energized, even if the key is in the locked position and/or removed from the engine. ALWAYS de-energize self starter prior to performing any maintenance or service to the engine and/or mower. Follow instructions on the engine and/or machine to de-energize starter.

Cutting Height Adjustment

There is an adjusting plate and thumb lever at each wheel position to adjust the cutting height. Each adjusting plate has nine height positions. Height of cut will change if you move the thumb lever from one hole to another.

Simply depress the lever towards wheel and move the wheel and lever assembly to the desired position. All wheels must be placed in the same relative position for uniform cutting height. See Figure 8.

Adjustment

Lever

Figure 8

For rough or uneven lawns, move the height adjustment handles to positions which will give a higher cutting height. Both front and rear handles must be placed in the same relative position.

Handle Height Adjustment

Notch

Lower Handle

Figure 9

Your mower is shipped with the handle in the higher height position. To lower the handle height, proceed as follows.

•Remove the starter rope from the rope guide.

•Remove the upper handle by removing the hand knobs and carriage bolts. Lay the upper handle out of the way, being careful not to bend or kink the cable.

•Remove the hairpin clips from the weld pins on the handle brackets. Press inward on the legs of the lower handle. Remove lower handle from the mower.

•Turn the lower handle around so the notch on the bottom of the lower handle is facing forward as shown in Figure 9. Reassemble, placing the bottom holes in the handle over the weld pins in the handle mounting bracket.

•Reassemble the upper handle.

•Place the hairpin clips in the inner holes in the weld pins and attach the starter rope as instructed in the Set-Up Instructions.

109T specifications

The Yard-Man 109T is a highly regarded lawn tractor known for its exceptional performance and user-friendly features. Designed for residential and light commercial mowing tasks, this tractor is a perfect balance of power, efficiency, and ease of use, making it a go-to choice for homeowners and landscapers alike.

At the heart of the Yard-Man 109T is its robust engine. It typically comes equipped with a reliable 420cc four-stroke engine, which provides ample power to handle various mowing conditions. This engine is known for its durability and efficiency, ensuring that the tractor can tackle tough grass and uneven terrain with ease.

One of the standout features of the Yard-Man 109T is its cutting deck. With a width of approximately 42 inches, this cutting deck is designed to deliver a clean and even cut. It usually offers multiple height adjustments, allowing users to customize the cutting height to suit their lawn care needs. This ensures that whether you are mowing tall grass or maintaining a well-manicured lawn, you can achieve the desired look with precision.

Another technological highlight of the Yard-Man 109T is its hydrostatic transmission. This feature provides smooth and effortless operation, making it easy for users to control their speed without the need for manual gear shifting. The hydrostatic system also enhances maneuverability, allowing the tractor to navigate tight spaces and make sharp turns, which is particularly useful for navigating around flower beds or garden features.

User comfort is also prioritized in the design of the Yard-Man 109T. The tractor typically features a comfortable seat with ample padding, ensuring a pleasant experience during extended mowing sessions. Additionally, the steering wheel is designed for easy handling, making it accessible for users of all ages and skill levels.

For added convenience, many models of the Yard-Man 109T come equipped with features such as an easy-to-use control panel, which allows for quick adjustments and monitoring of key parameters like speed and fuel level. Some variants may also include a rear bagger attachment for efficient grass collection, further enhancing its capabilities.

In summary, the Yard-Man 109T is a versatile lawn tractor that combines power, efficiency, and comfort. With its reliable engine, durable cutting deck, hydrostatic transmission, and user-friendly features, it stands out as an excellent choice for anyone looking to maintain their lawn with ease and efficiency. Whether you’re a seasoned gardener or a new homeowner, the Yard-Man 109T is designed to meet your lawn care needs.