OPERATING INSTRUCTIONS (FIGURE 2)
1.Remove fix screw located on the table post to release the inner tube and outer tube of the post.
CAUTION– Stabilize the top board as you remove the fix screw so that top board will not bounce back too quickly.
2.To raise the top board, place your hand underneath the top board and move it upward to the desired height. Remove pressure to set height.
3.To lower the top board, lift the adjustable plate and push top board downward to the desired height. To set the height, release the adjustable plate.
4.To rotate the top board, twist the knob of the tilt control bar to loosen. Rotate the top to the desired position. Tighten the knob to set the position.
Rotating Knob
Adjustable Plate
Table Post
Figure 2
Manufactured for: | www.sunrisemedical.com |
Sunrise Medical, Inc. | Phone: (303) |
7477 East Dry Creek Parkway | Toll Free Phone: (800) |
Longmont, Colorado 80503 | In Canada: (800) |
Printed in Taiwan
©2002 Sunrise Medical 7.02