Stiga 8211-0001-70 manual Patent Design Registra Tion, Spark plug, Air intake, Lubrication, Fuse

Page 14

ENGLISH

4.Clean the paper filter by tapping it gently against a flat surface. If the filter is very dirty, replace it.

5.Clean the pre-filter. If the filter is very dirty, re- place it.

6.Assemble in the reverse order.

Compressed air or petroleum-based solvents such as kerosene may not be used for cleaning the paper filter insert. This will damage the filter.

5.10 Spark plug

The spark plug(s) must be replaced every 200 hours of operation (=at every other basic service). Before disconnecting the spark plug, clean around its mounting.

Spark plug: Champion RC12YC or equivalent.

Electrode distance: 0.75 mm.

5.11 Air intake

See 19:T. The engine is air-cooled. A blocked cooling system can damage the engine. Clean the engine’s air intake after 50 hours of operation. More meticulous cleaning of the cooling system is carried out during each basic service.

5.12 Lubrication

All lubrication points in accordance with the table below must be lubricated every 50 hours of opera- tion as well as after every wash.

Object

Action

Fig-

 

 

ure

Wheel bear-

2 grease nipples.

17

ing

Use a grease gun filled with

 

 

universal grease. Pump until

 

 

the grease emerges.

 

Centre point

4 grease nipples.

18

 

Use a grease gun filled with

 

 

universal grease. Pump until

 

 

the grease emerges.

 

Steering

Brush the chains clean with a

-

chains

wire brush.

 

 

Lubricate with universal

 

 

chain spray.

 

Tensioning

Lubricate the bearing points

19

arms

with an oil can when each

 

 

control is activated.

 

 

Ideally carried out by two

 

 

people.

 

Control

Lubricate the cable ends with

20

cables

an oil can when each control

 

 

is activated.

 

 

Must be carried out by two

 

 

people.

 

5.13 Fuse

In the event of electrical faults, check/replace the fuse, 20 A. See 9:S.

6 PATENT - DESIGN REGISTRA-

TION

This machine or parts thereof is covered by the fol- lowing patent and design registration: SE9901091-0, SE9901730-3, SE9401745-6, US595 7497, FR772384, DE69520215.4, GB772384, SE0301072-5, SE04/000239 (PCT), SE0401554-1, SE0501599-5.

GGP reserves the right to make alterations to the product without prior notification.

55

Image 14
Contents Stiga Park 5HST Max Page Page General DescriptionSafety system ControlsGear lever 2H Man Power take-off 2GIgnition lock 1E 10Clutch release lever HST, 4WDAreas of USE Starting and OperationStart General safety checkElectrical safety check Operating tipsMaintenance Belt transmissions Checking adjusting DrainingTransmission, oil 4WD FillingBattery Air filter, engineAir intake Patent Design Registra TionSpark plug LubricationW. s t i g a . c o m