Storage, Sparking Plug, Changing Blades

ENGLISH	GB

Honda: Take off the cover then remove the filter (Fig. 16). Check the filter carefully for holes or other damage. A broken or damaged filter must be replaced.

To remove dirt, tap the filter several times against a hard surface, or blow compressed air through the filter from the back. Try not to clean the filter by brushing, as this will force the dirt into the fibres. A very dirty filter should be replaced.

Clean the air filter after every 25 hours of use, or once every season; more often if the motor is used on dusty terrain.

Tecumseh: Check the air filter after every 25 hours of use, more often if the engine is used in dusty conditions. If the foam filter is dirty or blocked it should be replaced.

Dismantle the cover A. Clean inside the cover A and the filter support E, (fig. 13). Soak the foam filter C with two teaspoons (approx. 20 ml) of en- gine oil. Massage the filter with a clean cloth to re- move any excess oil. Also check the seal D, replace it if damaged or deformed.

Refit the cover A.

SPARKING PLUG

Never remove the spark plug or the igni- tion lead when checking to see if there is any spark, always use an approved test instrument.

Clean the sparking plug regularly (every 100 hours running). Use a wire brush for cleaning and adjust the correct spark gap (fig. 17).

Change the sparking plug if the electrodes are ex- cessively burnt or if the plug is damaged. The rec- ommendations of the engine manufacturers are as follows:

Briggs & Stratton: Champion J19LM (RJ19LM), Spark gap 0,76 mm.

Honda: BPR6ES (NGK),

Spark gap 0,7-0,8 mm.

Tecumseh: Champion RJ17LM, RJ19LM, Spark gap 0,6 mm.

CHANGING BLADES

Use protective gloves to prevent cuts when changing blades/knifeblades.

Blunt and damaged blades tear off the grass and spoil the look of the lawn after mowing. New, well sharpened blades cut the grass cleanly, so that the lawn looks green and fresh even after mowing.

Always check the blade(s) after an impact. First disconnect the ignition cable. If the blade system has been damaged the defective parts must be changed. Always use genuine spare parts.

To replace the blade, slacken the screw. Fit the new blade so that the stamped STIGA logotype is turned facing the blade attachment (and not facing the grass). Refit the washer and screw. Tighten the screw fully to a torque of 40 Nm (fig. 18).

When replacing the blade, the blade screw should also be replaced.

The guarantee does not cover damage to the blade, blade holder or engine caused by running into ob- stacles.

When replacing the blade, the blade holder and blade screw, always use original spare parts. Non- authentic spare parts could lead to the risk of per- sonal injury or damage, even if they fit the machine.

SHARPENING OF THE BLADES

Sharpening of the blades must be done by wet method grinding, using a whetstone or a grind- stone.

For the sake of safety, the blades should not be sharpened on an emery wheel. A very high temper- ature could cause the blade to become brittle.

Once the blade has been sharpened, it must then be balanced so as to avoid vi- bration damage.

STORAGE

WINTER STORAGE

Empty the fuel tank. Start the engine and let it run until it stops. The same petrol must not remain in the tank for more than one month.

Tip up the mower and screw out the sparking plug. Pour a teaspoon of engine oil in the sparking plug hole. Pull out the starting handle slowly so that the oil is distributed in the cylinder. Screw in the sparking plug.

Thoroughly clean the mower and store it indoors in a dry place.

8211-0223-06 specifications

The Stiga 8211-0223-06 is an advanced lawn mower designed for efficiency and versatility, perfect for maintaining a pristine lawn with minimal effort. This model is well-regarded for its powerful performance and user-friendly features, making it an ideal choice for both residential and commercial applications.

One of the standout features of the Stiga 8211-0223-06 is its robust engine, which ensures reliable power and longevity. Equipped with a reliable combustion engine, this mower can handle various grass types and foliage densities without compromising performance. This power is complemented by an easy-start mechanism, which makes getting going a breeze.

In terms of cutting technology, the mower includes a high-quality blade that is specifically engineered to provide a clean and precise cut. The adjustable cutting height allows users to tailor the mowing experience, accommodating different grass lengths and personal preferences. With multiple cutting heights to choose from, users can effortlessly switch between settings based on their lawn’s needs.

The Stiga 8211-0223-06 also features a spacious grass collection bag that minimizes the need for frequent emptying during use. This feature is particularly beneficial for users with larger lawns who prefer uninterrupted mowing sessions. The innovative design of the collection system ensures efficient grass pickup, promoting a tidy finish.

Additionally, the mower is built with ease of use in mind. The lightweight design allows for effortless maneuverability, while the ergonomic handle ensures comfort during extended mowing sessions. The collapsible handle also facilitates easy storage, making it convenient for users with limited space.

Durability is another aspect that shines through in the Stiga 8211-0223-06. The construction materials are of high quality, ensuring that the mower withstands the rigors of regular use while maintaining peak performance over time. This makes the mower a smart long-term investment for homeowners and professionals alike.

In conclusion, the Stiga 8211-0223-06 is a feature-rich lawn mower combining power, precision, and user-friendly design. With its reliable engine, adjustable cutting heights, efficient grass collection system, and durable construction, it stands as an excellent option for anyone looking to achieve a well-manicured lawn with minimal hassle. Investing in this mower ensures a beautiful and healthy lawn season after season.