McIntosh MA2275 owner manual Rear Panel Connections, Jumper Plugs TAPE, DVD, Tuner

Rear Panel Connections

External SENSOR or Keypad Jack permits the con- nection of a McIn- tosh IR Sensor or Keypad for remote operation

JUMPER PLUGS	TAPE, DVD, TUNER,
connect the Pream-	CD and CD2 INPUTS
plifier OUTPUTS	accept unbalanced high
PREAMP 1 Jacks to	level program source
the POWER AMP IN	signals
Jacks and are needed
for normal operation

Main Fuse holder, refer to information on the back panel of your MA2275 to determine the cor- rect fuse size and rating

POWER AMP IN	TAPE OUTPUTS	PHONO Input accepts
inputs accept sig-	provide the Record	signals from a Moving
nals from a sepa-	Out Signal	Magnet Phono Cartridge
rate external
preamplifier

Connect the MA2275 power cord to a live AC outlet. Refer to information on the back panel to determine the correct voltage

POWER CONTROL

MAIN Output sends

aturn-on signal to an external McIntosh Power Amplifier when the MA2275 is turned on

POWER CONTROL	DATA PORTS send	CD balanced INPUTS
ACC Output sends a	signals to McIntosh	accept high level pro-
turn-on signal to a	Compatible Compo-	gram source signals
McIntosh Source	nents to allow control
Component or Power	with the Remote
Control unit when the	Control

MA2275 is turned on
PREAMP OUTPUTS	Ground
1 and 2 supply the	connection
Preamplifier Output	for turntables
to either the internal
or external power am-
plifier

10