How to Operate by Remote Control

The supplied Remote Control is capable of directly control- ling the functions of contemporary McIntosh Source Com- ponents connected to the MA2275. Earlier McIntosh source components and other brand source components can be controlled by the MA2275 Remote Control with the ad- dition of a McIntosh Remote Control Translator (RCT).

Note: Your McIntosh Dealer can assist you with the installation and operation of the Remote Control Translator (RCT).

Mute

Press the MUTE Push-button to mute audio at the Loud- speaker and Headphone Outputs. Press MUTE a second time to unmute audio.

Mode

Press the MODE Push-button to select between Stereo and Mono Modes of operation.

Input Source Selection

Press one of the Input Push-buttons to select the desired program source.

Disc Player, Music Server or Tape Recorder Functions

Use these push-buttons to operate a Disc Player or Tape Recorder.

Numbered Push-buttons

Press Push-buttons 0 through 9 to access tuner station pre- sets or Disc chapters/tracks/discs.

Disc and Track

Use the DISC and TRACK Push-buttons when a Disc Player, Music Server or Tape Recorder is being used.

Note: Certain Disc Players will require a Numbered Push- button be pressed immediately after the Disc or Track Push-button is depressed.

Volume

Press the UpS or DownT VOLUME Push-button to raise or lower the listening volume level.

Note: The TAPE OUPUTS are not affected by volume changes.

Tuner Push-buttons

Press the AM or FM push-button to select the desired broadcast band. Press and release the CHANnel UpS or DownTpush-button to move from station to station. Press and hold a CHANnel UpS or DownT push-button to

move continuously from station to station. Press the +10 Push-button to start the automatic brief audition of each of the presets stored in the tuner memory. Press the +10 Push-button a second time to stop on a station preset and exit the review process.

Acc On/Acc Off

Press ACC ON Push-buton to switch the power ON to certain McIntosh Disc Players. Press ACC OFF Push-but- ton to switch the power OFF to certain McIntosh Disc Players. The ACC ON/OFF Push-buttons also control the signal at the ACCessory(B) Power Control Jack; it will also remember the last command when the MA2275 is switched Off and On again.

Pause

Press to perform various functions on a variety of McIn- tosh Components. It will also pause the playing of a Disc or Tape playback.