Stanley Black & Decker CS05/CS06 user manual Troubleshooting, Problem Cause Remedy

Page 19

TROUBLESHOOTING

If symptoms of poor performance develop, the following chart can be used as a guide to correct the problem. When diagnosing faults in operation of the saw, always make sure the hydraulic power source is supplying the correct hydraulic flow and pressure to the saw as listed in the table. Use a flowmeter known to be accurate. Check the flow with the hydraulic fluid temperature at least 80 °F/27 °C.

PROBLEM

CAUSE

REMEDY

Cuts slow.

Insufficient fluid flow or low relief

Adjust fluid flow to proper gpm. For

 

valve setting.

optimum performance adjust relief

 

 

valve to 2250 psi/155 psi.

 

Chain dull.

Sharpen per instructions or replace.

 

Backpressure too high.

Should not exceed 250 psi/17 bar at

 

 

8 gpm/30 lpm measured at the end

 

 

of the tool operating hoses.

Bar turns color.

Insufficient oiler flow.

Adjust oiler per Service Manual.

Tool does not run.

Power unit not functioning.

Check power unit for proper flow

 

 

and pressure (4 gpm/15 lpm at 1500

 

 

psi/104 bar minimum for the CS05

 

 

and 7 gpm/26 lpm at 1000 psi/70 bar

 

 

for the CS06).

 

Coupler or hoses blocked.

Remove obstruction.

 

Mechanical failure.

Disassemble tool and inspect for

 

 

damage.

Tool runs backwards.

Pressure and return reversed.

Connect for proper flow direction.

 

 

Motor shaft rotates clockwise.

On/Off trigger is hard to press.

Pressure and return reversed.

Correct for proper flow direction.

 

Backpressure too high.

Should not exceed 250 psi/17 bar at

 

 

8 gpm/30 lpm measured at the end

 

 

of the tool operating hoses.

Oil leakage around drive sprocket.

Motor shaft seal failure.

Replace as required. Make sure that

 

 

oil present is not the result of excess

 

 

oiler flow.

Oil leakage between rear gear hous-

Motor face seal failure.

Replace as required.

ing and valve handle assembly.

 

 

Chain continues to move after valve

Chain is too loose.

Tighten chain.

is shut off.

Input flow too high.

Decrease flow.

CS05/CS06 User Manual ◄ 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents CS05 CS06 Page Table of Contents Local Safety Regulations Safety SymbolsSafety Precautions Safety Precautions Working in Proximity to Electrical Hazards Electrical PrecautionsStorm Work and Emergency CONDITIONS-LINE Clearance Tool Stickers & Tags 107Hose Types Hose Safety TagsTool to Hydraulic Circuit Hose Recommendations Hose RecommendationsHtma / Ehtma Requirements Htma RequirementsOperating Procedures Preoperation ProceduresOperation Bucking Felling Cutting Down a Tree FigureNotching or Undercutting Felling or Back CUTCrosscutting Logs with Pressure on Top Logs with Pressure on TOP FigureCrosscutting Logs/Limbs with Pressure on Bottom LOGS/LIMBS with Pressure on Bottom FigurePruning and Debranching Cold Weather OperationTool Protection & Care Problem Cause Remedy TroubleshootingAccessories SpecificationsCS05/CS06 Parts Illustration Part QTY Description CS05/CS06 Parts ListParts List

CS05/CS06 specifications

Stanley Black & Decker has long been synonymous with quality and innovation in the industrial tools sector, and their CS05 and CS06 models exemplify this commitment. These two models represent some of the latest advancements in battery-powered electric tools designed for both professionals and DIY enthusiasts.

The Stanley Black & Decker CS05/CS06 models are engineered with a powerful motor that delivers impressive torque and speed, allowing users to tackle a variety of tasks with ease. The CS05 model typically features a 20V Max lithium battery system that provides longer run time and improved battery life, ensuring that users can complete their projects without interruption. This battery technology is particularly advantageous for high-demand applications, making it ideal for construction, woodworking, and metalworking.

One of the standout features of the CS05/CS06 is their ergonomic design. Both models boast a lightweight structure and well-balanced form, allowing for extended use without causing fatigue. The soft-grip handle enhances user comfort and control, making precision tasks much simpler. Additionally, the compact design of the tools aids in maneuverability in tight spaces, making them perfect for both professional and home environments.

In terms of technology, the CS05/CS06 incorporates advanced electronic controls that offer variable speed settings. This allows users to adjust the speed according to the specific requirements of the job, providing versatility that is essential for tackling various materials and applications. The built-in LED work light is another handy feature, illuminating dark areas or work surfaces to improve visibility and accuracy during use.

Durability is a prominent characteristic of the Stanley Black & Decker CS05 and CS06 models. Constructed with high-quality materials, both tools are designed to withstand the rigors of demanding job sites. The protective housing and robust components ensure longevity and reliable performance, even under extreme conditions.

Lastly, both models come equipped with features that enhance safety, including safety switches and guards that prevent accidental starts. The overall combination of strength, versatility, comfort, and safety makes the Stanley Black & Decker CS05/CS06 a top choice for anyone looking to invest in a reliable, high-performance electric tool. In today's ever-evolving market, these models stand out as examples of where quality meets innovation.
Top Page Image Contents