Stanley Black & Decker DS06 manual Troubleshooting, Symptom Cause Remedy

Page 20

TROUBLESHOOTING

If symptoms of poor performance develop, the following chart can be used as a guide to correct the problem.

When diagnosing faults in operation of the tool, always check that the hydraulic power source is supplying the

correct hydraulic fl ow and pressure to the tool as listed in the table. Use a fl owmeter known to be accurate. Check the fl ow with the hydraulic oil temperature at least 80°F/27°C.

SYMPTOM

CAUSE

REMEDY

Tool does not run.

Hydraulic power source not function-

Check power source for proper fl ow

 

ing correctly.

and pressure (7-9 gpm26-34 lpm at

 

 

2000 psi/140 bar.

 

Coupler or hoses blocked.

Remove obstruction.

 

Mechanical failure.

Have tool serviced by authorized

 

 

dealer.

Tool runs backwards.

Pressure and return lines incorrectly

Correct hose connections. Motor shaft

 

connected.

rotates counterclockwise as viewed

 

 

from the end of the motor shaft.

Diamond saw cuts slow.

Insuffi cient fl uid fl ow or too high back

Check hydraulic supply. If hydraulic

 

pressure or relief valve set too low.

supply is correct, have unit serviced

 

 

by authorized dealer.

 

Back pressure too high.

Should not exceed 250 psi/17 bar at

 

 

9 gpm/34 lpm measured at the end of

 

 

the tools operating hoses.

 

Loss of diamond segment side clear-

Replace chain.

 

ance.

 

 

Chain segment dulled because of con-

Redress segmented by cutting in

 

tinuous use in hard material or rebar.

abrasive material (i.e. concrete, build-

 

 

ing block, etc.).

 

 

Note: This indicates that the wrong

 

 

chain is being used.

 

Wrong chain for application.

Scale down to a lower numbered

 

 

chain.

 

Wired edged bar rails.

Dress rails square.

 

Hydraulic fl uid mixed in water supply.

Have tool serviced.

Excessive vibration and cuts rough.

Segment(s) broken or missing.

Repair broken segment or replace

 

 

chain.

 

Chain installed backwards.

Correct chain direction.

 

Loose chain tension.

Retension the chain.

 

Excessive feed force.

Reduce feed force.

Wil not cut straight.

Accumulated saw bar wear and un-

Turn the saw bar over and dress rails

 

even chain segment profi le wear.

square. Replace the saw bar and

 

 

chain.

Loss of power.

Drive sprocket slipping on Tran-

Adjust and tighten Trantorque®

 

torque® adapter.

adapter to 17 ft lb/23 Nm.

Trigger hard to press.

Pressure & return hose reversed.

Connect for proper fl ow direction. Mo-

 

 

tor shaft must rotate clockwise.

 

Back-pressure too high.

Should not exceed 250 psi/17 bar @

 

 

9gpm/34 lpm measured at the end of

 

 

the tool’s operating hoses.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents DS06 Page Table of Contents Hydraulic Tools Safety Symbols Local Safety RegulationsSafety Precautions Safety Precautions Tool Stickers & Tags LwaHose Safety Tags Hydraulic Hose RequirementsHose Types Hose Pressure RatingHtma Requirements Maximum Back PressurePreopertion Procedures OperationPlan the CUT Operating ProceduresCheck Chain Segment Wear Cold Weather Operation Using the Wall WalkerTypes of Cuts Maintenance & Adjustments General Maintenance Tips Chain Tension AdjustmentSAW BAR Rail Rotating the SAW BARServicing the Chain Exposed Drive Link TangReplacing the Chain Breaker Punch Spinning RivetsNose Sprocket Disassembly Assembly Spinner Oiling ChambersFiling Rivets Tool Equipment & Care Troubleshooting Symptom Cause RemedyTroubleshooting Specifications AccessoriesService Instructions ReassemblyTrigger 28 and Safety Catch 30 Removal & Installation Valve Spool 14 Removal InstallationMotor Inspection Cleaning Motor Reassembly ShaftsBAR & Chain and Chain Guard Assembly DS06 Parts Illustration DS06 Parts List DescriptionFor Serial Numbers Below DS06 Parts List For Serial Numbers 356 and Below Diamond Chain Applications Model Bar Length Correct ApplicationsWarranty Exceptions from Warranty
Related manuals
Manual 26 pages 15.05 Kb

DS06 specifications

Stanley Black & Decker DS06 is a powerful and versatile tool that combines cutting-edge technology with user-friendly features, making it a must-have for both professionals and DIY enthusiasts. Designed for optimal performance, the DS06 caters to a wide range of applications, from heavy-duty construction tasks to light home improvement projects.

One of the standout features of the DS06 is its robust motor. With a high power output, this tool delivers consistent performance, ensuring that users can tackle even the toughest materials with ease. The motor's efficiency not only enhances the tool's performance but also contributes to its longevity, allowing it to withstand rigorous use in demanding environments.

In addition to its powerful motor, the DS06 incorporates advanced battery technology. Equipped with a lithium-ion battery, this tool promises an extended runtime and reduced charging times compared to traditional batteries. Users can experience greater convenience, as the quick-charge capability means less downtime and more productivity. The battery's lightweight design also enhances the tool's overall ergonomics, making it more comfortable to handle during extended use.

Another significant characteristic of the DS06 is its intelligent design. Featuring an ergonomic grip, the tool is designed to reduce user fatigue, making it suitable for prolonged tasks. The lightweight construction of the DS06 ensures that users can maneuver the tool easily without compromising control.

Stanley Black & Decker has also prioritized safety with the DS06. It includes several safety features, such as a blade guard and a safety lock-off switch, which help prevent accidents during operation. These features provide peace of mind, allowing users to focus on their work without worrying about potential hazards.

Versatility is a key attribute of the DS06, with its ability to accommodate various attachments and accessories. This adaptability makes it a valuable addition to any tool collection, as it can be used for a wide array of tasks, including cutting, sanding, and drilling.

In summary, the Stanley Black & Decker DS06 is a tool that exemplifies innovation and practicality. Its powerful motor, advanced battery technology, ergonomic design, and safety features make it an ideal choice for a diverse range of applications. Whether you're a professional contractor or a weekend warrior, the DS06 is equipped to meet your needs and elevate your work efficiency.
Top Page Image Contents