Solo USA 444, 450 Index, Guarantee, Important Components / Type plate Technical Specifications

Index

			Page
1.	Important Components / Type plate		4
2.	Technical Specifications		6
3.	Safety regulations		7
	3.1	Correct use / Notes for General Use	7
	3.2	General safety instructions	7
	3.3	Personal protective equipment for your safety	7
	3.4	Protection of Environment	7
	3.5	Operating Hints	7
4.	Maintenance and Care		8
	4.1	General Maintenance Hints	8
	4.2	Fuel-Information	8
	4.3	Spark Plug	9
	4.4	Preparation for Storage	9
	4.5	Carburettor adjustment	9
	4.6	Air Filter Maintenance	10
5.	Assembly		11
	5.1	Assembly of misting equipment	11
	5.2	Assembly of handle, spray tube and spray nozzle	11
6.	Starting / Stopping the engine		12
7.	Operating Hints		13
	7.1	Adjustment of shoulder straps	13
	7.2	Filling	13
	7.3	Misting	13
	7.4	Residual spray medium	14
	7.5	Strainer for accessory sets	14
	7.6	Checking the spray medium flow rate	14
	7.7	Draining and cleaning the tank	15
	7.8	Application	15
8.	Maintenance Plan		16
9.	Motorised sprayer - accessories		17
10. For USA only: ECW Statement / Manufacturers Warranty Coverage			17

Guarantee

The manufacturer guarantees trouble-free quality and will cover the cost of replacing parts which are found to be faulty in material or workmanship within the prescribed guarantee period after the date of purchase. Please note that specific guarantee conditions may vary from country to country. If in doubt, ask your equipment vendor. He is responsible for guarantee matters.

We hope you will understand that we cannot be liable for damage resulting from the following causes:

•Non-compliance with the operating instructions.

•Neglecting essential maintenance and repair work.

•Damage caused by incorrect carburettor adjustment.

•Wear in normal use.

•Obvious overload by continuously exceeding the maximum performance limit of the product.

•Using non-authorised tools.

•Use of force, incorrect treatment, misuse and accidents.

•Damage from excessive heat due to dirt build-up around the cooling fan housing.

•Attempted adjustments and repairs by unqualified persons.

•Use of unsuitable spare parts or third party parts, if these are the cause of the defect.

•Use of unsuitable or stale fuel.

•Damage caused by using the product in the hire or rental industry.

Normal cleaning, adjustments or maintenance work fall outside the guarantee provisions.

A service centre authorised by the manufacturer must carry out all guarantee work.

ENGLISH 3