Solo USA 444, 450 manual Safety regulations

Page 7

Safty regulations

3.Safety regulations

3.1Correct use / Notes for General Use

The mistblower is suitable for the application of crop protection products which have been approved by the responsible, local Registration Authority. The output quantity can depend on the position of the spray tube.

If the spray tube is held upwards at an angle exceeding 30 deg. from the horizontal position, the installation of a liquid booster pump may be necessary. The booster pump is available as an accessory.

With the use of a granulate attachment (available as special attachment- without liquid pump), the mistblower can be used to spread granular fertilizer, fish food granules or for the spreading of grass seed.

The mistblower, without using the formula tank, also doubles as air blower to remove fallen leaves, grass clippings, paper, dust or snow in parks, gardens, sports arenas, parking lots or drives (without liquid pump).

The mistblower may only be used for the jobs it has been designed for – and no other!

Always observe all safety hints while using the machine.

3.2 General safety instructions

Some parts on the machine have been removed for transport purposes. Prior to first use, the mistblower has to be completely assembled. (Fig.4a – 4d) This mistblower may only be started and used when completely

assembled.

Read the operating instructions carefully before placing in service and keep them in a safe place. First time users should be instructed by the seller or an expert.

The operator is liable towards others within the operating area of the mistblower.

Only operate the mistblower when in good physical condition. Fatigue and illness lead to carelessness and accidents. Proceed in a careful and alert manner.

Never use a machine while under the influence of alcohol or drugs.

The air exit speed from the nozzle is very high. Never point the nozzle towards persons or animals.

3.3 Personal protective equipment for your safety

To prevent injuries to head, eyes, hand, feet or damage to hearing, the following protective equipment should be worn:

Clothing should be appropriate for the job, i.e. not too loose and not too tight to be hindering. Do not wear work coat, shorts or sandals. The operator should not wear a scarf, a necktie or jewelry which may get caught by branches.

Protect your face and eyes with a face guard or safety glasses.

A breathing mask should be worn when using poisonous chemicals

To avoid damage to hearing, the operator should wear suitable personal noise protection such as ear muffs, ear plugs or similar.

Wear firm work shoes with non-slip soles.

Always observe accident prevention regulations issued by local trade organizations or workers compensation boards.

3.4 Protection of Environment

Be aware of your surroundings

Watch out for animals which may be within your work area

Be aware that noise is harmful to the environment. Inquire about and respect possible local rest periods.

3.5 Operating Hints

Approach the target object with the engine at idling speed. Accelerate to full engine speed, then open formula on-off tap.

No other persons should be present within a circle of 15 meters from the operator. Watch out for children and animals. Objects carried by the air stream can deflect and injure nearby persons.

Never operate on unstable ground watch out for any obstacles such as tree stumps, tree roots, ditches etc..

Take special care while working along slopes.

Never touch a hot exhaust.

ENGLISH 7

Image 7
Contents 444 Preface SymbolsParts subject to wear and tear Index GuaranteeImportant Components / Type plate Technical Specifications AssemblyType Important Components / Type plateType Mistblower 444 450 Technical SpecificationsSafety regulations General Maintenance Hints Maintenance and CareFuel-Information Preparation for Storage Carburettor adjustmentFollowing instructions are for authorised service shops Spark PlugAir Filter Maintenance Assembly of misting equipment AssemblyAssembly of handle, spray tube and spray nozzle Shutting off engine Starting / Stopping the engineStarting with cold engine Starting with warm engine after short stopMisting Output Guide Type Adjustment of shoulder strapsOperating Hints FillingResidual spray medium Strainer for accessory setsChecking the spray medium flow rate Application Draining and cleaning the tankMaintenance Plan Motorised sprayer accessories Made in Germany