Handling and operation
| GB |
| Electrical connections | |
| IE |
|
|
|
|
|
|
| |
| CY |
|
| DANGER |
|
|
|
|
|
Risk of fatal electrocution!
Contact with wires or components carrying mains power could be potentially fatal!
Observe the following safety notices to avoid risks from electrical hazards:
►Do not operate the appliance if the power cable or the plug are damaged.
►Connect the appliance only to an electrical outlet protected by an FC protector switch (RCD) with a rated residual current not exceeding 30 mA.
►Never touch the pump and the mains plug with wet hands.
►Avoid water contact with the pump.
►Place the pump at least 60 cm away from the bath tub.
►Under no circumstances should you open the housing of the appliance. Should live connections be touched and/or the electrical and mechanical construction changed, there is a risk of receiving an electric shock.
Insert the plug into a mains power socket.
Handling and operation
In this chapter you receive important information for the handling and operation of the appliance.
NOTICE
►Before using the equipment, make sure the room temperature is right. The bathroom temperature should not be lower than 25°C.
Switching On and Off
Switch the pump on with one press of the function button 3 on the pump.
Switch the pump off with several presses of the function button 3 on the pump.
12 | SLB 450 A1 |