Silvercrest SLB 450 A16 operating instructions Troubleshooting, Malfunction causes and remedies

Page 18

GB

IE

CY

Troubleshooting

Malfunction causes and remedies

The following table will help with localising and eliminating minor malfunctions:

Defect

Possible cause

Solution

 

The plug is not inserted.

Insert the plug into a mains power

 

socket.

 

 

 

Mains power socket does

Check the fuses.

 

not supply any power.

Appliance does

 

The remote control 9

 

not switch on.

On activation, aim the remote control

was not directed at the

 

at the pump .

 

appliance.

 

 

 

The battery in the remote

Insert a new battery into the remote

 

control is empty.

control.

Appliance does not

The battery in the remote

Insert a new battery into the remote

control is empty.

control.

let itself be switched

Function button 3 not

Press the function button repeatedly

off.

 

pressed often enough.

until the appliance switches off.

There are no air

Appliance not switched on.

Switch the appliance on.

 

Properly connect/lock the air hose

bubbles exiting the

Air hose 8 not properly

to the air-bubble mat 6 and to the

air-bubble mat.

connected.

pump .

 

 

 

Suction cups of the air-

Moisten the suction caps on the air-

 

bubble mat are not clinging

 

bubble mat and then press it firmly

 

firmly to the floor of the

Air-bubble mat does

onto the bottom of the bath tub.

bath.

not adhere to the

 

Soap, shampoo or hair

 

floor of the bathtub.

Remove the soap, shampoo or hair

remnants prevent firm

 

remnants/rinse the bath tub out before

 

suction to the bottom of

 

pressing the air-bubble mat down.

 

the bath tub.

 

 

Appliance stops

Cooling time after

After use, allow the pump to cool

for at least 10 minutes and first then

automatically.

operation too short.

restart it if still needed.

 

 

NOTICE

If you cannot solve the problem with the aforementioned methods, please contact Customer Service.

16

SLB 450 A1

Image 18
Contents Spa Bath Mat SLB 450 A1 Spa Bath Mat CY Operating instructionsSLB 450 A1 Appliance-Components IndexIntroduction AppendixIntroduction IntroductionIntroduction Use Restrictions SafetySafety Risk of electrocutionBasic Safety Instructions Appliance must be inaccessible to people in the bathtubInteraction with batteries Appliance-Components Appliance-ComponentsSafety instructions Setting up and connectingSetting up and connecting Items supplied and transport inspectionDisposal technology and are therefore recyclable Requirements on the Installation LocationDisposal of the packaging Needed according to the regionally established regulationsInserting batteries into the remote control Electrical connectionsFixing the air-bubble mat into the bath Using aromatic oils Connecting the air hose Handling and operation Switching On and Off‹ Insert the plug into a mains power socket Handling and operationFunctions Function selection on the pumpFunction selection with the remote control Troubleshooting Cleaning/TroubleshootingCleaning Cleaning the applianceTroubleshooting Malfunction causes and remediesStorage Storage/DisposalStorage/Disposal Disposal of the applianceTechnical data AppendixAppendix Importer WarrantyService Delivery