Shindaiwa HT254EF manual Throttle Cable Free Play, Hour Maintenance, Assembly and Adjustments

Page 12

Assembly and Adjustments

Throttle Cable Free Play

If the unit does not return to idle speed or doesen't reach full rpm, the throttle trigger free play may need to be adjusted as follows:

Throttle Trigger Free Play

1.Measure free play at the end of the throttle trigger. Throttle trigger free play should be approximately 5-7 mm (0.2-0.275"). See Figure 14.

2.If adjustment is necessary, remove the air cleaner cover by loosening the two thumbscrews. Turn the cable adjustment fitting in or out until throttle trigger free play is approximately 5-7 mm (0.2-0.275").

3.Replace the air cleaner cover, and tighten the cover retaining screws securely.

Figure 14

Cable

Adjuster

Figure 15

5-7mm

(0.2-0.275)"

10-Hour Maintenance

(more frequently in dusty conditions)

1.Remove the air cleaner cover by loosening the two thumbscrews. See Figure 16A.

2.Remove and inspect the pre-filter. If the pre-filter is torn or otherwise damaged, replace it with a new one. See Figure 16B.

3.Clean the pre-filter with soap and water. Let dry before reinstalling.

4.Inspect the air cleaner element. If the

element is damaged or distorted, replace it with a new one.

5.Tap filter gently on a hard surface to dislodge debris from element or use compressed air from the inside to blow debris out and away from the air filter ele- ment.

IMPORTANT!

Direct the air stream at the inside face of the filter only!

6. Install the filter element, pre-filter and cover in the reverse order of removal.

CAUTION!

Never operate the unit if the air cleaner assembly is damaged or missing!

12

Figure 16 A

Pre-

Filter Filter

Element

Air Cleaner

Cover

Figure 16 B

Image 12
Contents HT254 Hedge Trimmer Contents IntroductionGeneral Safety Instructions Work SafelyStay Alert Minimize the Risk of FireOperating Precautions Safety Equipment and Labels SpecificationsEmission Control Exhaust & Evaporative Unit DescriptionPrior to use Mixing Fuel Handling FuelStarting Procedure Filling the Fuel TankAfter use Minimize the Risk of FireCranking the Engine Recoil starter can be easily damaged by abuseWhen the motor starts Starting a Flooded EngineStopping the Engine If the engine does not startMaintenance and Adjustments Daily Maintenance/InspectionAir Filter Hour Maintenance Assembly and AdjustmentsThrottle Cable Free Play More frequently in dusty conditions10/15-Hour Maintenance Every 10 to 15 hours of operationGearcase Lubrication BladesEvery 20 Hours Every 100 HoursHour or Annual Maintenance Valve AdjustmentSpark Arrester Screen Maintenance Carburetor AdjustmentAdjusting Engine Idle Idle Speed AdjustmentLong Term Storage Troubleshooting Guide Possible CauseIs the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 99922201033 Page Page Page Page Servicing Information Parts/Serial Number

X7502864200, HT254EF, HT254 specifications

The Shindaiwa X7502864200, also known as the HT254 and HT254EF, is a high-performance hedge trimmer designed for both professional landscapers and avid home gardeners. This tool stands out in the market due to its powerful engine, durability, and advanced features that enhance efficiency and user experience.

One of the key features of the HT254 is its robust, low-emission 25.4cc engine. This engine is designed to deliver exceptional power while adhering to stringent environmental regulations. It not only ensures a longer run time but also contributes to a cleaner, greener working environment. The engine’s low-vibration design reduces operator fatigue, making it ideal for extended use during large landscaping projects.

A notable technology incorporated in the HT254 is the heavy-duty double-sided reciprocating blades. These blades are engineered to provide precise cutting performance, allowing for clean and efficient trimming of hedges and shrubs. The sharp edges ensure that users can handle thicker branches with ease, resulting in a more polished finish. Additionally, the blades are constructed from high-quality materials that resist wear and corrosion, promising longevity and less frequent replacements.

The design of the HT254 also prioritizes user comfort and control. It features an ergonomic handle with a comfortable grip, enabling easy maneuverability during operation. The adjustable cutting angles allow operators to reach various heights and angles without straining, making it suitable for a variety of hedge types and styles.

Another important characteristic of the HT254 is its lightweight construction. Weighing in at just over 10 pounds, the tool is easy to carry and operate, reducing the physical strain often associated with heavier machines. The inclusion of a manual recoil starter ensures that users can start the engine reliably without frustration.

The HT254EF variant adds an electric start option for even more convenience, allowing users to start the engine with just the push of a button. This feature is particularly beneficial for those who may struggle with traditional pull-start mechanisms.

Overall, the Shindaiwa HT254 and HT254EF hedge trimmers are equipped with advanced technologies and exceptional features that elevate their usability and efficiency. Whether for professional landscaping businesses or personal gardening tasks, these tools deliver power, precision, and user-friendly operation, making them a valuable addition to any garden care toolkit.