Shindaiwa X7502864200, HT254EF manual Filling the Fuel Tank, Starting Procedure, After use

Page 8

Mixing Instructions

1.Fill an approved fuel container with half of the required amount of gasoline.

2.Add the proper amount of engine oil to gasoline.

3.Close container and shake to mix oil with gasoline.

4.Add remaining gasoline, close fuel container, and remix.

IMPORTANT!

Spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic fuel shut-off containers to reduce fuel spillage.

After use

•DO NOT store a unit with fuel in its tank. Leaks can occur. Return unused fuel to an approved fuel storage container.

Storage - Fuel storage laws vary by locality. Contact your local govern- ment for the laws affecting your area. As a precaution, store fuel in an ap- proved, airtight container. Store in a well-ventilated, unoccupied building, away from sparks and flames.

IMPORTANT!

Stored fuel may separate. ALWAYS shake fuel container thoroughly be- fore each use.

Filling the Fuel Tank

WARNING!

Minimize the Risk of Fire

■■NEVER smoke or light fires near the engine.

■■ALWAYS stop the engine and allow it to cool before refueling.

■■ALWAYS Wipe all spilled fuel and move at least 3 meters (10 feet) from the fueling point and source before starting.

■■NEVER place flammable material close to the engine muffler.

■■NEVER operate the engine with- out the muffler and spark arrester screen in place and in good working condition.

■■FUEL IS HIGHLY FLAMMABLE.

■■ALWAYS store gasoline in a con- tainer approved for flammable liquids.

■■ALWAYS inspect the unit for fuel leaks before each use. During each refill, check that no fuel leaks from around the fuel cap and/or fuel tank. If fuel leaks are evident, stop using the unit immediately. Fuel leaks must be repaired before using the unit.

■■ALWAYS move the unit at least 3 meters (10 feet) away from a fuel storage area or other readily flam- mable materials before starting the engine.

1.Place the unit on a flat, level surface.

2.Clear any dirt or other debris from around the fuel filler cap.

CAUTION!

Slowly remove the fuel cap only after stopping the engine

3.Remove the fuel cap, and fill the tank with clean, fresh fuel.

4.Reinstall the fuel filler cap and tighten firmly.

5.Wipe away any spilled fuel before starting engine.

Starting Procedure

IMPORTANT!

Engine ignition is controlled by a two-position on-off switch mounted on the throttle body. This switch is typically labeled “I” for ON and “O” for OFF.

WARNING!

The attachment will operate immediately when the engine starts, and could result in possible serious injury. Keep movable parts of the attachment away from objects that could become entangled or thrown, and surfaces that could cause loss of control.

WARNING!

Never start the engine from the operating position.

The cutting attachment will move when the engine accelerates!

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents HT254 Hedge Trimmer Contents IntroductionGeneral Safety Instructions Work SafelyStay Alert Minimize the Risk of FireOperating Precautions Safety Equipment and Labels SpecificationsPrior to use Emission Control Exhaust & EvaporativeUnit Description Mixing Fuel Handling FuelStarting Procedure Filling the Fuel TankAfter use Minimize the Risk of FireCranking the Engine Recoil starter can be easily damaged by abuseWhen the motor starts Starting a Flooded EngineStopping the Engine If the engine does not startAir Filter Maintenance and AdjustmentsDaily Maintenance/Inspection Hour Maintenance Assembly and AdjustmentsThrottle Cable Free Play More frequently in dusty conditions10/15-Hour Maintenance Every 10 to 15 hours of operationGearcase Lubrication BladesEvery 20 Hours Every 100 HoursHour or Annual Maintenance Valve AdjustmentSpark Arrester Screen Maintenance Carburetor AdjustmentLong Term Storage Adjusting Engine IdleIdle Speed Adjustment Troubleshooting Guide Possible CauseIs the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 99922201033 Page Page Page Page Servicing Information Parts/Serial Number

X7502864200, HT254EF, HT254 specifications

The Shindaiwa X7502864200, also known as the HT254 and HT254EF, is a high-performance hedge trimmer designed for both professional landscapers and avid home gardeners. This tool stands out in the market due to its powerful engine, durability, and advanced features that enhance efficiency and user experience.

One of the key features of the HT254 is its robust, low-emission 25.4cc engine. This engine is designed to deliver exceptional power while adhering to stringent environmental regulations. It not only ensures a longer run time but also contributes to a cleaner, greener working environment. The engine’s low-vibration design reduces operator fatigue, making it ideal for extended use during large landscaping projects.

A notable technology incorporated in the HT254 is the heavy-duty double-sided reciprocating blades. These blades are engineered to provide precise cutting performance, allowing for clean and efficient trimming of hedges and shrubs. The sharp edges ensure that users can handle thicker branches with ease, resulting in a more polished finish. Additionally, the blades are constructed from high-quality materials that resist wear and corrosion, promising longevity and less frequent replacements.

The design of the HT254 also prioritizes user comfort and control. It features an ergonomic handle with a comfortable grip, enabling easy maneuverability during operation. The adjustable cutting angles allow operators to reach various heights and angles without straining, making it suitable for a variety of hedge types and styles.

Another important characteristic of the HT254 is its lightweight construction. Weighing in at just over 10 pounds, the tool is easy to carry and operate, reducing the physical strain often associated with heavier machines. The inclusion of a manual recoil starter ensures that users can start the engine reliably without frustration.

The HT254EF variant adds an electric start option for even more convenience, allowing users to start the engine with just the push of a button. This feature is particularly beneficial for those who may struggle with traditional pull-start mechanisms.

Overall, the Shindaiwa HT254 and HT254EF hedge trimmers are equipped with advanced technologies and exceptional features that elevate their usability and efficiency. Whether for professional landscaping businesses or personal gardening tasks, these tools deliver power, precision, and user-friendly operation, making them a valuable addition to any garden care toolkit.
Top Page Image Contents