Shindaiwa HT254EF, X7502864200 manual Operating Precautions

Page 4

Operating Precautions

■■Never transport the hedge trim- mer or leave it unattended with the engine running. An engine that’s running could be accidently acceler- ated causing the blades to oscillate.

■■Make sure that the blade cover is in place when transporting or storing the hedge trimmer.

■■Always make sure that the cut- ter attachment and all handles and guards are properly installed and firmly tightened before operation.

■■Inspect for broken, missing or improperly installed parts or attachments.

■■Never use a cracked or warped cut- ter or cutter bar: replace it with a serviceable one and make sure it fits properly.

■■Make sure there are no missing or loose fasteners, and that the stop switch and throttle controls are work- ing properly.

■■ Make sure there is always good ventilation when operating the hedge trimmer. Fumes from engine exhaust can cause serious injury or death. Never run the engine indoors!

WARNING!

■■Never smoke or light fires near the hedge trimmer. Keep the unit away from excessive heat. Engine fuel is very flammable and fire could lead to serious personal injury or prop- erty damage.

■■Make sure the cutters are cor- rectly adjusted before operating the hedge trimmer (see the sec- tion ”Blades” for cutter adjustment procedures). Never attempt cutter adjustment with the engine running!

■■Before starting the engine, make sure the cutter is not contacting anything.

■■Always confirm safe operation when using the machine.

■■Immediately stop the engine with the stop switch if the machine sud- denly begins to vibrate or shake.

■■Always stop the engine imme- diately and check for damage if you strike a foreign object or if the machine becomes tangled. Do not operate with broken or damaged equipment.

■■When cutting a branch that is under tension, be alert for spring- back so that you will not be struck by the moving branch.

■■If a cutter should bind fast in a cut,

shut off the engine immediately. Push the branch or tree to ease the bind and free the cutter.

■■Always stop the engine and allow it to cool before refueling. Avoid overfilling and wipe off any fuel that may have spilled.

■■To reduce fire hazard, keep the engine and muffler free of debris, leaves, or excessive grease

■■Keep a Solid Stance. Maintain footing and balance at all times. Do not stand on slippery, uneven or unstable surfaces. Do not work in odd positions or on ladders. Do not over reach.

WARNING!

Hedge Clipper blades are very sharp. Touching them may lead to severe personal injury. Avoid touching blades whenever possible, and always wear gloves to protect hands

CAUTION!

■■Do not make unauthorized modifi-

■■Always stop the engine and allow

■■Always maintain the hedge trim-

cations to the hedge trimmer or its

it to cool before refueling. Avoid

components.

overfilling and wipe off any fuel

mer according to this owner’s man-

■■Keep the cutters sharp and prop-

that may have spilled.

ual and follow the recommended

■■Never place flammable material

scheduled maintenance.

erly adjusted.

■■Never modify or disable any of the

■■Never allow the engine to run at

close to the engine muffler and

never run the engine without the

hedge trimmer’s safety devices.

high without a load. Doing so

spark arrestor screen in place.

could damage the engine.

Doing so may cause damage and

■■Always clear your work area of

■■When transporting the hedge

lead to personal injury

■■Always use genuine Shindaiwa

trimmer in a vehicle, tie it down

trash or hidden debris to help

ensure good footing.

securely to prevent fuel spillage or

parts and accessories when repair-

■■Keep the hedge trimmer as clean

damage to the machine.

ing or maintaining this machine.

 

 

as possible. Keep it free of loose

 

 

vegetation, mud, etc.

 

 

 

WARNING!

Inspect handles for damaged or loose attachments before use. NEVER operate a hedge trimmer with damaged or loose handles.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents HT254 Hedge Trimmer Contents IntroductionGeneral Safety Instructions Work SafelyStay Alert Minimize the Risk of FireOperating Precautions Safety Equipment and Labels SpecificationsUnit Description Emission Control Exhaust & EvaporativePrior to use Mixing Fuel Handling FuelStarting Procedure Filling the Fuel TankAfter use Minimize the Risk of FireCranking the Engine Recoil starter can be easily damaged by abuseWhen the motor starts Starting a Flooded EngineStopping the Engine If the engine does not startDaily Maintenance/Inspection Maintenance and AdjustmentsAir Filter Hour Maintenance Assembly and AdjustmentsThrottle Cable Free Play More frequently in dusty conditions10/15-Hour Maintenance Every 10 to 15 hours of operationGearcase Lubrication BladesEvery 20 Hours Every 100 HoursHour or Annual Maintenance Valve AdjustmentSpark Arrester Screen Maintenance Carburetor AdjustmentIdle Speed Adjustment Adjusting Engine IdleLong Term Storage Troubleshooting Guide Possible CauseIs the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 99922201033 Page Page Page Page Servicing Information Parts/Serial Number

X7502864200, HT254EF, HT254 specifications

The Shindaiwa X7502864200, also known as the HT254 and HT254EF, is a high-performance hedge trimmer designed for both professional landscapers and avid home gardeners. This tool stands out in the market due to its powerful engine, durability, and advanced features that enhance efficiency and user experience.

One of the key features of the HT254 is its robust, low-emission 25.4cc engine. This engine is designed to deliver exceptional power while adhering to stringent environmental regulations. It not only ensures a longer run time but also contributes to a cleaner, greener working environment. The engine’s low-vibration design reduces operator fatigue, making it ideal for extended use during large landscaping projects.

A notable technology incorporated in the HT254 is the heavy-duty double-sided reciprocating blades. These blades are engineered to provide precise cutting performance, allowing for clean and efficient trimming of hedges and shrubs. The sharp edges ensure that users can handle thicker branches with ease, resulting in a more polished finish. Additionally, the blades are constructed from high-quality materials that resist wear and corrosion, promising longevity and less frequent replacements.

The design of the HT254 also prioritizes user comfort and control. It features an ergonomic handle with a comfortable grip, enabling easy maneuverability during operation. The adjustable cutting angles allow operators to reach various heights and angles without straining, making it suitable for a variety of hedge types and styles.

Another important characteristic of the HT254 is its lightweight construction. Weighing in at just over 10 pounds, the tool is easy to carry and operate, reducing the physical strain often associated with heavier machines. The inclusion of a manual recoil starter ensures that users can start the engine reliably without frustration.

The HT254EF variant adds an electric start option for even more convenience, allowing users to start the engine with just the push of a button. This feature is particularly beneficial for those who may struggle with traditional pull-start mechanisms.

Overall, the Shindaiwa HT254 and HT254EF hedge trimmers are equipped with advanced technologies and exceptional features that elevate their usability and efficiency. Whether for professional landscaping businesses or personal gardening tasks, these tools deliver power, precision, and user-friendly operation, making them a valuable addition to any garden care toolkit.
Top Page Image Contents