Shindaiwa manual LE261/EVC Lawn Edger

Page 1

ENGLISH

SHINDAIWA OWNER’S/OPERATOR’S MANUAL

LE261/EVC LAWN EDGER

LE261

Minimize the risk of injury to yourself and others! Read this manual and familiarize yourself with the contents. Always wear eye and hearing protection

WARNING! when operating this unit.

Part Number 62721-94310 Rev. 11/06

Image 1

Contents LE261 LE261/EVC Lawn EdgerGeneral Safety Instructions ContentsIntroduction Stay Alert General Safety Instructions The Properly Equipped OperatorUse Good Judgment Be Aware of the Working Environment Safety LabelsPrior to Assembly SpecificationsProduct Description Assembly Throttle Linkage and Ignition Leads Assembly Driveshaft and PowerheadConnect the Outer Tube to the Powerhead Refer to Figures 7 and 7aAssembly Handle Assembly Throttle Cable Free Play AdjustmentConnect the Handle to Outer Tube Mixing Fuel Assembly Attachment Shield and Edger BladeFilling the Fuel Tank Starting the Engine When the Engine StartsStopping the Engine Starting a Warm EngineIdle Speed Adjustment Adjusting Engine IdleChecking Unit Condition Edging with an Hand-held EdgerGeneral Maintenance Adjusting the Blade Cutting DepthHour Maintenance Daily Maintenance10/15-Hour Maintenance Inspect the Gearcase Protector Lubricate the Flexible ShaftEvery 135 hours of operation Long Term StoragePossible Cause Troubleshooting GuideSymptom Possible Cause Remedy Owners Warranty Responsibilities Your Warranty Rights and ObligationsManufacturer’s Warranty Coverage What is Covered by this WarrantyPage