Shindaiwa AH242es, X7502801000 manual Slide the ignition switch to the on position

Page 11

Starting the Engine (continued)

1.Slide the ignition switch to the “I” position.

2.Press the primer bulb until fuel can be seen flowing in the transparent return tube.

IMPORTANT!

The primer system only pushes fuel through the carburetor. Repeatedly pressing the primer bulb will not flood the engine with fuel.

3.Set the choke lever to the CLOSED position if engine is cold.

ON

Slide the ignition switch to the “ON” position

Primer Bulb

Return Tube

Press the primer bulb

4.While holding the outer tube firmly with left hand. Use your other hand to slowly pull the recoil starter han- dle until resistance is felt, then pull quickly to start the engine.

CAUTION!

Do not pull the recoil starter to the end of the rope travel. Pulling the recoil starter to the end of the rope travel can damage the starter.

WARNING!

The cutting blades may move (oscillate) when the engine is started. Keep away from the cutter assembly while starting the engine!

5.When the engine starts, slowly move the choke lever to the “OPEN” posi- tion. If the engine stops after the ini- tial start, close the choke and restart.

Closed

Set the choke lever to CLOSED

Open

Hold

the unit

firmly...

...and pull recoil

Make sure the

starter handle

attachment is clear

upward

of obstructions!

IMPORTANT!

If the engine fails to start after several attempts with the choke in the closed position, the engine may be flooded with fuel. If flooding is suspected, refer to the ”Starting a Flooded Engine” sec- tion of this manual.

Move choke lever to OPEN position when engine starts

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents AH242 Articulated Hedge Trimmer Introduction ContentsSafety and Operational Labels Safety Operating Precautions Operator Safety Safety Equipment and LabelsProduct Description SpecificationsEmission Control Exhaust & Evaporative AssemblyPrior To Assembly Adjusting the Hedge Trimmer Cutter AssemblyThrottle trigger free play Cutter Assembly PositionsExamples of 501 mixing quanti- ties Mixing FuelAfter use Filling the Fuel TankStarting the Engine Mixing InstructionsSlide the ignition switch to the on position Starting a flooded engine When the Engine StartsStopping the Engine Checking Unit ConditionCutting Techniques Using the Hedge Trimmer PreparationsOperation Cutting SequenceFasteners General maintenanceCutter blade adjustment Spark Plug Muffler10/15-Hour maintenance MaintenanceDaily maintenance Hour maintenanceGearcase lubrication Gearcase Grease fitting High Altitude Operation Carburetor AdjustmentMuffler and spark arrester maintenance Engine Break-InLong Term Storage Adjusting Engine IdleIdle Speed Adjustment Troubleshooting Guide Engine is knocking Engine stops abruptly Poor accelerationExceptions Purchased Repair Parts and Accessories 01/2010 Page Page Parts/Serial Number Servicing Information

AH242es, AH242, X7502801000 specifications

The Shindaiwa AH242 and AH242es are advanced two-stroke, gasoline-powered hedge trimmers known for their power and efficiency. These models are designed for both professional landscapers and homeowners, featuring an ergonomic design that allows for extended use without fatigue. The AH242 is characterized by its lightweight construction, weighing only 11.5 lbs, making it easy to maneuver while trimming hedges and shrubs.

One of the standout features of the AH242 is its powerful 21.2cc engine, which delivers outstanding performance while maintaining low emissions. This is achieved through Shindaiwa's refined two-stroke technology, which not only enhances fuel efficiency but also reduces harmful exhaust fumes, contributing to a cleaner working environment. The AH242es version offers similar specifications but includes an Easy Start system, making it easier to start the machine with minimal effort, thus increasing user convenience.

Both models feature a double-sided cutting blade that measures 24 inches, providing an optimal cutting range and ensuring efficiency in trimming dense foliage. The design of the blade incorporates precision grinding technology, resulting in sharp edges that facilitate clean cuts and reduce the risk of plant damage. Moreover, the unique blade design minimizes vibration during operation, enhancing operator comfort and control.

The Shindaiwa AH242 and AH242es also boast an adjustable throttle control, allowing users to manage cutting speed according to the task at hand. This feature not only improves efficiency but also enhances safety by reducing the risk of accidental damage to surrounding plants. Additionally, the models incorporate a durable construction with high-quality materials, ensuring longevity and reliability in various weather conditions.

In terms of maintenance, both hedge trimmers are designed for easy accessibility to critical components, ensuring that servicing can be performed without hassle. The air filter can be easily accessed and cleaned, promoting engine longevity and optimal performance.

Overall, the Shindaiwa AH242, AH242es, and the associated model X7502801000 reflect a commitment to quality engineering, user comfort, and environmental responsibility. Whether for professional landscaping work or home gardening, these hedge trimmers provide powerful performance, innovative technology, and exceptional reliability, making them a top choice in the industry.
Top Page Image Contents