Shindaiwa X7502801000, AH242es manual Mixing Fuel, Examples of 501 mixing quanti- ties

Page 9

Mixing Fuel

WARNING!

Alternative fuels, such as E15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting Shindaiwa requirements are NOT approved for use in Shindaiwa gasoline engines. Use of alternative fuels may cause performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement. Alternative fuels may also cause premature deterioration of fuel lines, gaskets, carburetors and other engine components.

Fuel Requirements

Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (wood alcohol) is NOT approved.

2 Stroke Mixture Oil - A 2-stroke engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345/FD standards must be used. Shindaiwa OneTM 2-Stroke Oil is strongly recommended as it meets this standard and is specifically formulated for use in all Shindaiwa 2-stroke engines. Engine problems due to inadequate lubrication caused by fail- ure to use an ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345/FD certified oil will void the engine warranty.

For increased engine protection, Shindaiwa recommends using Shindaiwa Red ArmorTM engine oil to protect the engine from harmful carbon build up, maintain engine performance, and increase engine life. Shindaiwa Red ArmorTM engine oil exceeds ISO-L-EGD and J.A.S.O. M345/FD performance requirements.

IMPORTANT!

Shindaiwa OneTM 2-Stroke oil or Red ArmorTM engine oil may be mixed at 50:1 ratio for application in all Shindaiwa engines sold in the past, regardless of ratio specified in those manuals.

IMPORTANT!

Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30) days, ninety (90) days when a fuel stabilizer is added. Use of unmixed, improperly mixed, or stale fuel, may cause hard starting, poor performance, or severe engine damage and void the product warranty. Read and follow instructions in the Long Term Storage section of this manual.

Handling Fuel

Examples of 50:1 mixing quanti- ties

DANGER

Fuel is VERY flammable. Use extreme care when mixing, storing or handling or serious personal injury may result.

•Use an approved fuel container.

•DO NOT smoke near fuel.

•DO NOT allow flames or sparks near fuel.

•Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to equalize.

•NEVER refuel a unit when the engine is HOT or RUNNING!

•DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks outdoors over bare ground.

•DO NOT overfill fuel tank. Wipe up spills immediately.

•Securely tighten fuel tank cap and close fuel container after refueling.

•Inspect for fuel leakage. If fuel leakage is found, do not start or operate unit until leakage is repaired.

•Move at least 3m (10 ft.) from refueling location before starting the engine.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents AH242 Articulated Hedge Trimmer Contents Safety and Operational LabelsIntroduction Safety Operating Precautions Operator Safety Safety Equipment and LabelsProduct Description SpecificationsPrior To Assembly AssemblyAdjusting the Hedge Trimmer Cutter Assembly Emission Control Exhaust & EvaporativeThrottle trigger free play Cutter Assembly PositionsExamples of 501 mixing quanti- ties Mixing FuelStarting the Engine Filling the Fuel TankMixing Instructions After useSlide the ignition switch to the on position Stopping the Engine When the Engine StartsChecking Unit Condition Starting a flooded engineOperation Using the Hedge Trimmer PreparationsCutting Sequence Cutting TechniquesCutter blade adjustment Spark Plug General maintenanceMuffler FastenersDaily maintenance MaintenanceHour maintenance 10/15-Hour maintenanceGearcase lubrication Gearcase Grease fitting Muffler and spark arrester maintenance Carburetor AdjustmentEngine Break-In High Altitude OperationAdjusting Engine Idle Idle Speed AdjustmentLong Term Storage Troubleshooting Guide Engine is knocking Engine stops abruptly Poor accelerationExceptions Purchased Repair Parts and Accessories 01/2010 Page Page Parts/Serial Number Servicing Information

AH242es, AH242, X7502801000 specifications

The Shindaiwa AH242 and AH242es are advanced two-stroke, gasoline-powered hedge trimmers known for their power and efficiency. These models are designed for both professional landscapers and homeowners, featuring an ergonomic design that allows for extended use without fatigue. The AH242 is characterized by its lightweight construction, weighing only 11.5 lbs, making it easy to maneuver while trimming hedges and shrubs.

One of the standout features of the AH242 is its powerful 21.2cc engine, which delivers outstanding performance while maintaining low emissions. This is achieved through Shindaiwa's refined two-stroke technology, which not only enhances fuel efficiency but also reduces harmful exhaust fumes, contributing to a cleaner working environment. The AH242es version offers similar specifications but includes an Easy Start system, making it easier to start the machine with minimal effort, thus increasing user convenience.

Both models feature a double-sided cutting blade that measures 24 inches, providing an optimal cutting range and ensuring efficiency in trimming dense foliage. The design of the blade incorporates precision grinding technology, resulting in sharp edges that facilitate clean cuts and reduce the risk of plant damage. Moreover, the unique blade design minimizes vibration during operation, enhancing operator comfort and control.

The Shindaiwa AH242 and AH242es also boast an adjustable throttle control, allowing users to manage cutting speed according to the task at hand. This feature not only improves efficiency but also enhances safety by reducing the risk of accidental damage to surrounding plants. Additionally, the models incorporate a durable construction with high-quality materials, ensuring longevity and reliability in various weather conditions.

In terms of maintenance, both hedge trimmers are designed for easy accessibility to critical components, ensuring that servicing can be performed without hassle. The air filter can be easily accessed and cleaned, promoting engine longevity and optimal performance.

Overall, the Shindaiwa AH242, AH242es, and the associated model X7502801000 reflect a commitment to quality engineering, user comfort, and environmental responsibility. Whether for professional landscaping work or home gardening, these hedge trimmers provide powerful performance, innovative technology, and exceptional reliability, making them a top choice in the industry.
Top Page Image Contents