Shindaiwa EB854RT, X7501970601 Daily Maintenance, Prior to each workday, perform the following

Page 14

Maintenance (continued)

Daily Maintenance

WARNING!

To reduce fire hazard, keep the engine and muffler free of dirt, debris, and leaves.

Prior to each workday, perform the following:

■■Remove all dirt and debris from blower exterior and the engine. Check the cooling fins and air cleaner for clogging and clean as necessary.

CAUTION!

The engine is cooled by air drawn into the air intake cover on the blower housing. The blower fan then pushes the cooling air through an opening in the fan housing, forcing it past the cylinder cooling fins. Failure to keep the cooling system and its passages clear of debris will likely result in engine overheating, a major cause of serious engine problems that can lead to failure.

■■Inspect the engine, tank, and hoses for possible fuel leaks, and repair as necessary.

■■Inspect the entire blower for loose, damaged, or missing components, and repair as necessary.

■■Carefully remove any accumula- tions of dirt or debris from the muffler and fuel tank. Dirt build-up in these areas can lead to engine overheating, fire or premature wear.

Every 10 Hours

(more frequently in dusty conditions)

Air Cleaner

1. Remove the air cleaner cover by

loosening the thumbscrews and lift-

Cover

Element

ing. See Figure 19.

2. Remove and inspect the pre-filter.

If the pre-filter is torn or otherwise

damaged, replace it with a new one.

IMPORTANT!

The blower uses a special high capac- ity dry-type air filter element. The filter should not be cleaned with a liquid cleaner and must NEVER be oiled!

Pre-Filter

Thumbscrews

To remove the cover, loosen the

thumbscrews and lift.

Figure 19

3.Clean the pre-filter with soap and water. Let dry before reinstalling.

4.Inspect the air cleaner element. If the element is damaged or distorted, replace it with a new one.

5.Tap filter gently on a hard surface to dislodge debris from element or use compressed air from the inside to blow debris out and away from the air filter element.

6.Install the filter element, pre-filter and cover in the reverse order of removal.

IMPORTANT!

Direct the air stream at the inside face of the filter only!

CAUTION!

Never operate the blower if the air

cleaner assembly is damaged or

missing!

Every 10/15 Hours

CAUTION!

Never allow dirt or debris to enter the cylinder bore! Before removing the spark plug, thoroughly clean the spark plug and cylinder head area!

Allow the engine to cool before servicing the spark plug! Cylinder threads can be damaged by tighten- ing or loosening the spark plug while the engine is hot!

■■Replace the spark plug annually: Use only NGK CMR5H or equivalent resistor type spark plug of the cor- rect heat range. Set spark plug elec- trode gap to 0.6 mm (0.024 inch).

14

1.Use the spark plug wrench to remove the spark plug. (See Figure 20)

2.Clean and adjust the spark plug gap to 0.6mm (0.024”). If the plug must be replaced, use a NGK CMR5H or equivalent type plug of the correct heat range.

3.Install the spark plug finger-tight in the cylinder head, then tighten it firmly with the spark plug wrench. If a torque wrench is available, torque the spark plug to 16.7-18.6 Nm

(148-165 inch- pounds).

0.6 mm (0.024 in.)

Figure 20

Counter-clockwise

to remove.

Clean the spark plug and check the gap at the electrode.

NGK CMR5H

Page 13 Page 15
Image 14
Page 13 Page 15
Contents EB854 Blower EB854RT Blower EB854 Minimize the risk of injury to yourself and othersIntroduction ContentsSafety and operation labels Stay Alert General Safety InstructionsWork Safely Minimize the Risk of FireSafety Labels Properly Equipped OperatorBe Aware of the Working Environment Emission Control Exhaust & EvaporativeSpecifications Unit DescriptionAssembling the EB854 Blower AssemblyPrior to Assembly Install throttle cable holder just for Assembling the EB854RTMixing Fuel Handling FuelAfter use Filling the Fuel TankStarting the Engine Recoil starter can be damaged by abuseStopping The Engine Starting ProcedureWhen The Engine Starts If The Engine Does Not StartAdjusting The Harness Throttle Control EB854RTUsing The Blower MaintenanceEvery 10 Hours More frequently in dusty conditions Daily MaintenancePrior to each workday, perform the following Every 10/15 HoursSpark Arrester Adjusting Engine Idle Speed Hour Valve AdjustmentCarburetor Adjustment Engine Break-InLong Term Storage Troubleshooting Guide Engine is knocking Top of engine is getting dirty and oily Poor accelerationEngine stops abruptly Excessive vibrationExceptions Purchased Repair Parts and Accessories 01/2010 Page Page Page Page Servicing Information Parts/Serial Number

EB854RT, X7501970601, EB854 specifications

The Shindaiwa EB854, EB854RT, and X7501970601 are remarkable power equipment pieces specifically designed to meet the needs of both professional landscapers and serious homeowners. Known for their robust performance, ergonomic designs, and advanced technologies, these models stand out in the competitive market of backpack blowers.

One of the key features of the Shindaiwa EB854 is its powerful engine, which delivers an impressive air volume and velocity, enabling efficient clearing of debris, leaves, and grass clippings. The model is engineered with a 79.9cc PureFire low emissions engine that not only complies with stringent environmental regulations but also maximizes fuel efficiency, translating to longer work time between refueling.

The EB854RT variant introduces additional flexibility with its rotational control handle. This feature enhances user comfort by allowing operators to adjust the angle of the handle for optimal control and reduced fatigue during extended use. Both the EB854 and EB854RT prioritize user comfort with padded shoulder straps and a padded backrest, ensuring that operators can work for hours without discomfort.

Another significant advancement in the EB854 series is the inclusion of Shindaiwa’s innovative Easy Start technology. This user-friendly feature minimizes recoil effort, making it easier to start the unit with minimal effort, a crucial benefit in cold weather conditions or for individuals of varying physical strength.

The design characteristics of the Shindaiwa EB854 and EB854RT models also reflect a commitment to durability and ease of use. Equipped with a durable housing and high-performance fan, these blowers are built to withstand rigorous usage while maintaining high performance levels. The adjustable air flow and speed settings allow users to tailor their work according to the task at hand, whether it involves moving light debris or tackling more challenging tasks.

Meanwhile, the X7501970601 model signifies a commitment to parts availability and support. As an essential component in the maintenance and operation of Shindaiwa blowers, this model provides customers with the assurance that they can obtain high-quality replacement parts that fit seamlessly with their equipment.

In conclusion, the Shindaiwa EB854, EB854RT, and X7501970601 models exemplify efficient design, advanced technology, and user-oriented features that enhance performance and usability. Whether you are a professional landscaper or a dedicated homeowner, these models deliver the quality and reliability needed to tackle any outdoor cleaning task.
Top Page Image Contents