Shindaiwa X7501970601, EB854RT manual Mixing Fuel, Handling Fuel

Page 9

Mixing Fuel

WARNING!

Alternative fuels, such as E15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting Shindaiwa requirements are NOT approved for use in Shindaiwa gasoline engines. Use of alternative fuels may cause

performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement. Alternative fuels may also cause premature deterioration of fuel lines, gaskets, carburetors and other engine components.

Fuel Requirements

Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (wood

alcohol) is NOT approved.

Hybrid 4TM Mixture Oil - Engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345/FD standards must be used. Shindaiwa highly recommends using Shindaiwa Red ArmorTM engine oil in all Shindaiwa Hybrid 4TM engines to protect the engine from harmful carbon build up, maintain engine performance, and increase engine life. Shindaiwa Red ArmorTM engine oil exceeds ISO-L-EGD and J.A.S.O. M345/FD performance requirements. Engine problems due to inadequate lubrication caused by failure to use an ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345/FD certified oil will void the engine warranty.

 

Examples of 50:1 mixing quantities

IMPORTANT!

Shindaiwa Red ArmorTM engine oil may be mixed at 50:1 ratio for application in all Shindaiwa engines sold in the past, regardless of ratio specified in those manuals.

IMPORTANT!

Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30)

days, ninety (90) days when a fuel stabilizer is added. Use of unmixed, improperly mixed, or stale fuel, may cause hard starting, poor performance, or severe engine damage and void the product warranty. Read and follow instructions in the Long Term Storage section of this manual.

Handling Fuel

DANGER

Fuel is VERY flammable. Use extreme care when mixing, storing or handling or serious personal injury may result.

•Use an approved fuel container.

•DO NOT smoke near fuel.

•DO NOT allow flames or sparks near fuel.

•Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to equalize.

•NEVER refuel a unit when the engine is HOT or RUNNING!

•DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks outdoors over bare ground.

•DO NOT overfill fuel tank. Wipe up spills immediately.

•Securely tighten fuel tank cap and close fuel container after refueling.

•Inspect for fuel leakage. If fuel leakage is found, do not start or operate unit until leakage is repaired.

•Move at least 3m (10 ft.) from refueling location before starting the engine.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents EB854 Minimize the risk of injury to yourself and others EB854 Blower EB854RT BlowerContents Safety and operation labelsIntroduction Work Safely General Safety InstructionsStay Alert Minimize the Risk of FireProperly Equipped Operator Safety LabelsEmission Control Exhaust & Evaporative Be Aware of the Working EnvironmentUnit Description SpecificationsAssembly Prior to AssemblyAssembling the EB854 Blower Assembling the EB854RT Install throttle cable holder just forHandling Fuel Mixing FuelStarting the Engine Filling the Fuel TankAfter use Recoil starter can be damaged by abuseWhen The Engine Starts Starting ProcedureStopping The Engine If The Engine Does Not StartThrottle Control EB854RT Adjusting The HarnessMaintenance Using The BlowerPrior to each workday, perform the following Daily MaintenanceEvery 10 Hours More frequently in dusty conditions Every 10/15 HoursSpark Arrester Carburetor Adjustment Hour Valve AdjustmentAdjusting Engine Idle Speed Engine Break-InLong Term Storage Troubleshooting Guide Engine is knocking Engine stops abruptly Poor accelerationTop of engine is getting dirty and oily Excessive vibrationExceptions Purchased Repair Parts and Accessories 01/2010 Page Page Page Page Parts/Serial Number Servicing Information

EB854RT, X7501970601, EB854 specifications

The Shindaiwa EB854, EB854RT, and X7501970601 are remarkable power equipment pieces specifically designed to meet the needs of both professional landscapers and serious homeowners. Known for their robust performance, ergonomic designs, and advanced technologies, these models stand out in the competitive market of backpack blowers.

One of the key features of the Shindaiwa EB854 is its powerful engine, which delivers an impressive air volume and velocity, enabling efficient clearing of debris, leaves, and grass clippings. The model is engineered with a 79.9cc PureFire low emissions engine that not only complies with stringent environmental regulations but also maximizes fuel efficiency, translating to longer work time between refueling.

The EB854RT variant introduces additional flexibility with its rotational control handle. This feature enhances user comfort by allowing operators to adjust the angle of the handle for optimal control and reduced fatigue during extended use. Both the EB854 and EB854RT prioritize user comfort with padded shoulder straps and a padded backrest, ensuring that operators can work for hours without discomfort.

Another significant advancement in the EB854 series is the inclusion of Shindaiwa’s innovative Easy Start technology. This user-friendly feature minimizes recoil effort, making it easier to start the unit with minimal effort, a crucial benefit in cold weather conditions or for individuals of varying physical strength.

The design characteristics of the Shindaiwa EB854 and EB854RT models also reflect a commitment to durability and ease of use. Equipped with a durable housing and high-performance fan, these blowers are built to withstand rigorous usage while maintaining high performance levels. The adjustable air flow and speed settings allow users to tailor their work according to the task at hand, whether it involves moving light debris or tackling more challenging tasks.

Meanwhile, the X7501970601 model signifies a commitment to parts availability and support. As an essential component in the maintenance and operation of Shindaiwa blowers, this model provides customers with the assurance that they can obtain high-quality replacement parts that fit seamlessly with their equipment.

In conclusion, the Shindaiwa EB854, EB854RT, and X7501970601 models exemplify efficient design, advanced technology, and user-oriented features that enhance performance and usability. Whether you are a professional landscaper or a dedicated homeowner, these models deliver the quality and reliability needed to tackle any outdoor cleaning task.
Top Page Image Contents