Shindaiwa LE254, X7502825800 manual Specifications, Torque

Page 5

Product Description

Using the illustration as a guide, familiarize yourself with your machine and its various components. Understanding your machine helps ensure top performance, long service life and safer operation.

Throttle Interlock

lever

Ignition switch

Grip

 

Handle

Cutting

attachment shield

Shaft tube

Fuel tank

Throttle

Trigger

WARNING!

Do not make unauthorized modifications or alterations to any of these units or their components.

Edger blade

Gearcase

 

Specifications

Engine Model

LE254

Dry weight (Including attachments)

6.3 kg / 14.0 lb.

Engine type

4-cycle, vertical cylinder, air cooled

Bore x stroke

34 x 27 mm / 1.3 x 1.1 in.

Displacement

24.5 cc / 1.5 cu. in.

Fuel/oil ratio

50:1 with *ISO-L-EGD or JASO FD class engine oil

Carburetor type

Diaphragm-type

Fuel tank capacity

590 ml / 20.0 oz.

Ignition

One-piece electronic, program contolled

Spark plug

NGK CMR5H

Electrode Gap

0.6 mm / 0.024 in.

Torque

16.7 - 18.6 N∙m (148-165 in • lbf)

Air cleaner type

Foam pre-filter; sealed felt main filter

Starting method

Recoil

Stopping method

Slide switch

Transmission type

Automatic, centrifugal clutch w/bevel gear

Edger Blade

7.75 inch/197 mm Steel Edger Blade

Idle Speed (RPM)

3,000 RPM

Clutch Engagement Speed (RPM)

4,100 RPM

Wide Open Throttle (RPM)

10,500 RPM

Specifications are subject to change without notice.

IMPORTANT!

This spark ignition system complies with the Canadian standard ICES-002.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Lawn Edger Operational and Warning Labels ContentsIntroduction Product Description SafetyWork Safely Stay AlertBe aware of the working environment Properly equipped operatorTorque SpecificationsPrior to assembly AssemblyEmission Control exhaust & evaporative Mounting the cutting attachment shield and edger bladeRemove the air cleaner cover Adjust Throttle Trigger Free PlayTurn the cable adjuster in or out as Mixing FuelMinimize the Risk of Fire Filling the fuel tankAfter use Never start the engine from the operating position When the Engine StartsStarting the Engine Stopping the Engine Slide the ignition switch toChecking Unit Condition Starting a Flooded EngineAdjusting blade cutting depth Using a hand-held edgerTo adjust blade height OperationMaintenance Remove and replace the fuel filter element Hour MaintenanceDirect the air stream at the inside face Filter only Lubricate the Flexible Shaft Gearcase lubrication Hour MaintenanceWith index hole in shaft tube SecurelyValve Adjustment By a Shindaiwa-trained service technicianSpark Arrester Screen Maintenance Carburetor AdjustmentReplacing the Edger Blade Adjusting Engine IdleIdle Speed Adjustment Long Term Storage Possible Cause Troubleshooting GuideIs the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 01/2010 Page Page Page T13413001001-T13413999999 Servicing Information
Top Page Image Contents