Shindaiwa LE254 Mixing Fuel, Adjust Throttle Trigger Free Play, Remove the air cleaner cover

Page 7

Assembly (continued)

Adjust Throttle Trigger Free Play

The throttle trigger free play should be approximately 4 - 6 mm (3/16” - 1/4”). Make sure that the throttle lever oper- ates smoothly without binding. If it becomes necessary to adjust the lever free play, follow the procedures and illustrations that follow.

1.

Loosen the air cleaner cover knob

4-6 mm

(3/16”-1/4”)

 

and remove the air cleaner cover.

Throttle Trigger

2.

Turn the cable adjuster in or out as

Free Play

 

required to obtain proper free play

 

 

 

 

 

 

4-6 mm.

 

3.

Reinstall the air cleaner cover.

 

Remove air cleaner cover

Cable

Adjuster Adjust as required for 4-6 mm free play

Mixing Fuel

WARNING!

Alternative fuels, such as E15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting Shindaiwa require- ments are NOT approved for use in Shindaiwa gasoline engines. Use of alternative fuels may cause performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement. Alternative fuels may also cause premature deterioration of fuel lines, gaskets, carbure- tors and other engine components.

Fuel Requirements

Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (wood alcohol) is NOT approved.

Hybrid 4TM Mixture Oil - Engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345/FD standards must be used. Shindaiwa highly recommends using Shindaiwa Red ArmorTM engine oil in all Shindaiwa Hybrid 4TM engines to protect the engine from harmful carbon build up, maintain engine performance, and increase engine life. Shindaiwa Red ArmorTM engine oil exceeds ISO-L-EGD and J.A.S.O. M345/FD performance requirements. Engine problems

due to inadequate lubrication caused by failure to use an ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345/FD certi- fied oil will void the engine warranty.

 

Examples of 50:1 mixing quantities

IMPORTANT!

Shindaiwa Red ArmorTM engine oil may be mixed at 50:1 ratio for application in all Shindaiwa engines sold in the past, regardless of ratio specified in those manuals.

IMPORTANT!

Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30) days, ninety (90) days when a fuel stabilizer is added. Use of unmixed, improp- erly mixed, or stale fuel, may cause hard starting, poor performance, or severe engine damage and void the product warranty. Read and follow instructions in the Long Term Storage section of this manual.

7

Image 7
Contents Lawn Edger Introduction ContentsOperational and Warning Labels Stay Alert SafetyProduct Description Work SafelyBe aware of the working environment Properly equipped operatorTorque SpecificationsMounting the cutting attachment shield and edger blade AssemblyPrior to assembly Emission Control exhaust & evaporativeMixing Fuel Adjust Throttle Trigger Free PlayRemove the air cleaner cover Turn the cable adjuster in or out asAfter use Filling the fuel tankMinimize the Risk of Fire Starting the Engine When the Engine StartsNever start the engine from the operating position Starting a Flooded Engine Slide the ignition switch toStopping the Engine Checking Unit ConditionOperation Using a hand-held edgerAdjusting blade cutting depth To adjust blade heightMaintenance Direct the air stream at the inside face Filter only Hour MaintenanceRemove and replace the fuel filter element Securely Gearcase lubrication Hour MaintenanceLubricate the Flexible Shaft With index hole in shaft tubeValve Adjustment By a Shindaiwa-trained service technicianSpark Arrester Screen Maintenance Carburetor AdjustmentIdle Speed Adjustment Adjusting Engine IdleReplacing the Edger Blade Long Term Storage Possible Cause Troubleshooting GuideIs the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 01/2010 Page Page Page T13413001001-T13413999999 Servicing Information