Shindaiwa M254 manual Safety, Work Safely Stay Alert, Use Good Judgment

Page 3

Read and follow this manual,

Always wear a hard hat to

This product conducts electricity.

make sure anyone using the unit

reduce the risk of head injuries

Keep the product and/or operator

does likewise. Failure to do so

during operation of this machine.

a minimum distance of 15 feet

could result in serious personal

In addition, always wear eye and

(4.5 meters) away from electrical

injury or machine failure. Keep

hearing protection. Shindaiwa

sources and power lines.

this manual for future reference.

recommends wearing a face

 

 

shield as additional face and eye

 

 

protection.

Keep bystanders at least 50 feet

 

 

 

 

(15 meters) away from the operat-

Safety

 

ing unit to reduce the risk of being

 

struck by falling objects or thrown

Work Safely

Stay Alert

debris.

 

Attachments for this unit operate at

You must be physically and mentally fit

WARNING!

very high speeds and can do serious

to operate this unit safely.

damage or injury if they are misused

 

Never operate

or abused. Never allow a person without

WARNING!

power equipment of any

training or instruction to operate this

Never make unauthorized

kind if you are tired or if

unit!

attachment installations.

you are under the influence of alco-

 

 

 

hol, drugs, medication or any other

 

 

substance that could affect your

 

 

ability or judgement.

WARNING!

Use Good Judgment

ALWAYS wear eye protection to shield against thrown objects. ALWAYS wear hearing protection devices when operating this unit. Pro- longed exposure to excessive noise is fatiguing and could lead to impaired hearing. The use of proper ear protec- tion can reduce this potential hazard NEVER operate the engine when trans- porting the unit. Make sure cutter safety guards are in place when transporting this unit.

NEVER operate the engine indoors! Make sure there is always good ven- tilation. Fumes from engine exhaust can cause serious injury or death.

ALWAYS make sure there are no missing or loose fasteners and that the stop switch and throttle controls are working properly.

ALWAYS use the proper cutting tool for the job.

ALWAYS clear your work area of trash or hidden debris that could be thrown back at you or toward a bystander.

ALWAYS make sure the cutting attachment tool is properly installed and firmly tightened before operation. NEVER use a cracked or warped cutting attachment: replace it with a serviceable one and make sure it fits properly.

ALWAYS stop the engine immedi- ately if it suddenly begins to vibrate or shake. Inspect for broken, miss- ing or improperly installed parts or attachments.

ALWAYS keep the unit as clean as practical. Keep it free of loose vegeta- tion, mud, etc.

ALWAYS hold the unit firmly with both hands when cutting or trimming, and maintain control at all times. ALWAYS keep the handles clean. ALWAYS disconnect the spark plug wire before performing any mainte- nance work.

Before starting the engine make sure the cutting attachment is not contact- ing anything.

ALWAYS stop the engine immedi- ately and check for damage if you strike a foreign object or if the unit becomes tangled. Do not operate with broken or damaged equipment. ALWAYS maintain the Multipurpose Engine according to this owner’s manual and follow the recom- mended scheduled maintenance. NEVER allow the engine to run at high RPM without a load. Doing so could damage the engine. Always use genuine Shindaiwa parts and accessories when repair- ing or maintaining this unit.

Never modify or disable any of the unit’s devices. Use only Shindaiwa genuine parts for repairs and maintenance.

WHEN transporting the unit in a vehicle, tie it down securely to pre- vent damage and fuel spillage. Never permit a person without training or instruction to repair or operate this machine.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents M254 Multipurpose Tool Carrier Contents IntroductionOperational and warning labels Safety Work Safely Stay AlertUse Good Judgment Product Description Safety LabelsEmission Control Exhaust & Evaporative SpecificationsThrottle lever free play Assembly and adjustmentsPrior to assembly HandleDisassembling the tube sections Assembling tube sectionsFuel Requirements Mixing FuelFilling the Fuel Tank After useMinimize the Risk of Fire Starting the Engine When the Engine StartsChecking Unit Condition Stopping the EngineOperation Starting a Flooded EngineMaintenance More frequently in dusty conditions Daily maintenanceHour maintenance Prior to each work day, perform the following10/15 hour maintenance Remove and clean or replace the spark plugRemove and replace the fuel filter element Valve adjustment High Altitude Operation Carburetor AdjustmentMuffler Maintenance Engine Break-InAdjusting Engine Idle Idle Speed AdjustmentLong Term Storage Troubleshooting Guide Engine is knocking Is the engine overheating?Top of engine is getting dirty and oily Poor accelerationEngine stops abruptly Engine difficult to shut offExceptions 99922201031 02/05/2010 01/2010 Parts/Serial Number Servicing Information

M254 specifications

The Shindaiwa M254 is a well-rounded, performance-driven professional-grade brushcutter designed to tackle a wide range of landscaping tasks with ease. Renowned for its efficiency and reliability, the M254 is an ideal choice for both small and large-scale land maintenance projects.

One of the standout features of the Shindaiwa M254 is its powerful 25.4 cc two-stroke engine. This robust engine provides exceptional power and torque, allowing users to cut through thick grass, weeds, and brush with minimal effort. With a lightweight design, the M254 ensures that operators can work for extended periods without experiencing fatigue, making it an excellent tool for long days on the job.

Equipped with a unique Easy Start technology, the M254 engine allows for effortless starting, reducing the frustration often associated with pull-start systems. This innovative feature is a significant advantage for professionals who value efficiency and time management in their landscaping tasks.

The ergonomic design of the M254 includes a comfortable handle that helps reduce vibration, enhancing user experience and reducing strain during extended use. The curved shaft design allows for improved maneuverability, especially in tight spots and around obstacles. Additionally, the adjustable handle ensures proper posture and control, further contributing to an ergonomic experience.

Versatility is another hallmark of the Shindaiwa M254, as it is compatible with a variety of attachments, including trimmers, brush blades, and various cutting heads. This adaptability makes it suitable for different landscaping applications, from trimming grass along edges to clearing thicker brush.

The M254 also features a commercial-grade air filtration system that enhances engine longevity by keeping debris and dirt out of the engine. This design reduces the frequency of maintenance and ensures more extended periods of reliable performance.

In summary, the Shindaiwa M254 stands out as an exceptional brushcutter with its powerful engine, ergonomic design, and versatile attachment capabilities. Ideal for both professionals and serious hobbyists, it provides the reliability and efficiency needed to excel in various landscaping tasks. With features designed for comfort and ease of use, the M254 is a valuable addition to any lawn care arsenal.
Top Page Image Contents