Shindaiwa M254 manual Filling the Fuel Tank, After use, Minimize the Risk of Fire

Page 9

Mixing Instructions

1.Fill an approved fuel container with half of the re- quired amount of gasoline.

2.Add the proper amount of engine oil to gasoline.

3.Close container and shake to mix oil with gasoline.

4.Add remaining gasoline, close fuel container, and remix.

Storage - Fuel storage laws vary by locality. Contact your local government for the laws affecting your area. As a precaution, store fuel in an approved, airtight con- tainer. Store in a well-ventilated, unoccupied building, away from sparks and flames.

IMPORTANT!

Spilled fuel is a leading cause of hydrocarbon emis- sions. Some states may require the use of automatic fuel shut-off containers to reduce fuel spillage.

After use

•DO NOT store a unit with fuel in its tank. Leaks can occur. Return unused fuel to an approved fuel storage container.

IMPORTANT!

Stored fuel may separate. ALWAYS shake fuel con- tainer thoroughly before each use.

Filling the Fuel Tank

WARNING!

Minimize the Risk of Fire

■■NEVER smoke or light fires near the engine.

■■ALWAYS stop the engine and allow it to cool before refueling.

■■ALWAYS Wipe all spilled fuel and move at least 3 meters (10 feet) from the fueling point and source before starting.

■■NEVER place flammable material close to the engine muffler.

■■NEVER operate the engine without the muffler and spark arrester screen in place and in good working condition.

■■FUEL IS HIGHLY FLAMMABLE.

■■ALWAYS store gasoline in a container approved for flammable liquids.

■■ALWAYS inspect the unit for fuel leaks before each use. During each refill, check that no fuel leaks from around the fuel cap and/or fuel tank.

If fuel leaks are evident, stop using the unit imme- diately. Fuel leaks must be repaired before using the unit.

■■ALWAYS move the unit at least 3 meters (10 feet) away from a fuel storage area or other readily flam- mable materials before starting

the engine.

1.Place the blower on a flat, level surface.

2.Clear any dirt or other debris from around the fuel filler cap.

CAUTION!

Slowly remove the fuel cap only after stopping the engine.

3.Remove the fuel cap, and fill the tank with clean, fresh fuel.

4.Reinstall the fuel filler cap and tighten firmly.

5.Wipe away any spilled fuel before starting the blower.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents M254 Multipurpose Tool Carrier Contents IntroductionOperational and warning labels Safety Work Safely Stay AlertUse Good Judgment Product Description Safety LabelsEmission Control Exhaust & Evaporative SpecificationsPrior to assembly Assembly and adjustmentsHandle Throttle lever free playDisassembling the tube sections Assembling tube sectionsFuel Requirements Mixing FuelFilling the Fuel Tank After useMinimize the Risk of Fire Starting the Engine When the Engine StartsOperation Stopping the EngineStarting a Flooded Engine Checking Unit ConditionMaintenance Hour maintenance Daily maintenancePrior to each work day, perform the following More frequently in dusty conditions10/15 hour maintenance Remove and clean or replace the spark plugRemove and replace the fuel filter element Valve adjustment Muffler Maintenance Carburetor AdjustmentEngine Break-In High Altitude OperationAdjusting Engine Idle Idle Speed AdjustmentLong Term Storage Troubleshooting Guide Engine is knocking Is the engine overheating?Engine stops abruptly Poor accelerationEngine difficult to shut off Top of engine is getting dirty and oilyExceptions 99922201031 02/05/2010 01/2010 Parts/Serial Number Servicing Information

M254 specifications

The Shindaiwa M254 is a well-rounded, performance-driven professional-grade brushcutter designed to tackle a wide range of landscaping tasks with ease. Renowned for its efficiency and reliability, the M254 is an ideal choice for both small and large-scale land maintenance projects.

One of the standout features of the Shindaiwa M254 is its powerful 25.4 cc two-stroke engine. This robust engine provides exceptional power and torque, allowing users to cut through thick grass, weeds, and brush with minimal effort. With a lightweight design, the M254 ensures that operators can work for extended periods without experiencing fatigue, making it an excellent tool for long days on the job.

Equipped with a unique Easy Start technology, the M254 engine allows for effortless starting, reducing the frustration often associated with pull-start systems. This innovative feature is a significant advantage for professionals who value efficiency and time management in their landscaping tasks.

The ergonomic design of the M254 includes a comfortable handle that helps reduce vibration, enhancing user experience and reducing strain during extended use. The curved shaft design allows for improved maneuverability, especially in tight spots and around obstacles. Additionally, the adjustable handle ensures proper posture and control, further contributing to an ergonomic experience.

Versatility is another hallmark of the Shindaiwa M254, as it is compatible with a variety of attachments, including trimmers, brush blades, and various cutting heads. This adaptability makes it suitable for different landscaping applications, from trimming grass along edges to clearing thicker brush.

The M254 also features a commercial-grade air filtration system that enhances engine longevity by keeping debris and dirt out of the engine. This design reduces the frequency of maintenance and ensures more extended periods of reliable performance.

In summary, the Shindaiwa M254 stands out as an exceptional brushcutter with its powerful engine, ergonomic design, and versatile attachment capabilities. Ideal for both professionals and serious hobbyists, it provides the reliability and efficiency needed to excel in various landscaping tasks. With features designed for comfort and ease of use, the M254 is a valuable addition to any lawn care arsenal.
Top Page Image Contents