Shindaiwa M254 manual Mixing Fuel, Fuel Requirements

Page 8

Mixing Fuel

WARNING!

Alternative fuels, such as E15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting Shindaiwa requirements are NOT approved for use in Shindaiwa gasoline engines. Use of alternative fuels may cause

performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement. Alternative fuels may also cause premature deterioration of fuel lines, gaskets, carburetors and other engine components.

Fuel Requirements

Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (wood alcohol) is NOT approved.

Hybrid 4TM Mixture Oil - Engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345/FD standards must be used. Shindaiwa highly recommends using Shindaiwa Red ArmorTM engine oil in all Shindaiwa Hybrid 4TM engines to protect the engine from harmful carbon build up, maintain engine performance, and increase engine life. Shindaiwa Red ArmorTM engine oil exceeds ISO-L-EGD and J.A.S.O. M345/FD performance requirements. Engine problems due to inadequate lubrication caused by failure to use an ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345/FD certified oil will void the engine warranty.

 

Examples of 50:1 mixing quantities

IMPORTANT!

Shindaiwa Red ArmorTM engine oil may be mixed at 50:1 ratio for application in all Shindaiwa engines sold in the past, regardless of ratio specified in those manuals.

IMPORTANT!

Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30) days, ninety (90) days when a fuel stabilizer is added. Use of unmixed, improperly mixed, or stale fuel, may cause hard starting, poor performance, or severe engine damage and void the product warranty. Read and follow instructions in the Long Term Storage section of this manual.

Handling Fuel

DANGER

Fuel is VERY flammable. Use extreme care when mixing, storing or handling or serious personal injury may result.

•Use an approved fuel container.

•DO NOT smoke near fuel.

•DO NOT allow flames or sparks near fuel.

•Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to equalize.

•NEVER refuel a unit when the engine is HOT or RUNNING!

•DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks outdoors over bare ground.

•DO NOT overfill fuel tank. Wipe up spills immediately.

•Securely tighten fuel tank cap and close fuel container after refueling.

•Inspect for fuel leakage. If fuel leakage is found, do not start or operate unit until leakage is repaired.

•Move at least 3m (10 ft.) from refueling location before starting the engine.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents M254 Multipurpose Tool Carrier Operational and warning labels ContentsIntroduction Use Good Judgment SafetyWork Safely Stay Alert Safety Labels Product DescriptionSpecifications Emission Control Exhaust & EvaporativeAssembly and adjustments Prior to assemblyHandle Throttle lever free playAssembling tube sections Disassembling the tube sectionsMixing Fuel Fuel RequirementsMinimize the Risk of Fire Filling the Fuel TankAfter use When the Engine Starts Starting the EngineStopping the Engine OperationStarting a Flooded Engine Checking Unit ConditionMaintenance Daily maintenance Hour maintenancePrior to each work day, perform the following More frequently in dusty conditionsRemove and replace the fuel filter element 10/15 hour maintenanceRemove and clean or replace the spark plug Valve adjustment Carburetor Adjustment Muffler MaintenanceEngine Break-In High Altitude OperationLong Term Storage Adjusting Engine IdleIdle Speed Adjustment Troubleshooting Guide Is the engine overheating? Engine is knockingPoor acceleration Engine stops abruptlyEngine difficult to shut off Top of engine is getting dirty and oilyExceptions 99922201031 02/05/2010 01/2010 Servicing Information Parts/Serial Number

M254 specifications

The Shindaiwa M254 is a well-rounded, performance-driven professional-grade brushcutter designed to tackle a wide range of landscaping tasks with ease. Renowned for its efficiency and reliability, the M254 is an ideal choice for both small and large-scale land maintenance projects.

One of the standout features of the Shindaiwa M254 is its powerful 25.4 cc two-stroke engine. This robust engine provides exceptional power and torque, allowing users to cut through thick grass, weeds, and brush with minimal effort. With a lightweight design, the M254 ensures that operators can work for extended periods without experiencing fatigue, making it an excellent tool for long days on the job.

Equipped with a unique Easy Start technology, the M254 engine allows for effortless starting, reducing the frustration often associated with pull-start systems. This innovative feature is a significant advantage for professionals who value efficiency and time management in their landscaping tasks.

The ergonomic design of the M254 includes a comfortable handle that helps reduce vibration, enhancing user experience and reducing strain during extended use. The curved shaft design allows for improved maneuverability, especially in tight spots and around obstacles. Additionally, the adjustable handle ensures proper posture and control, further contributing to an ergonomic experience.

Versatility is another hallmark of the Shindaiwa M254, as it is compatible with a variety of attachments, including trimmers, brush blades, and various cutting heads. This adaptability makes it suitable for different landscaping applications, from trimming grass along edges to clearing thicker brush.

The M254 also features a commercial-grade air filtration system that enhances engine longevity by keeping debris and dirt out of the engine. This design reduces the frequency of maintenance and ensures more extended periods of reliable performance.

In summary, the Shindaiwa M254 stands out as an exceptional brushcutter with its powerful engine, ergonomic design, and versatile attachment capabilities. Ideal for both professionals and serious hobbyists, it provides the reliability and efficiency needed to excel in various landscaping tasks. With features designed for comfort and ease of use, the M254 is a valuable addition to any lawn care arsenal.
Top Page Image Contents