Shindaiwa 81532, LE242 manual Emission System Warranty Statement

Page 17

Emission System Warranty Statement

Your Warranty Rights and

Obligations

The California Air Resources Board, the U.S. Environmental Protection Agency and Shindaiwa Corp. are pleased to explain the emission control system warranty on your new small off-road (non-road) engine.

In California, new small off-road engines must be designed, built, and equipped to meet the State’s stringent anti-smog standards. In other states, new 1997 and later non-road engines must meet the Federal EPA’s stringent anti-smog standards. Shindaiwa Corp. must warrant the emission control system on your small off-road engine for the periods of time listed below, provided there has been no abuse, neglect, or improper mainte- nance of your small off-road engine.

Your engine emission control system includes parts such as the carburetor, the ignition system and, if equipped, the catalytic converter. These components are specifically listed below.

Where a warrantable condition exists, Shindaiwa Corp. will repair your small off-road engine at no cost to you including diagnosis, parts, and labor.

Owners Warranty

Responsibilities

As the small off-road engine owner, you are responsible for the performance of the required maintenance listed in this owners manual. Shindaiwa Corp. recommends that you retain all receipts covering maintenance on your small off-road engine, but Shindaiwa Corp. cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance.

As the small off-road engine owner, you should be aware, however, that Shindaiwa Corp. may deny you warranty coverage if your small off-road engine or a part has failed due to abuse, neglect, improper maintenance, or unapproved modifications.

You are responsible for presenting your small off-road engine to an authorized Shindaiwa Dealer as soon as a problem ex- ists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days.

If you have any questions regarding your warranty rights and responsibilities, you should contact a Shindaiwa customer service representative at (503) 692-3070 or your local Shindaiwa Dealer.

Manufacturer’s Warranty

Coverage

When sold within the U.S., this engine’s emission control system is warranted for a period of two (2) years from the date this product is first delivered to the original retail purchaser.

During the warranty period, Shindaiwa Corp. will, at their option, repair or replace any defective emission-related compo- nent on this engine. During the original Warranty Period, these Warranty Rights are automatically transferable to subsequent owners of this product.

What is Covered by this

Warranty

1.Carburetor Internal Components

n Throttle Valve, Needle, Jet, Metering Diaphragm

2.Ignition System Components n Ignition Coil

n Flywheel Rotor

3.Catalytic Converter (if originally equipped)

The emission control system for your particular Shindaiwa engine may also include certain related hoses and connectors.

Consequential Damages

In the event that other component parts of this product are damaged by the failure of a warranted part, Shindaiwa Corp. will repair or replace such component parts at no charge to you.

What is Not Covered

nFailures caused by abuse, neglect, or improper maintenance procedures.

nFailures caused by the use of modified or non-approved parts or attachments.

This Warranty is Administered by:

Shindaiwa Inc.

11975 S.W. Herman Rd. Tualatin, OR 97062 (503) 692-3070

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents LE242 Lawn Edger Introduction Safety InstructionsContents Use Good Judgment Safety Instructions Properly Equipped OperatorBe Aware of the Working Environment Safety LabelsProduct Description SpecificationsPrior to Assembly Assembly and Adjustments Assembly and Adjustments Install Gearcase AssemblyAdjust Throttle Lever Free Play Reinstall the air cleaner coverExamples of 501 mixing quantities Mixing FuelFilling the Fuel Tank Starting the Engine Slide the ignition switch to the on position. See FigureWhen the Engine Starts Stopping the Engine Idle Speed AdjustmentChecking Unit Condition Use only authorized Shindaiwa partsAdjusting the Cutting Depth Using a Hand-held EdgerTo adjust blade height Guidelines for Operating the EdgerHour Maintenance General MaintenanceDaily Maintenance Lubricate the Flexible Shaft 10/15-Hour MaintenanceEvery 10 to 15 hours of operation Dealer Inspect the Gearcase ProtectorWith an authorized Shindaiwa servicing Long Term Storage Replacing the Edger BladeEngine does not Start Troubleshooting GuideAdditional Problems Emission System Warranty Statement Page Japan 3167,-731 6696-692 Fax 2481-849-82-81 Fax2220-849-82-81 Teléfono Com.shindaiwa.www Emisión de Sistema del Garantía de Declaración Adicionales Problemas Continuación Diagnostico GuiaPotencia Baja Diagnostico GuiaOrilladora la de Cuchilla la Reemplazar Plazo Largo de AlmacenamientoPolvo de libre Bujía la ReínstaleEngranajes de Caja la de Protector el Inspeccione Mantenimiento horas 135 CadaContinuación Horas 50 Cada Mantenimiento Precaución Horas 50 Cada MantenimientoHoras 10/15 Cada Mantenimiento General Mantenimiento Diario MantenimientoSujetadores BujíaShindaiwa marca de lador Oril para cuchillas sólo Utilice Corte del Profundidad la AjustandoMano de Orillador el Utilizando Motor del Mínima Marcha de Ajuste Unidad la de Condición la VerifiqueMotor del Parada Apagado…motor el arranca Cuando Motor del ArranqueOperación de posición la Desde motor el arranque NuncaPRECAUCIÓN!¡ Combustible de Mezcla Combustible de Tanque el LlenandoDe proporción Engranaje de Caja la de Instalación Acelerador del Holgura la AjusteAjustes y Ensamblaje Ensamblar de Antes EspecificacionesDe normal operación la durante operador Autorizadas no teraciones Al o modificaciones haga NoTrabajo de Area del Alerta Esté Seguridad de EtiquetasDescalzo! máquina la Juicio Buen Use ¡ADVERTENCIAIncendios ContenidoDe Riesgo El Disminuya Cuidado con TrabajeRev 81532 pieza de Número

81532, LE242 specifications

The Shindaiwa 81532 LE242 is a powerful and versatile tool designed for landscape professionals and homeowners alike. Known for its reliability and performance, the LE242 is a lightweight and efficient string trimmer that can tackle a range of tasks, from trimming grass to maintaining garden beds.

One of the standout features of the LE242 is its engine. It is powered by a 21.2cc, 2-stroke, low-emission engine that provides ample power for cutting through thick grass and weeds. The engine's design is optimized for fuel efficiency, allowing users to work longer without constant refueling. This is crucial for landscaping professionals who need to maximize productivity throughout the day.

Ergonomics is another focal point in the design of the LE242. It comes equipped with a comfortable and adjustable handlebars, allowing users to maintain a natural posture while working. The lightweight design of the trimmer, weighing in at approximately 10.8 lbs, reduces user fatigue, making it easier to maneuver over extended periods.

The Shindaiwa LE242 also boasts an advanced starting system. The Easy Start feature minimizes the effort required to pull-start the engine, ensuring that users can get to work without frustration. This feature is particularly appreciated by those who may not be experienced with outdoor power equipment.

In terms of cutting technology, the LE242 is designed with a commercial-grade cutting head that allows for quick line replacement and easy maintenance. The dual-line system provides a wider cutting path, increasing efficiency and reducing the amount of time needed to complete tasks. Additionally, it allows for the use of various line sizes, catering to different cutting needs.

Durability is a key characteristic of Shindaiwa products, and the LE242 is no exception. Built with high-quality materials, it withstands rigorous use and harsh conditions typical of professional landscaping environments. The trimmer's components are designed to resist wear and tear, ensuring a long lifespan with proper care.

In summary, the Shindaiwa 81532 LE242 combines power, efficiency, and user-friendly design, making it an excellent choice for both professionals and DIY landscapers. With its reliable engine, ergonomic features, and durable construction, the LE242 stands out in the competitive market of string trimmers. Whether maintaining large lawns or delicate garden beds, the LE242 is equipped to handle it all with ease.
Top Page Image Contents