Shindaiwa 68241-94310, EB501/EVC manual Specifications, Assembling the Blower

Page 5

SPECIFICATIONS

Model

 

EB501

Dimensions (L x W x H)

...............................................................

330 x 375x 475 mm

Engine Type

2 cycle, catalyst, air cooled gas engine, vertical-cylinder

Bore & Stroke

 

41 x 33 mm (1.6 x 1.3 inches)

Displacement

 

43.6 cc (2.66 cu. inches)

Fuel/oil ratio

Gasoline/oil mixture (50:1 with ISO EGD or JASO FC class

 

 

 

2- cycle EngineOil)

Carburetor

Walbro diaphragm-type with primer pump

Ignition

All transistor electronic ignition system

Spark Plug

 

Champion CJ8

Starting

 

Recoil starter

Stopping

 

Throttle lever (fuel shut-off)

Fuel Tank Capacity

 

2.1 liters (71 oz.)

Exhaust System

 

Spark-arrester muffler

Air Filtration

 

Dry element

Weight (dry; without blower tubes), EB501

8.6 kg (19 lbs.)

Specifications are subject to change without notice.

Prior to Assembly

Before assembling, make sure you have all the components required for a complete unit:

n90° Discharge Tube

nFlexible Tube

nSwivel Tube

nStraight Tube

nNozzle Tube

nHandgrip (removable)

nThree Tube Clamps (115 mm, 100 mm, 85 mm) See figure 2.

Standard Tools

nSpark Plug Wrench

nThree Hex Wrenches (3 mm, 4mm, 5mm)

ASSEMBLING THE BLOWER

1.Place the blower upright on the ground or a sturdy work surface.

2.Fit the 90° discharge tube over the blower outlet port, and secure with the 115mm dia. clamp.

3.Slip the flexible tube over the oppo- site end of the 90° discharge tube, and secure with the 100mm clamp.

4.Push the swivel tube into the flexible tube, and then install and tighten the 85mm clamp over the rotating band on the swivel tube.

5.Slide the handgrip over the swivel tube, and secure with the bolt, washer, and nut.

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents EB501/EVC Blower Introduction ContentsPage Nomenclature Assembling the Blower SpecificationsBalance and performance! Make sure Blower tube installation affects blowerTubes and nozzle are correctly Assembled per above, and that all Connections are tightFuel Requirements Mixing FuelInjury Filling the Fuel TankEngine cover will be hot after blower operation Starting and Stopping the BlowerWhen the Engine Starts Adjusting Engine Idle Speed Adjusting the Harness Operating Tips Using the BlowerDirect the air stream at the inside face of the filter only Routine Maintenance Every 10 HoursDaily Maintenance Every 10/15 Hours Do not nick or perforate fuel tube with wire hookEvery 50 Hours More frequently if reduced performance is notedEvery 135 hours of operation Hour MaintenanceStorage 30 days or longer Troubleshooting Guide What To Check Possible Cause Remedy Troubleshooting GuideWhat To Check Additional ProblemsTroubleshooting Guide What is Covered by this Warranty Manufacturer’s Warranty CoverageWhat is Not Covered Owners Warranty ResponsibilitiesThis Warranty is Administered by Consequential Damages

EB501/EVC, 68241-94310 specifications

The Shindaiwa 68241-94310 model, specifically designed for the EB501 and EVC series, is a high-performance handheld blower that stands out in the landscaping and horticultural industry. Engineered for efficiency, this blower is a tool of choice for professionals looking for reliability and power in their equipment.

One of the main features of the Shindaiwa EB501/EVC blower is its lightweight design, which allows for extended use without causing undue fatigue to the operator. Weighing in at just under ten pounds, it is designed for ease of handling, making it accessible for both seasoned professionals and those new to the gardening and landscaping scene.

The heart of the Shindaiwa EB501 is its powerful 50.2cc two-stroke engine. This engine employs advanced technology to maximize fuel efficiency while delivering consistent and robust airflow. With a maximum air volume of approximately 510 cubic feet per minute (CFM), the blower can easily handle both residential and commercial tasks, from clearing leaves to moving debris.

The innovative design of the EB501 includes a unique fan system that enhances the blower's performance. The fan is engineered to produce a high-velocity air stream, ensuring that even stubborn wet leaves and dirt can be moved effortlessly. Furthermore, the blower features an adjustable throttle that allows users to fine-tune the air speed according to the task, ensuring versatility in operation.

Ergonomically designed, the EB501/EVC comes with a padded shoulder strap that aids in weight distribution, making it comfortable for longer jobs. The control layout is intuitive, which allows for easy operation even while on the move. This user-friendly design is complemented by a simple start mechanism, which is engineered to be hassle-free, making startup quick and efficient.

Another key characteristic of the Shindaiwa 68241-94310 model is its durable construction. Made with high-quality materials, it is built to withstand the rigors of daily use in various conditions. The air filtration system is designed for easy maintenance and extended service life, allowing operators to enjoy a longer-lasting performance without frequent breakdowns.

In conclusion, the Shindaiwa 68241-94310, intended for the EB501 and EVC series, combines power, efficiency, and user-friendly features, making it an ideal choice for both professionals and homeowners alike. Whether tackling large properties or simply maintaining a small garden, this blower offers the performance required to get the job done effectively.
Top Page Image Contents