Shindaiwa 68241-94310, EB501/EVC manual Adjusting Engine Idle Speed

Page 11

ADJUSTING ENGINE IDLE SPEED

1.Start the engine by following the procedures described on the pre- ceding pages. Make sure the thottle lever is in the "idle" position.

2.Run the engine at idle speed until operating temperature is reached (2-3 minutes).

3.Loosen the throttle cable locknut. See figure 9.

4.Turn the cable adjuster in or out until the engine idles smoothly at approximately 2500-3000 rpm.

nTurn the throttle cable adjuster clockwise to decrease engine idle speed.

nTurn the throttle cable adjuster counter-clockwise to increase en- gine idle speed.

5.Tighten the throttle cable locknut securely.

IMPORTANT!

A clean and unrestricted airflow is essential to your blower’s engine performance and durability! Before attempting any carburetor adjust- ments, inspect and clean the engine air filter as described on page 13 of this manual.

Idle De-

Idle

crease

Increase

Cable

Adjuster

48010

 

Throttle Cable

Figure 9

Locknut

IMPORTANT!

Blower tubes and intake cover must be in place while adjusting engine idle! Engine idle speed will also be affected if either the intake cover or blower tubes are blocked or incor- rectly installed!

10

Page 10 Page 12
Image 11
Page 10 Page 12
Contents EB501/EVC Blower Introduction ContentsPage Nomenclature Assembling the Blower SpecificationsAssembled per above, and that all Connections are tight Blower tube installation affects blowerBalance and performance! Make sure Tubes and nozzle are correctlyFuel Requirements Mixing FuelInjury Filling the Fuel TankEngine cover will be hot after blower operation Starting and Stopping the BlowerWhen the Engine Starts Adjusting Engine Idle Speed Adjusting the Harness Operating Tips Using the BlowerDirect the air stream at the inside face of the filter only Routine Maintenance Every 10 HoursDaily Maintenance More frequently if reduced performance is noted Do not nick or perforate fuel tube with wire hookEvery 10/15 Hours Every 50 HoursEvery 135 hours of operation Hour MaintenanceStorage 30 days or longer Troubleshooting Guide What To Check Possible Cause Remedy Troubleshooting GuideWhat To Check Additional ProblemsTroubleshooting Guide What is Covered by this Warranty Manufacturer’s Warranty CoverageConsequential Damages Owners Warranty ResponsibilitiesWhat is Not Covered This Warranty is Administered by

EB501/EVC, 68241-94310 specifications

The Shindaiwa 68241-94310 model, specifically designed for the EB501 and EVC series, is a high-performance handheld blower that stands out in the landscaping and horticultural industry. Engineered for efficiency, this blower is a tool of choice for professionals looking for reliability and power in their equipment.

One of the main features of the Shindaiwa EB501/EVC blower is its lightweight design, which allows for extended use without causing undue fatigue to the operator. Weighing in at just under ten pounds, it is designed for ease of handling, making it accessible for both seasoned professionals and those new to the gardening and landscaping scene.

The heart of the Shindaiwa EB501 is its powerful 50.2cc two-stroke engine. This engine employs advanced technology to maximize fuel efficiency while delivering consistent and robust airflow. With a maximum air volume of approximately 510 cubic feet per minute (CFM), the blower can easily handle both residential and commercial tasks, from clearing leaves to moving debris.

The innovative design of the EB501 includes a unique fan system that enhances the blower's performance. The fan is engineered to produce a high-velocity air stream, ensuring that even stubborn wet leaves and dirt can be moved effortlessly. Furthermore, the blower features an adjustable throttle that allows users to fine-tune the air speed according to the task, ensuring versatility in operation.

Ergonomically designed, the EB501/EVC comes with a padded shoulder strap that aids in weight distribution, making it comfortable for longer jobs. The control layout is intuitive, which allows for easy operation even while on the move. This user-friendly design is complemented by a simple start mechanism, which is engineered to be hassle-free, making startup quick and efficient.

Another key characteristic of the Shindaiwa 68241-94310 model is its durable construction. Made with high-quality materials, it is built to withstand the rigors of daily use in various conditions. The air filtration system is designed for easy maintenance and extended service life, allowing operators to enjoy a longer-lasting performance without frequent breakdowns.

In conclusion, the Shindaiwa 68241-94310, intended for the EB501 and EVC series, combines power, efficiency, and user-friendly features, making it an ideal choice for both professionals and homeowners alike. Whether tackling large properties or simply maintaining a small garden, this blower offers the performance required to get the job done effectively.
Top Page Image Contents