Shindaiwa EB501/EVC, 68241-94310 manual Troubleshooting Guide

Page 18

TROUBLESHOOTING GUIDE

ENGINE DOES NOT START

What To Check

Does the engine crank?

YES

Good compression?

YES

Does the tank contain fresh fuel of the proper grade?

YES

Is fuel filling the fuel primer bulb during priming operations?

YES

Is there spark at the spark plug wire terminal?

YES

Check the spark plug

Possible Cause

Faulty recoil starter. NO Fluid in the crankcase.

Internal damage.

Loose spark plug. NO Excess wear on

cylinder, piston, rings.

Fuel/mixture incorrect, NO stale, contaminated.

Check for clogged fuel NO filter and/or vent.

NO

Faulty ignition ground.

 

If the plug is wet, excess fuel may be in the

cylinder.

The plug may be fouled or improperly gapped.

The plug may be damaged internally or of the wrong size.

Remedy

Consult with an authorized servicing dealer.

Tighten and re-test. Consult with an authorized servicing dealer.

Refill with fresh fuel of the correct mixture (gasoline and ISO EGD

or JASO FC class 2-cycle Engine Oil).

Clean as required; re-start.

Consult with an authorized servicing dealer.

Crank the engine with the plug removed, replace the plug, and re-start.

Clean and re-gap the plug to 0.24 inch (0.6 mm); re-start.

Replace the plug with a

Champion CJ8.

17

Page 17 Page 19
Image 18
Page 17 Page 19
Contents EB501/EVC Blower Contents IntroductionPage Nomenclature Specifications Assembling the BlowerTubes and nozzle are correctly Blower tube installation affects blowerBalance and performance! Make sure Assembled per above, and that all Connections are tightMixing Fuel Fuel RequirementsFilling the Fuel Tank InjuryStarting and Stopping the Blower Engine cover will be hot after blower operationWhen the Engine Starts Adjusting Engine Idle Speed Adjusting the Harness Using the Blower Operating TipsRoutine Maintenance Every 10 Hours Daily MaintenanceDirect the air stream at the inside face of the filter only Every 50 Hours Do not nick or perforate fuel tube with wire hookEvery 10/15 Hours More frequently if reduced performance is notedHour Maintenance Every 135 hours of operationStorage 30 days or longer Troubleshooting Guide Troubleshooting Guide What To Check Possible Cause RemedyAdditional Problems What To CheckTroubleshooting Guide Manufacturer’s Warranty Coverage What is Covered by this WarrantyThis Warranty is Administered by Owners Warranty ResponsibilitiesWhat is Not Covered Consequential Damages

EB501/EVC, 68241-94310 specifications

The Shindaiwa 68241-94310 model, specifically designed for the EB501 and EVC series, is a high-performance handheld blower that stands out in the landscaping and horticultural industry. Engineered for efficiency, this blower is a tool of choice for professionals looking for reliability and power in their equipment.

One of the main features of the Shindaiwa EB501/EVC blower is its lightweight design, which allows for extended use without causing undue fatigue to the operator. Weighing in at just under ten pounds, it is designed for ease of handling, making it accessible for both seasoned professionals and those new to the gardening and landscaping scene.

The heart of the Shindaiwa EB501 is its powerful 50.2cc two-stroke engine. This engine employs advanced technology to maximize fuel efficiency while delivering consistent and robust airflow. With a maximum air volume of approximately 510 cubic feet per minute (CFM), the blower can easily handle both residential and commercial tasks, from clearing leaves to moving debris.

The innovative design of the EB501 includes a unique fan system that enhances the blower's performance. The fan is engineered to produce a high-velocity air stream, ensuring that even stubborn wet leaves and dirt can be moved effortlessly. Furthermore, the blower features an adjustable throttle that allows users to fine-tune the air speed according to the task, ensuring versatility in operation.

Ergonomically designed, the EB501/EVC comes with a padded shoulder strap that aids in weight distribution, making it comfortable for longer jobs. The control layout is intuitive, which allows for easy operation even while on the move. This user-friendly design is complemented by a simple start mechanism, which is engineered to be hassle-free, making startup quick and efficient.

Another key characteristic of the Shindaiwa 68241-94310 model is its durable construction. Made with high-quality materials, it is built to withstand the rigors of daily use in various conditions. The air filtration system is designed for easy maintenance and extended service life, allowing operators to enjoy a longer-lasting performance without frequent breakdowns.

In conclusion, the Shindaiwa 68241-94310, intended for the EB501 and EVC series, combines power, efficiency, and user-friendly features, making it an ideal choice for both professionals and homeowners alike. Whether tackling large properties or simply maintaining a small garden, this blower offers the performance required to get the job done effectively.
Top Page Image Contents