Installation

Installation

STEP  3  Flooring

• The surface to install the refrigerator must support a fully loaded refrigerator.

• To protect the floor, put a large piece of cardboard on each leg of the refrigerator.

• Once the refrigerator is in its final position, do not move it unless necessary to protect the floor. If you have to, use a thick paper or cloth such as old carpets along the movement path.

NOTE

If the refrigerator cannot pass through the entrance due to its size, see the Door removal for entrance section in the Maintenance chapter.

STEP  4  Adjust the levelling legs

CAUTION

The refrigerator must be levelled on a flat, solid floor. Failing to do so can cause damage to the refrigerator or physical injury.

Levelling must be performed with an empty refrigerator. Make sure no food items remain inside the refrigerator.

For safety reasons, adjust the front side a little higher than the rear side.

The refrigerator can be levelled using the front legs that have a special screw (leveller) for levelling purposes. Use a flat-head screwdriver for levelling.

• To adjust the height of the left side: Insert a flat-head screwdriver into the leveller of the left side front leg. Turn the leveller clockwise to raise, or turn it counter clockwise to lower.

• To adjust the height of the right side: Insert a flat-head screwdriver into the leveller of the right side front leg. Turn the leveller clockwise to raise, or turn it counter clockwise to lower.

28  English

Untitled-5 28

2017-07-05 ￿￿ 6:43:13

Page 28
Image 28
Samsung RF28K9070SR/ML manual Flooring, Adjust the levelling legs