Shindaiwa 81644 manual General Maintenance, Daily Maintenance, Hour Maintenance

Page 14

General Maintenance

IMPORTANT!

MAINTENANCE, REPLACEMENT OR REPAIR OF EMISSION CONTROL DEVICES AND SYSTEMS MAY BE PERFORMED BY ANY REPAIR ESTAB- LISHMENT OR INDIVIDUAL; HOWEVER, WARRANTY REPAIRS MUST BE PER- FORMED BY A DEALER OR SERVICE CENTER AUTHORIZED BY SHINDAIWA CORPORATION THE USE OF PARTS THAT ARE NOT EQUIVALENT IN PERFORMANCE AND DURABILITY TO AUTHORIZED PARTS MAY IMPAIR THE EFFECTIVENESS OF THE EMISSION CONTROL SYSTEM AND MAY HAVE

A BEARING ON THE OUTCOME OF A WARRANTY CLAIM.

WARNING!

Before performing any maintenance, repair or cleaning work on the unit, make sure the engine and cutting attachment are completely stopped. Disconnect the spark plug wire before performing service or maintenance work.

WARNING!

Non-standard parts may not operate properly with your unit and may cause damage and lead to personal injury.

NOTE:

Using non-standard replacement parts could invalidate your Shindaiwa warranty.

Muffler

This unit must never be operated with a faulty or missing spark arrester or muffler. Make sure the muffler is well secured and in good condition. A worn or damaged muffler is a fire hazard and may also cause hearing loss.

Spark Plug

Keep the spark plug and wire connections tight and clean.

Fasteners

Make sure nuts, bolts, and screws (except carburetor adjusting screws) are tight.

Blades

Keep blades sharp and check blade condition frequently. If a blade’s perfor- mance changes suddenly, stop the engine and check the blade for cracks or other damage. Replace a damaged blade

IMMEDIATELY!

WARNING!

nNever repair a damaged blade by welding, straightening, or by modify- ing its shape. An altered blade may break during operation, resulting in serious personal injury.

nBlades are not interchangeable between Shindaiwa edgers and trim- mer/brushcutter models. Operating any unit with a blade or attachment not approved for that unit can be haz- ardous and may cause serious injury.

Daily Maintenance

Prior to each work day, perform the following:

nRemove dirt or debris from the engine, check the cooling fins and air cleaner for clogging and clean them as necessary.

nCarefully remove any accumulation of dirt or debris from the muffler or the fuel tank. Dirt build-up in these areas could cause engine overheating, induce premature wear, or create a fire hazard.

nCheck for loose or missing screws or components. Make sure the cutting at- tachment is securely fastened.

nCheck the entire unit for leaking fuel or grease.

10-Hour Maintenance

Unscrew

Remove and

Fastener

clean or replace

 

the element

Figure 26

 

Every 10 hours of operation (more fre- quently in dusty or dirty conditions):

Remove the air cleaner element. See Figure

26.Clean or replace as necessary. To clean element: wash it thoroughly in soap and water. Let it dry before reinstalling the element.

CAUTION!

Do not operate the unit if the air cleaner or element is damaged, or if the element is wet.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents C242 Brushcutter Introduction ContentsSafety Instructions Properly Equipped Operator Always use the proper cutting tool for the jobSafety Labels Be Aware of the Working EnvironmentProduct Description Specifications C242Prior to Assembly Sub-Shield C242 AssemblyCutting Attachment Shield Adjust Throttle Lever Free Play AdjustmentsHandle Bar C242 Install the handlebar Installing a Trimmer Head With the gear case output shaft facingInstalling a Blade Both holders must be flat against the surface of the bladeStarting the Engine Mixing FuelFilling the Fuel Tank Examples of 501 mixing quantitiesWhen the Engine Starts Adjusting Engine IdleCutting attachment may rotate when the engine is started Idle Speed AdjustmentCutting Grass-Units equipped with a trimmer head Checking Unit ConditionShoulder Strap C242 Using a Blade C242 Operating Units with a BladeHour Maintenance General MaintenanceDaily Maintenance 10/15-Hour Maintenance Every 10 to 15 hours of operationWith an authorized Shindaiwa servicing DealerShindaiwa Tornado Blade Long Term StorageBlade Sharpening Multiple-tooth Circular BladeTroubleshooting Guide Engine does not StartAdditional Problems Manufacturers Warranty Coverage Limitations Japan 3167,-731 3070-692 2481-849-82-81 Fax2220-849-82-81 Telephone 6696-692 Hiroshima Ku,-AsaminamiContinuación Diagnostico Guia Adicionales ProblemasDiagnostico Guia 18SPMúltiples Dientes de Discos Discos de AfiladoPlazo Largo de Almacenamiento Tornado Shindaiwa DiscoDistri o servicio de centro su con consulte Mantenimiento horas 135 CadaShindaiwa autorizado buidor Carbón, de excesiva acumulación nota SiHoras 50 Cada Mantenimiento Horas 10/15 Cada MantenimientoGeneral Mantenimiento Horas 10 Cada MantenimientoDiario Mantenimiento Cuchilla una con Unidades Operando C242 Disco un UsandoUnidad la de Condición la Verifique Corte deCabezal con Equipadas Máquinas Césped de Corte Motor del Parada Motor delMínima Marcha de Ajuste Continuación Motor del ArranqueCombustible de Mezcla Motor del ArranqueCombustible de Tanque el Llenando De proporciónCuchilla la Instalando 9SPNylon de Cabezal del Instalación C242 Mango Continuación EnsamblajeAcelerador del holgura la Ajuste Ajustes Ensamblaje Allen cabezaEnsamblar de Antes C242 EspecificacionesProducto del Descripción Trabajo de Area del Alerta Esté Seguridad de EtiquetasPíes Equipado Debidamente Operario El Seguridad de Instrucciones Limpios mangos los mantenga SiempreHumana reproducción la Nocivos efectos otros u congénitos ContenidoIncendios de Riesgo El Disminuya Alerta MantengaseC242 Desmalezadora

81644 specifications

The Shindaiwa 81644 is a remarkable piece of equipment designed for professionals in landscaping and agriculture. Renowned for its durability and performance, this model is an essential tool for anyone in need of a reliable, high-efficiency solution for their yard care and maintenance projects.

One of the standout features of the Shindaiwa 81644 is its powerful engine. The unit is equipped with a robust 25.4 cc 2-stroke engine that delivers an impressive power-to-weight ratio, ensuring efficient operation without compromising on performance. This kind of engine is designed for easy starting and provides a reliable output that allows users to tackle even the most challenging tasks with ease.

Another key characteristic of the Shindaiwa 81644 is its lightweight design. Weighing in at approximately 7.9 lbs, this model is designed to reduce operator fatigue, allowing for extended use without added strain. The ergonomic handle further enhances comfort, enabling a natural grip and offering better control during operation.

Technologically, the Shindaiwa 81644 incorporates advanced anti-vibration technology. This feature minimizes vibrations during use, ensuring a smoother experience while reducing the risk of operator fatigue. Additionally, the unit includes an adjustable throttle, allowing users to optimize their cutting speed based on the specific job at hand.

The durability of the Shindaiwa 81644 is another highlight. Constructed with high-quality materials, this equipment is built to withstand the rigors of regular use in various weather conditions. Its fuel-efficient engine also represents Shindaiwa's commitment to sustainability, minimizing environmental impact while maximizing performance.

For convenience, the Shindaiwa 81644 is designed with an easy-to-access air filter and spark plug, simplifying maintenance. This ensures that operators can keep their equipment in top condition with minimal effort.

In summary, the Shindaiwa 81644 combines power, efficiency, and user-friendly features, making it one of the most sought-after options for professionals looking to enhance their landscaping tools. Whether for commercial or personal use, this model stands out as a reliable choice that meets the demands of any outdoor maintenance project.
Top Page Image Contents