Servis-Rhino 2407TL manual Assembly Instructions

Page 34
(SL-32)
(SL-11)
(SL-23)

ASSEMBLY

ASSEMBLY

Assembly Instructions

To avoid injury during installation of the loader attachment, do not allow bystanders within 10 feet of loader or attachment.

Always wear safety glasses when removing or installing buckets.

Always use a drift and hammer made of non-sparking material (a shot-filled mallet is recommended) to install or remove pins. A steel hammer or drift could generate flying metal fragments and result in injury. Always wear safety glasses when using a hammer to remove or install pins.

Always have a heavy attachment, such as a bucket mounted on loader when it is removed from tractor.

It is important not to put excessive weight on parking stands with lift cylinder retraction. Damage may result.

Never allow anyone to get under the loader or attachment or to reach through the loader lift arms when raised. Serious injury could result from crushing or pinching by the loader or attachment. (SL-06)

Make sure the loader is properly attached to the tractor and the retaining pins securely lock the loader into position. Improper mounting of the loader onto the tractor can result in the loader falling causing serious injury.

Only mount the loader on a tractor that is listed on the mounting instructions. Never mount on a tricycle steering front axle. Move the tractor front and rear wheels to the widest spacing and add the recommended rear tractor ballast to prevent tractor tip over. Keep the tractor tires properly inflated. Maintain at least 25% of the total Tractor and Loader weight including the maximum load in the bucket or attachment on the rear axle. Always wear your seatbelt and make sure the ROPS structure is fully deployed to prevent serious injury or death from the tractor tipping over.

Make sure all air is purged from the hydraulic system before using the loader. Air in the system can cause the loader to respond sluggishly or with unexpected movement. The air can be purged from the cylinder lines by fully cycling the cylinders several times from the fully closed to fully open position. Sudden or unexpected movement or dropping of the loader and attachment could result in serious injury.

2407TL 01/11

Assembly Section 3-2

© 2011 Alamo Group Inc.

Page 33 Page 35
Image 34
Page 33 Page 35
Contents 2407TL To the Owner/Operator/Dealer Table of Contents Maintenance Section Safety Section Safety General Safety Instructions and Practices2407TL 01/11 Safety Section Operator Safety Instructions and Practices Equipment Operation Safety Instructions and Practices SG-36 2407TL 01/11 Safety Section Safety SL-33 Safety Transporting Safety Instructions and Practices Safety Maintenance and Service Safety Instructions and Practices See Your Rhino Dealer Storage and Parking Safety Instructions and Practices Decal Location QTY Level Description Decal Description Loader Positions 2407TL 01/11 Safety Section Loader Safety Safety Federal Laws and Regulations Employer-Employee Operator RegulationsIntroduction Section Introduction Introduction Introduction Before Operating this Machine Page Assembly and Connecting the Loader Section Assembly Assembly InstructionsProper Ballasting and Wheel Spacing Dismounting Loader and Mounting Loader to Tractor Dismounting Loader2407TL 01/11 Assembly Section Mounting Loader Attaching Pin on Bucket Page Operation Section Operation Standard Equipment and Specifications Operator Requirements Operation Tractor Requirements Personal Protective Equipment PPETractor Lighting and SMV Emblem Rops and Seat BeltTractor Ballast Getting On and Off the Tractor Boarding the Tractor Dismounting the TractorStarting the Tractor Pre-Operation Inspection and Service Tractor Pre-Operation Inspection/Service Loader Pre-Operation Inspection and ServiceMount Assembly OPS-L-0007B Do not Operate an Unsafe Tractor or Front END Loader Front END Loader PRE-OPERATION Inspection Driving the Tractor and Loader Operating the Tractor and Loader Driving the Tractor and LoaderSG-36 Operation SL-33 Operation Operating the Loader Filling the BucketOperation Lifting the Load Carrying the LoadDumping the Bucket Lowering the Bucket Operating with Float Control Loading from a Bank Operation Peeling and Scraping Loading LOW Trucks or Spreaders from a Pile Backfilling Operation Handling Large Heavy Objects Operating Bale Spear Optional Attachment Transporting the Tractor and Implement Loader StorageShutting Down the Implement Operation Transporting on Public Roadways Operation Hauling the Tractor and Implement Troubleshooting Guide Trouble Possible Cause Possible RemedyProblem Possible Cause Remedy Page Maintenance Section Maintenance 2407TL 01/11 Maintenance Section Lubrication Schedule Daily Maintenance Adjusting Bucket Lever IndicatorCylinder Service Lift and Bucket Cylinder DisassemblyLift and Bucket Cylinder Reassembly Storage Maintenance Proper Torque for Fasteners Maintenance Maintenance Page Rhino To the OWNER/OPERATOR/DEALER 2407TL

2407TL specifications

The Servis-Rhino 2407TL is a robust and efficient tractor loader designed for agricultural and industrial applications. Known for its versatility, this machine is equipped with advanced features, making it a valuable asset for handling various tasks on the farm or job site.

One of the standout characteristics of the 2407TL is its powerful engine, which delivers exceptional performance while maintaining fuel efficiency. The engine is designed to provide high torque at low RPM, making it ideal for demanding tasks such as lifting heavy loads and digging. With a maximum lift capacity of 2,400 pounds, the 2407TL can easily handle a variety of attachments, including buckets, forks, and grapples.

Equipped with a hydrostatic transmission, the Servis-Rhino 2407TL offers smooth and precise control. This technology allows operators to adjust their speed seamlessly without having to shift gears, enhancing productivity and ease of use. Additionally, the transmission features a two-speed range, providing flexibility for both high-speed transport and low-speed operation, which is ideal for maneuvering in tight spaces.

The machine’s design emphasizes operator comfort and safety. The spacious cab is equipped with ergonomic controls that are easily accessible, reducing operator fatigue during long working hours. Large windows provide excellent visibility, allowing the operator to have a clear line of sight to the work area and enhancing overall safety. Furthermore, the cab is designed to minimize noise and vibration, creating a more pleasant working environment.

Another notable feature of the Servis-Rhino 2407TL is its four-wheel drive system, which offers enhanced traction and stability, especially in challenging terrains. This technology ensures that the loader performs optimally even on steep inclines or in muddy conditions, making it a reliable choice for various applications.

In summary, the Servis-Rhino 2407TL tractor loader combines power, efficiency, and comfort. With its strong engine, hydrostatic transmission, thoughtful design, and advanced traction capabilities, it stands out as an excellent tool for operators looking to enhance their productivity in agricultural and industrial settings. Whether it's loading, digging, or transporting materials, the 2407TL is engineered to meet the demands of modern operations.
Top Page Image Contents