Servis-Rhino 2407TL manual Daily Maintenance, Adjusting Bucket Lever Indicator

Page 89

MAINTENANCE

Daily Maintenance

Regular maintenance of your loader and hydraulic system will insure maximum loader efficiency and long life.

1.Check fluid level of tractor hydraulic system before starting each day’s operation. If necessary, add hydraulic oil as recommended in your tractor operator’s manual.

2.Daily, unless conditions justify more frequent greasing, lubricate all twelve grease fittings; one at each end of lift boom arms and one at rod and base ends of each lift and bucket cylinder.

3.After every ten hours of operation, check all hardware and tighten where required.

4.Replace hoses immediately if they are damaged by a cut or scrape, extruded at the fittings or leaking. Hydraulic oil leaks should be repaired promptly to avoid loss of oil and serious personal injury from escaping oil.

Escaping hydraulic fluid under pressure can penetrate skin, causing serious personal injury.

•DO NOT use your hand to check for leaks. Use a piece of wood or cardboard and wear eye protection to search for leaks.

•Stop engine and relieve pressure before connecting or disconnecting lines.

•Tighten all connections before starting engine or pressurizing lines.

NOTE: If any fluid is injected into skin, obtain medical attention immediately or gangrene may result.

Adjusting Bucket Lever Indicator

With various tractor tire options or attachments it may be necessary to adjust bucket level indicator tube up or down on bucket cylinder tube. Tractor must be on level surface with attachment flat on surface. Loosen tightener band and adjust level guide tube along bucket cylinder until end of guide tube is flush with end of rod. Tighten band.

2407TL 01/11

Maintenance Section 5-5

© 2011 Alamo Group Inc.

MAINTENANCE

Page 88 Page 90
Image 89
Page 88 Page 90
Contents 2407TL To the Owner/Operator/Dealer Table of Contents Maintenance Section Safety Section General Safety Instructions and Practices Safety2407TL 01/11 Safety Section Operator Safety Instructions and Practices Equipment Operation Safety Instructions and Practices SG-36 2407TL 01/11 Safety Section Safety SL-33 Safety Transporting Safety Instructions and Practices Safety Maintenance and Service Safety Instructions and Practices See Your Rhino Dealer Storage and Parking Safety Instructions and Practices Decal Location QTY Level Description Decal Description Loader Positions 2407TL 01/11 Safety Section Loader Safety Safety Employer-Employee Operator Regulations Federal Laws and RegulationsIntroduction Section Introduction Introduction Introduction Before Operating this Machine Page Assembly and Connecting the Loader Section Assembly Instructions AssemblyProper Ballasting and Wheel Spacing Dismounting Loader Dismounting Loader and Mounting Loader to Tractor2407TL 01/11 Assembly Section Mounting Loader Attaching Pin on Bucket Page Operation Section Operation Standard Equipment and Specifications Operator Requirements Operation Personal Protective Equipment PPE Tractor RequirementsTractor Ballast Rops and Seat BeltTractor Lighting and SMV Emblem Getting On and Off the Tractor Dismounting the Tractor Boarding the TractorStarting the Tractor Pre-Operation Inspection and Service Loader Pre-Operation Inspection and Service Tractor Pre-Operation Inspection/ServiceMount Assembly OPS-L-0007B Do not Operate an Unsafe Tractor or Front END Loader Front END Loader PRE-OPERATION Inspection Driving the Tractor and Loader Driving the Tractor and Loader Operating the Tractor and LoaderSG-36 Operation SL-33 Operation Filling the Bucket Operating the LoaderOperation Carrying the Load Lifting the LoadDumping the Bucket Lowering the Bucket Operating with Float Control Loading from a Bank Operation Peeling and Scraping Loading LOW Trucks or Spreaders from a Pile Backfilling Operation Handling Large Heavy Objects Operating Bale Spear Optional Attachment Shutting Down the Implement Loader StorageTransporting the Tractor and Implement Operation Transporting on Public Roadways Operation Hauling the Tractor and Implement Trouble Possible Cause Possible Remedy Troubleshooting GuideProblem Possible Cause Remedy Page Maintenance Section Maintenance 2407TL 01/11 Maintenance Section Lubrication Schedule Adjusting Bucket Lever Indicator Daily MaintenanceLift and Bucket Cylinder Disassembly Cylinder ServiceLift and Bucket Cylinder Reassembly Storage Maintenance Proper Torque for Fasteners Maintenance Maintenance Page Rhino To the OWNER/OPERATOR/DEALER 2407TL

2407TL specifications

The Servis-Rhino 2407TL is a robust and efficient tractor loader designed for agricultural and industrial applications. Known for its versatility, this machine is equipped with advanced features, making it a valuable asset for handling various tasks on the farm or job site.

One of the standout characteristics of the 2407TL is its powerful engine, which delivers exceptional performance while maintaining fuel efficiency. The engine is designed to provide high torque at low RPM, making it ideal for demanding tasks such as lifting heavy loads and digging. With a maximum lift capacity of 2,400 pounds, the 2407TL can easily handle a variety of attachments, including buckets, forks, and grapples.

Equipped with a hydrostatic transmission, the Servis-Rhino 2407TL offers smooth and precise control. This technology allows operators to adjust their speed seamlessly without having to shift gears, enhancing productivity and ease of use. Additionally, the transmission features a two-speed range, providing flexibility for both high-speed transport and low-speed operation, which is ideal for maneuvering in tight spaces.

The machine’s design emphasizes operator comfort and safety. The spacious cab is equipped with ergonomic controls that are easily accessible, reducing operator fatigue during long working hours. Large windows provide excellent visibility, allowing the operator to have a clear line of sight to the work area and enhancing overall safety. Furthermore, the cab is designed to minimize noise and vibration, creating a more pleasant working environment.

Another notable feature of the Servis-Rhino 2407TL is its four-wheel drive system, which offers enhanced traction and stability, especially in challenging terrains. This technology ensures that the loader performs optimally even on steep inclines or in muddy conditions, making it a reliable choice for various applications.

In summary, the Servis-Rhino 2407TL tractor loader combines power, efficiency, and comfort. With its strong engine, hydrostatic transmission, thoughtful design, and advanced traction capabilities, it stands out as an excellent tool for operators looking to enhance their productivity in agricultural and industrial settings. Whether it's loading, digging, or transporting materials, the 2407TL is engineered to meet the demands of modern operations.
Top Page Image Contents