Servis-Rhino 2407TL manual Cylinder Service, Lift and Bucket Cylinder Disassembly

Page 90

MAINTENANCE

Cylinder Service

Loader cylinders are designed to be reliable and easy to service. If a cylinder should malfunction during warranty period, return complete cylinder assembly, without disassembling, to your authorized service department or contact your authorized service department for instructions. Unauthorized disassembly of a cylinder in warranty period will VOID WARRANTY.

MAINTENANCE

Lift and Bucket Cylinder Disassembly

Following is an outline procedure for disassembling and reassembling cylinders

1.Hold cylinder tube (13) stationary and pull wire ring (14) out through slot.

2.Pull shaft (1), with all assembled parts, out of cylinder tube (13).

Note: Resistance will be felt until piston seal (8) slides over wire retaining ring groove.

3.Remove elastic locknut (12) from end of shaft and slide cylinder piston (10) and cylinder head (4) off shaft.

4.Remove piston wear ring (11), piston seal (8), and o-ring (7) from outside grooves on piston(10).

5.Remove wiper seal (2), rod seal (3) and wear ring (5) from inside of cylinder head and o-ring (7) with backup washer (6) from groove on outside of head.

6.Clean all parts including cylinder tube, in a suitable cleaning solvent, then use air pressure to blow any dirt or excess solvent from all parts.

7.Examine all parts for wear or damage and replace, if necessary.

2407TL 01/11

Maintenance Section 5-6

© 2011 Alamo Group Inc.

Image 90
Contents 2407TL To the Owner/Operator/Dealer Table of Contents Maintenance Section Safety Section Safety General Safety Instructions and Practices2407TL 01/11 Safety Section Operator Safety Instructions and Practices Equipment Operation Safety Instructions and Practices SG-36 2407TL 01/11 Safety Section Safety SL-33 Safety Transporting Safety Instructions and Practices Safety Maintenance and Service Safety Instructions and Practices See Your Rhino Dealer Storage and Parking Safety Instructions and Practices Decal Location QTY Level Description Decal Description Loader Positions 2407TL 01/11 Safety Section Loader Safety Safety Federal Laws and Regulations Employer-Employee Operator RegulationsIntroduction Section Introduction Introduction Introduction Before Operating this Machine Page Assembly and Connecting the Loader Section Assembly Assembly InstructionsProper Ballasting and Wheel Spacing Dismounting Loader and Mounting Loader to Tractor Dismounting Loader2407TL 01/11 Assembly Section Mounting Loader Attaching Pin on Bucket Page Operation Section Operation Standard Equipment and Specifications Operator Requirements Operation Tractor Requirements Personal Protective Equipment PPERops and Seat Belt Tractor Lighting and SMV EmblemTractor Ballast Getting On and Off the Tractor Boarding the Tractor Dismounting the TractorStarting the Tractor Pre-Operation Inspection and Service Tractor Pre-Operation Inspection/Service Loader Pre-Operation Inspection and ServiceMount Assembly OPS-L-0007B Do not Operate an Unsafe Tractor or Front END Loader Front END Loader PRE-OPERATION Inspection Driving the Tractor and Loader Operating the Tractor and Loader Driving the Tractor and LoaderSG-36 Operation SL-33 Operation Operating the Loader Filling the BucketOperation Lifting the Load Carrying the LoadDumping the Bucket Lowering the Bucket Operating with Float Control Loading from a Bank Operation Peeling and Scraping Loading LOW Trucks or Spreaders from a Pile Backfilling Operation Handling Large Heavy Objects Operating Bale Spear Optional Attachment Loader Storage Transporting the Tractor and ImplementShutting Down the Implement Operation Transporting on Public Roadways Operation Hauling the Tractor and Implement Troubleshooting Guide Trouble Possible Cause Possible RemedyProblem Possible Cause Remedy Page Maintenance Section Maintenance 2407TL 01/11 Maintenance Section Lubrication Schedule Daily Maintenance Adjusting Bucket Lever IndicatorCylinder Service Lift and Bucket Cylinder DisassemblyLift and Bucket Cylinder Reassembly Storage Maintenance Proper Torque for Fasteners Maintenance Maintenance Page Rhino To the OWNER/OPERATOR/DEALER 2407TL

2407TL specifications

The Servis-Rhino 2407TL is a robust and efficient tractor loader designed for agricultural and industrial applications. Known for its versatility, this machine is equipped with advanced features, making it a valuable asset for handling various tasks on the farm or job site.

One of the standout characteristics of the 2407TL is its powerful engine, which delivers exceptional performance while maintaining fuel efficiency. The engine is designed to provide high torque at low RPM, making it ideal for demanding tasks such as lifting heavy loads and digging. With a maximum lift capacity of 2,400 pounds, the 2407TL can easily handle a variety of attachments, including buckets, forks, and grapples.

Equipped with a hydrostatic transmission, the Servis-Rhino 2407TL offers smooth and precise control. This technology allows operators to adjust their speed seamlessly without having to shift gears, enhancing productivity and ease of use. Additionally, the transmission features a two-speed range, providing flexibility for both high-speed transport and low-speed operation, which is ideal for maneuvering in tight spaces.

The machine’s design emphasizes operator comfort and safety. The spacious cab is equipped with ergonomic controls that are easily accessible, reducing operator fatigue during long working hours. Large windows provide excellent visibility, allowing the operator to have a clear line of sight to the work area and enhancing overall safety. Furthermore, the cab is designed to minimize noise and vibration, creating a more pleasant working environment.

Another notable feature of the Servis-Rhino 2407TL is its four-wheel drive system, which offers enhanced traction and stability, especially in challenging terrains. This technology ensures that the loader performs optimally even on steep inclines or in muddy conditions, making it a reliable choice for various applications.

In summary, the Servis-Rhino 2407TL tractor loader combines power, efficiency, and comfort. With its strong engine, hydrostatic transmission, thoughtful design, and advanced traction capabilities, it stands out as an excellent tool for operators looking to enhance their productivity in agricultural and industrial settings. Whether it's loading, digging, or transporting materials, the 2407TL is engineered to meet the demands of modern operations.