Shutting down and clean-up

WASHER

OPERATOR’S MANUAL PRESSURE

STEP 1: If using an op- tional detergent injector, place the detergent line in a bucket of water allowing detergent to be flushed from system.

Burner

Switch

STEP 2: Turn burner switch off and continue spraying water, allowing the water to cool. After water has cooled to less than 100°F, turn the at- tached pressure washer off.

STEP 3: Turn garden hose water off. Open the spray gun to relieve remaining pressure.

STORAGE

CAUTION: Always store your pressure washer in a location where the temperature will not fall below 32°F (0°C).The pump in this machine is susceptible to permanent damage if frozen. FREEZE DAMAGE IS NOT COVERED BY WARRANTY.

1.Stop the pressure washer, squeeze spray gun trigger to release pressure.

2.Detach water supply hose and high pressure hose.

3.Turn on the machine for a few seconds, until re- maining water exits. Turn engine off immediately.

4.Drain the gas and oil from the engine.

5.Do not allow high pressure hose to become kinked.

6.Store the machine and accessories in a room which does not reach freezing temperatures.

CAUTION: Failure to follow the above directions will result in damage to your pressure washer.

When the pressure washer is not being operated or is being stored for more than one month, follow these instructions:

1.Replenish engine oil to upper level.

2.Drain gasoline from fuel tank, fuel line, fuel valve and carburetor.

3.Pour about one teaspoon of engine oil through the spark plug hole, pull the starter grip several times and replace the plug. Then pull the starter grip slowly

until you feel increased pressure which indicates the piston is on its compression stroke and leave it in that position. This closes both the intake and exhaust valves to prevent rusting of cylinder.

4.Cover the pressure washer and store in a clean, dry place that is well ventilated away from open flame or sparks. NOTE: The use of a fuel additive, such as STA-BIL®, or an equivalent, will minimize the formulation of fuel deposits during storage. Such additives may be added to the gasoline in the fuel tank of the engine, or to the gasoline in a storage container.

After Extended Storage

CAUTION: Prior to restarting, thaw out any possible ice from pressure washer hoses, spray gun or wand.

Engine Maintenance

During the winter months, rare atmospheric conditions may develop which will cause an icing condition in the carburetor. If this develops, the engine may run rough, lose power and may stall.This temporary condition can be overcome by deflecting some of the hot air from the engine over the carburetor area. NOTE: Refer to the engine manufacturer’s manual for service and mainte- nance of the engine.

97-6133 • Rev. 5/07

HP-5030D specifications

The Shark HP-5030D is a powerful and innovative home cleaning tool designed to simplify the process of cleaning while delivering impressive performance. This versatile vacuum is equipped with advanced technology and features that cater to a variety of cleaning needs, making it a favorite among homeowners.

One of the standout features of the Shark HP-5030D is its lightweight and compact design. Weighing in at just a few pounds, this vacuum is easy to maneuver and carry, allowing users to clean without the usual strain associated with heavier models. Its compact size makes it ideal for storage in small spaces, ensuring it can be easily tucked away when not in use.

The Shark HP-5030D is powered by a robust and efficient motor that provides strong suction power, making it effective for both carpet and hard flooring. This vacuum is equipped with a brush roll that is specifically designed to lift dirt and debris from various surfaces, offering a deep clean that is hard to match. The advanced motor technology also ensures quiet operation, allowing users to clean at any hour without disturbing others.

Notably, the Shark HP-5030D features a HEPA filtration system that captures 99.9% of dust and allergens, making it an excellent choice for households with allergies or respiratory concerns. This filtration system is complemented by a washable and reusable filter, reducing the cost of maintenance while promoting sustainability.

Another impressive characteristic is the vacuum’s versatility; it comes with several attachments that cater to different cleaning tasks. The included crevice tool is perfect for tight spaces, while the upholstery tool efficiently cleans furniture and drapes. The vacuum also features a dusting brush, making it capable of tackling delicate surfaces without causing damage.

Moreover, the Shark HP-5030D is designed for ease of use. It features a large capacity dust bin that can easily be emptied with the touch of a button, minimizing mess and making the disposal of dirt and debris simpler than ever. The vacuum also has a convenient one-click transformation into a handheld mode, making it straightforward to reach high or low areas.

In summary, the Shark HP-5030D stands out in the market for its lightweight design, powerful suction, HEPA filtration, and versatile attachments. It combines functionality with ease of use, making it a valuable addition to any cleaning arsenal. Whether it's for everyday cleaning or tackling specific messes, this vacuum is designed to meet the demands of modern households with efficiency and style.