Seagate ST3146707LW/LC, ST3300007LW/LC, ST373207LW/LC Standard features, Media characteristics

Page 18

Cheetah 10K.7 SCSI drives use a dedicated landing zone at the innermost radius of the media to eliminate the possibility of destroying or degrading data by landing in the data zone. The drive automatically goes to the landing zone when power is removed.

An automatic shipping lock prevents potential damage to the heads and discs that results from movement dur- ing shipping and handling. The shipping lock automatically disengages when power is applied to the drive and the head load process begins.

Ahigh-performance actuator assembly with a low-inertia, balanced, patented, straight-arm design provides excellent performance with minimal power dissipation.

3.1Standard features

The Cheetah 10K.7 SCSI family has the following standard features:

•Integrated Ultra320 SCSI controller

•Multimode SCSI drivers and receivers—single-ended (SE) and low voltage differential (LVD)

•16 bit I/O data bus

•Asynchronous and synchronous data transfer protocol

•Firmware downloadable via SCSI interface

•User-selectable logical block size (512 to bytes per logical block) in any multiple of four bytes

•Programmable sector reallocation scheme

•Flawed sector reallocation at format time

•Programmable auto write and read reallocation

•Reallocation of defects on command (post format)

•ECC maximum burst correction length of (320) bits

•Sealed head and disc assembly

•No preventative maintenance or adjustment required

•Dedicated head landing zone

•Embedded servo design

•Self diagnostics performed when power is applied to the drive

•Zoned bit recording (ZBR)

•Vertical, horizontal, or top down mounting

•Dynamic spindle brake

•8,192 kbytes data buffer

•Hot plug compatibility (Section 9.6.4.2 lists proper host connector needed) for LC model drives

•Drive Self Test (DST)

•BackGround Media Scan (BGMS)

•Data Integrity Check

•Power Save

•Supports SCSI bus fairness

3.2Media characteristics

The media used on the drive has an aluminum substrate coated with a thin film magnetic material, overcoated with a proprietary protective layer for improved durability and environmental protection.

8

Cheetah 10K.7 SCSI Product Manual, Rev. D

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Cheetah 10K.7 Scsi Page Cheetah 10K.7 Scsi Page Revision status summary sheet Page Contents Seagate Technology support services Defect and error managementInstallation Interface requirementsList of Figures Viii Cheetah 10K.7 Scsi Product Manual, Rev. D Scope Cheetah 10K.7 Scsi family drive ST3300007LC shownCheetah 10K.7 Scsi Product Manual, Rev. D Electromagnetic compatibility Applicable standards and reference documentationStandards Electromagnetic susceptibilityElectromagnetic compliance European Union Restriction of Hazardous Substances RoHSReference documents Cheetah 10K.7 Scsi Product Manual, Rev. D General description Standard features Media characteristicsPerformance ReliabilityFormatted capacities Accessories user installed Factory installed accessoriesOptions factory installed Programmable drive capacityPerformance characteristics Internal drive characteristics transparent to userScsi performance characteristics visible to user Generalized performance characteristics Access timeFormat command execution time minutes Ultra320 ScsiStart/stop time Prefetch/multi-segmented cache controlCache operation Caching write data Prefetch operation Cheetah 10K.7 Scsi Product Manual, Rev. D Recoverable Errors Reliability specificationsError rates Unrecoverable ErrorsPreventive maintenance Reliability and serviceSeek errors Annualized Failure Rate AFR4 S.M.A.R.T Controlling S.M.A.R.TDetermining rate Performance impactReporting control Predictive failuresParameter Code Description Drive Self Test DSTImplementation State of the drive prior to testingDST Failure Definition Invoking DSTExtended test Function Code 010b Product warrantyShort test Function Code 001b Log page entriesShipping Product repair and return informationPhysical/electrical specifications AC power requirementsDC power requirements ST3146707 SE mode LVD mode Power sequencing Conducted noise immunity3 12 V Current profile Typical ST3300007 drive +12 V current profile Typical ST3146707 drive +12 V current profile Typical ST373207 drive +12 V current profile Power dissipation ST3300007ST3146707 ST373207 Relative humidity TemperatureEnvironmental limits Effective altitude sea levelShock and vibration ShockRecommended mounting Air cleanliness VibrationCorrosive environment Mechanical specifications AcousticsLW mounting configuration dimensions LC mounting configuration dimensions Defect and error management Drive error recovery proceduresDrive internal defects Page Scsi systems errors Background Media Scan Media Pre-ScanDrive ID/option select header InstallationConfigure drive options FormattingJ6 jumper header J5 jumper header on LW models only J2 option select header on LW models only Function description RESDrive orientation CoolingDrive mounting GroundingCheetah 10K.7 Scsi Product Manual, Rev. D Interface requirements General descriptionScsi interface messages supported Scsi interface commands supported Page Page Page Inquiry Vital Product data Mode Sense data Mode Sense 10 Byte Header Data 00 ae 00 10 00 00 00 08 11 17 73 30 00 00 02 00 ae 00 10 00 00 00 08 08 8b b9 98 00 00 02 Scsi bus conditions and miscellaneous features supported Condition/feature supported bySynchronous data transfer periods supported Synchronous data transferPhysical interface 2 REQ/ACK offsetDC cable and connector PCB Scsi interface physical description Cable requirements Mating connectorsScsi interface cable requirements LC ModelsMating connectors for LW model drives Mating connectors for LC model drivesRight-angle to Pcba connectors Scsi daisy chain interface cabling for LW drives Nonshielded 68-pin Scsi device connector used on LW drives Nonshielded 80-pin Scsi SCA-2 connector, used on LC drives GND +DBP1 Charge Active LED OUT 4 REQ +REQ Active LED OUT 4 LVD output characteristics Electrical descriptionMultimode-SE and LVD alternatives LVD input characteristics General cable characteristicsSingle-ended drivers/receivers Cables for low voltage differential drivers/receivers Terminator requirements Terminator power LW drivesLC drives Disc drive Scsi timing Disc drive Scsi timing Spindle status Command status LED status Drive activity LEDPresales Support Seagate Technology support servicesInternet MySeagate Reseller.seagate.com Technical SupportWarranty Service Data Recovery Services Authorized Service CentersData Recovery Services FAX services-All Europe toll call Call center Presales and Technical Support Warranty ServiceToll-free support numbers Asia/Pacific support services Publication feedback survey Cheetah 10K.7 Scsi Product Manual, Rev. D Symbols NumericsPage Page PCB Page Cheetah 10K.7 Scsi Product Manual, Rev. D

ST3300007LW/LC, ST373207LW/LC, ST3146707LW/LC specifications

Seagate's ST3146707LW/LC, ST373207LW/LC, and ST3300007LW/LC are part of the company's renowned line of hard disk drives (HDDs), specifically designed for enterprise and high-performance computing environments. With their reliability and performance, these drives have become popular choices for data centers and critical applications requiring extensive storage capabilities.

One of the standout features of these models is their capacity to handle large volumes of data. The ST3146707LW/LC has a capacity of 146GB, while the ST373207LW/LC offers 73GB, and the ST3300007LW/LC comes with a substantial 300GB. These capacities make them well-suited for applications that require not only high storage space but also rapid access to data.

In terms of performance, these drives utilize a 10,000 RPM spindle speed, which significantly enhances data access times and overall performance. The combination of fast rotational speeds with Seagate's advanced caching algorithms allows for swift data retrieval, making these drives ideal for environments where speed is crucial.

These HDDs also employ the SCSI (Small Computer System Interface) interface, which promises high data transfer rates and reliability in enterprise-level applications. The Ultra320 SCSI interface can support transfer rates up to 320 MB/s, ensuring that the drives can efficiently communicate with other system components.

Another key technology featured in these models is Seagate's Adaptive Error Correction technology, which enhances data integrity and reliability. This feature helps in the detection and correction of errors that can occur during data transfer, reducing the risk of data loss.

Performance consistency is critical in enterprise environments, and these drives are built to endure the demands of 24/7 operation. They are designed with robust mechanisms to withstand temperature fluctuations, shock, and vibrations commonly found in data center settings.

In summary, the Seagate ST3146707LW/LC, ST373207LW/LC, and ST3300007LW/LC hard drives exemplify advanced features and technologies tailored for enterprise storage solutions. With significant capacities, impressive spindle speeds, SCSI connectivity, and reliability-focused technologies, these drives remain a valuable asset for businesses relying on stable and high-performance data storage.
Top Page Image Contents