Seagate ST373207LW/LC, ST3146707LW/LC Factory installed accessories, Options factory installed

Page 20

3.5.1Programmable drive capacity

Using the Mode Select command, the drive can change its capacity to something less than maximum. See the Mode Select Parameter List table in the SCSI Interface Product Manual. Refer to the Parameter list block descriptor number of blocks field. A value of zero in the number of blocks field indicates that the drive shall not change the capacity it is currently formatted to have. A number in the number of blocks field that is less than the maximum number of LBAs changes the total drive capacity to the value in the block descriptor number of blocks field. A value greater than the maximum number of LBAs is rounded down to the maximum capacity.

3.6Factory installed accessories

OEM Standard drives are shipped with the Cheetah 10K.7 SCSI Installation Guide, part number 100260917, and the Safety and Regulatory Agency Specifications, part number 75789512 (unless otherwise specified). The factory also ships with the drive a small bag of jumper plugs used for the J2, J5, and J6 option select jumper headers on LW models only.

3.7Options (factory installed)

All customer requested options are incorporated during production or packaged at the manufacturing facility before shipping. Some of the options available are (not an exhaustive list of possible options):

•Other capacities can be ordered depending on sparing scheme and sector size requested.

•Single unit shipping pack. The drive is normally shipped in bulk packaging to provide maximum protection against transit damage. Units shipped individually require additional protection as provided by the single unit shipping pack. Users planning single unit distribution should specify this option.

•The Cheetah 10K.7 SCSI Installation Guide, part number 100260917, is usually included with each standard OEM drive shipped, but extra copies may be ordered.

•The Safety and Regulatory Agency Specifications, part number 75789512, is usually included with each standard OEM drive shipped, but extra copies may be ordered.

3.8Accessories (user installed)

The following accessories are available. All accessories may be installed in the field.

• Single unit shipping pack.

10

Cheetah 10K.7 SCSI Product Manual, Rev. D

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Cheetah 10K.7 Scsi Page Cheetah 10K.7 Scsi Page Revision status summary sheet Page Contents Defect and error management InstallationSeagate Technology support services Interface requirementsList of Figures Viii Cheetah 10K.7 Scsi Product Manual, Rev. D Scope Cheetah 10K.7 Scsi family drive ST3300007LC shownCheetah 10K.7 Scsi Product Manual, Rev. D Applicable standards and reference documentation StandardsElectromagnetic compatibility Electromagnetic susceptibilityElectromagnetic compliance European Union Restriction of Hazardous Substances RoHSReference documents Cheetah 10K.7 Scsi Product Manual, Rev. D General description Standard features Media characteristicsFormatted capacities PerformanceReliability Factory installed accessories Options factory installedAccessories user installed Programmable drive capacityScsi performance characteristics visible to user Performance characteristicsInternal drive characteristics transparent to user Access time Format command execution time minutesGeneralized performance characteristics Ultra320 ScsiCache operation Start/stop timePrefetch/multi-segmented cache control Caching write data Prefetch operation Cheetah 10K.7 Scsi Product Manual, Rev. D Reliability specifications Error ratesRecoverable Errors Unrecoverable ErrorsReliability and service Seek errorsPreventive maintenance Annualized Failure Rate AFR4 S.M.A.R.T Controlling S.M.A.R.TPerformance impact Reporting controlDetermining rate Predictive failuresParameter Code Description Drive Self Test DSTState of the drive prior to testing DST Failure DefinitionImplementation Invoking DSTProduct warranty Short test Function Code 001bExtended test Function Code 010b Log page entriesShipping Product repair and return informationDC power requirements Physical/electrical specificationsAC power requirements ST3146707 SE mode LVD mode 3 12 V Current profile Power sequencingConducted noise immunity Typical ST3300007 drive +12 V current profile Typical ST3146707 drive +12 V current profile Typical ST373207 drive +12 V current profile Power dissipation ST3300007ST3146707 ST373207 Temperature Environmental limitsRelative humidity Effective altitude sea levelShock and vibration ShockRecommended mounting Corrosive environment Air cleanlinessVibration Mechanical specifications AcousticsLW mounting configuration dimensions LC mounting configuration dimensions Drive internal defects Defect and error managementDrive error recovery procedures Page Scsi systems errors Background Media Scan Media Pre-ScanInstallation Configure drive optionsDrive ID/option select header FormattingJ6 jumper header J5 jumper header on LW models only J2 option select header on LW models only Function description RESDrive orientation CoolingDrive mounting GroundingCheetah 10K.7 Scsi Product Manual, Rev. D Scsi interface messages supported Interface requirementsGeneral description Scsi interface commands supported Page Page Page Inquiry Vital Product data Mode Sense data Mode Sense 10 Byte Header Data 00 ae 00 10 00 00 00 08 11 17 73 30 00 00 02 00 ae 00 10 00 00 00 08 08 8b b9 98 00 00 02 Scsi bus conditions and miscellaneous features supported Condition/feature supported bySynchronous data transfer Physical interfaceSynchronous data transfer periods supported 2 REQ/ACK offsetDC cable and connector PCB Scsi interface physical description Mating connectors Scsi interface cable requirementsCable requirements LC ModelsMating connectors for LW model drives Mating connectors for LC model drivesRight-angle to Pcba connectors Scsi daisy chain interface cabling for LW drives Nonshielded 68-pin Scsi device connector used on LW drives Nonshielded 80-pin Scsi SCA-2 connector, used on LC drives GND +DBP1 Charge Active LED OUT 4 REQ +REQ Active LED OUT 4 Multimode-SE and LVD alternatives LVD output characteristicsElectrical description Single-ended drivers/receivers LVD input characteristicsGeneral cable characteristics Cables for low voltage differential drivers/receivers LC drives Terminator requirements Terminator powerLW drives Disc drive Scsi timing Disc drive Scsi timing Spindle status Command status LED status Drive activity LEDSeagate Technology support services Internet MySeagate Reseller.seagate.comPresales Support Technical SupportData Recovery Services Warranty ServiceData Recovery Services Authorized Service Centers Toll-free support numbers FAX services-All Europe toll callCall center Presales and Technical Support Warranty Service Asia/Pacific support services Publication feedback survey Cheetah 10K.7 Scsi Product Manual, Rev. D Symbols NumericsPage Page PCB Page Cheetah 10K.7 Scsi Product Manual, Rev. D

ST3300007LW/LC, ST373207LW/LC, ST3146707LW/LC specifications

Seagate's ST3146707LW/LC, ST373207LW/LC, and ST3300007LW/LC are part of the company's renowned line of hard disk drives (HDDs), specifically designed for enterprise and high-performance computing environments. With their reliability and performance, these drives have become popular choices for data centers and critical applications requiring extensive storage capabilities.

One of the standout features of these models is their capacity to handle large volumes of data. The ST3146707LW/LC has a capacity of 146GB, while the ST373207LW/LC offers 73GB, and the ST3300007LW/LC comes with a substantial 300GB. These capacities make them well-suited for applications that require not only high storage space but also rapid access to data.

In terms of performance, these drives utilize a 10,000 RPM spindle speed, which significantly enhances data access times and overall performance. The combination of fast rotational speeds with Seagate's advanced caching algorithms allows for swift data retrieval, making these drives ideal for environments where speed is crucial.

These HDDs also employ the SCSI (Small Computer System Interface) interface, which promises high data transfer rates and reliability in enterprise-level applications. The Ultra320 SCSI interface can support transfer rates up to 320 MB/s, ensuring that the drives can efficiently communicate with other system components.

Another key technology featured in these models is Seagate's Adaptive Error Correction technology, which enhances data integrity and reliability. This feature helps in the detection and correction of errors that can occur during data transfer, reducing the risk of data loss.

Performance consistency is critical in enterprise environments, and these drives are built to endure the demands of 24/7 operation. They are designed with robust mechanisms to withstand temperature fluctuations, shock, and vibrations commonly found in data center settings.

In summary, the Seagate ST3146707LW/LC, ST373207LW/LC, and ST3300007LW/LC hard drives exemplify advanced features and technologies tailored for enterprise storage solutions. With significant capacities, impressive spindle speeds, SCSI connectivity, and reliability-focused technologies, these drives remain a valuable asset for businesses relying on stable and high-performance data storage.
Top Page Image Contents