Scotts SP6213, SP6211 manual Remove Mower from Storage

Page 32

STORING MACHINE

M87116a

3.Loosen knob (B) 25 mm (1 in.) on each side. Allow upper handle (C) to pivot down.

M88835

4. Remove knob (D) and carriage bolt (E) from each side.

M96553

5.CAREFULLY fold lower handle (F) forward. Guide cables inside lower handle. DO NOT CRIMP CABLES.

6.Install bolts and knobs in lower handle.

Remove Mower from Storage

1.Unfold handles. Tighten knobs. Do not crimp cables.

2.Check engine oil level.

3.Connect wire to spark plug.

4.Inspect shields, safety devices and hardware.

Storing Machine - 28

Image 32

Contents OPERATOR’S Manual Using Your Operator’s Manual IntroductionThank You for Purchasing a Scotts Product California Proposition 65 WarningProduct Identification Record Identification NumbersTable of Contents Machine Safety Labels SafetySafety-Alert Symbol Certification Label Operate SafelyHelp Prevent Serious or Fatal Accidents Practice Safe MaintenanceProtect Children Before you unplug or adjust machine Avoid Injury from Contacting BladeHandling Waste Products Handling Fuel SafelyOperating Engine Controls Handle and Cutting Height ControlsHandle Controls Stop EngineAdjusting Handle Height Key Cutting Height Adjustments In mm InchesUpper Handle Lower HandleKeep hands, feet and clothing away from the blade Starting EngineRUNNING, Blade is Turning Stopping Engine Forward TravelTravel Speeds Mowing Tips Using Side Discharge ChuteUsing Grass Bag To Avoid Scalping Bagging and CompostingBagging Tips Mulching TipsAfter Mowing Replacement Parts Service LiteratureJohn Deere Quality Part NumberService Intervals Service Engine Warranty Maintenance Statement Engine OilAdjusting Carburetor Avoid FumesChanging Engine Oil To Change Engine OIL from the TOPCleaning and Replacing Air Cleaner Element To Change Engine OIL from the BottomStop engine. Let it cool Cleaning and Gapping Spark PlugCleaning Engine Cooling Fins Cleaning Drive Belt and Transmission Area Checking and Replacing Drive BeltTo Replace Drive Belt Picture Note View is from underside of differentialTransmission Cable Adjustment-SP6213 Lubricate Drive Shaft Hub Bushings Lubricate Mower AxlesCheck Blade Sharpening BladeCheck Blade To Remove BladeBalance and Install Blade Filling Fuel TankCleaning Fuel Cap Vent Check TroubleshootingUsing Troubleshooting Chart Troubleshooting Storing Safety Storing MachinePreparing Machine for Storage Preparing Fuel and Engine For StorageRemove Mower from Storage Assembly Install Starter RopeLawnmower Assembly Side Discharge Chute Bagger Bagger Chute Identify Parts SP6211 and SP6213Install Grass Bag Add Engine OilInsert bagging chute tab E into rear mower shield slot F Test Mower Specifications Machine SpecificationsEngine Travel Speed RangeDimensions Recommended LubricantsWarranty Limited Warranty for NEW Scotts Brand ProductsTire Warranty Limited Engine WarrantyWarranted Parts Cleaning Belt and Transmission Area IndexQuality Statement Step Refer to your operator’s manualStep Contact your dealer Step Call the Customer Communications CenterService Record Record Service Dates