Scotts SP6213, SP6211 manual Add Engine Oil, Install Grass Bag

Page 34

ASSEMBLY
	B
B
A
M88828	M61459

Pull and install starter rope (A) onto rope guide (B) mounted on the right side of the handle.

Add Engine Oil

IMPORTANT: Avoid damage! ENGINE IS SHIPPED WITHOUT OIL.

You MUST add oil before running the engine. See Service section for correct oil application.

1. Park mower on a level surface.

A

MX1567

2.Turn oil dipstick (A) 1/4 turn to the left. Remove dipstick.

3.Add 0.47 L (16 oz) oil through dipstick filler tube.

4.Check oil level:

•Install dipstick. Turn dipstick 1/4 turn right to tighten.

•Remove dipstick.

• Check oil level. Oil should be to the FULL mark (B). If not, add oil.

5.Install and tighten dipstick.

6.Remove "NO OIL" tag from top of engine.

Install Grass Bag

CAUTION: Avoid injury! DO NOT operate mower unless mulch guard, side discharge chute or grass bag and bagging chute are in place.

Bagging chute MUST be removed and mulch guard secured in place when grass bag is not being used.

A

B

MX1566

1.Remove mulch guard knob (A).

2.Lift and hold spring loaded mulch guard (B) up.

3.Install bagging chute:

Assembly - 30

Image 34

Contents OPERATOR’S Manual Thank You for Purchasing a Scotts Product Using Your Operator’s ManualIntroduction California Proposition 65 WarningProduct Identification Record Identification NumbersTable of Contents Safety-Alert Symbol SafetyMachine Safety Labels Certification Label Operate SafelyProtect Children Practice Safe MaintenanceHelp Prevent Serious or Fatal Accidents Handling Waste Products Before you unplug or adjust machineAvoid Injury from Contacting Blade Handling Fuel SafelyHandle Controls OperatingEngine Controls Handle and Cutting Height Controls Stop EngineUpper Handle Adjusting Handle HeightKey Cutting Height Adjustments In mm Inches Lower HandleRUNNING, Blade is Turning Starting EngineKeep hands, feet and clothing away from the blade Travel Speeds Forward TravelStopping Engine Using Grass Bag Using Side Discharge ChuteMowing Tips Bagging Tips To Avoid ScalpingBagging and Composting Mulching TipsAfter Mowing John Deere Quality Replacement PartsService Literature Part NumberService Intervals Adjusting Carburetor ServiceEngine Warranty Maintenance Statement Engine Oil Avoid FumesChanging Engine Oil To Change Engine OIL from the TOPCleaning and Replacing Air Cleaner Element To Change Engine OIL from the BottomCleaning Engine Cooling Fins Cleaning and Gapping Spark PlugStop engine. Let it cool Cleaning Drive Belt and Transmission Area Checking and Replacing Drive BeltTo Replace Drive Belt Picture Note View is from underside of differentialTransmission Cable Adjustment-SP6213 Lubricate Drive Shaft Hub Bushings Lubricate Mower AxlesCheck Blade Check BladeSharpening Blade To Remove BladeBalance and Install Blade Filling Fuel TankCleaning Fuel Cap Vent Using Troubleshooting Chart TroubleshootingCheck Troubleshooting Preparing Machine for Storage Storing SafetyStoring Machine Preparing Fuel and Engine For StorageRemove Mower from Storage Lawnmower Assembly Side Discharge Chute Bagger Bagger Chute AssemblyInstall Starter Rope Identify Parts SP6211 and SP6213Install Grass Bag Add Engine OilInsert bagging chute tab E into rear mower shield slot F Test Mower Engine SpecificationsMachine Specifications Travel Speed RangeDimensions Recommended LubricantsWarranty Limited Warranty for NEW Scotts Brand ProductsTire Warranty Limited Engine WarrantyWarranted Parts Cleaning Belt and Transmission Area IndexStep Contact your dealer Quality StatementStep Refer to your operator’s manual Step Call the Customer Communications CenterService Record Record Service Dates