Scotts SP6213, SP6211 manual Test Mower

Page 36

ASSEMBLY

Test Mower

MX1568

1.Verify that spark plug wire (A) is attached to spark plug.

2.Put enough fuel in fuel tank to test mower operation.

3.Press primer bulb (B) three times to prime engine.

M93034

4.Hold blade control lever (C) against handle.

5.Start engine and check mower operation. (See Operating section.)

Assembly - 32

Image 36

Contents OPERATOR’S Manual Using Your Operator’s Manual IntroductionThank You for Purchasing a Scotts Product California Proposition 65 WarningProduct Identification Record Identification NumbersTable of Contents Safety Safety-Alert SymbolMachine Safety Labels Certification Label Operate SafelyPractice Safe Maintenance Protect ChildrenHelp Prevent Serious or Fatal Accidents Before you unplug or adjust machine Avoid Injury from Contacting BladeHandling Waste Products Handling Fuel SafelyOperating Engine Controls Handle and Cutting Height ControlsHandle Controls Stop EngineAdjusting Handle Height Key Cutting Height Adjustments In mm InchesUpper Handle Lower HandleStarting Engine RUNNING, Blade is TurningKeep hands, feet and clothing away from the blade Forward Travel Travel SpeedsStopping Engine Using Side Discharge Chute Using Grass BagMowing Tips To Avoid Scalping Bagging and CompostingBagging Tips Mulching TipsAfter Mowing Replacement Parts Service LiteratureJohn Deere Quality Part NumberService Intervals Service Engine Warranty Maintenance Statement Engine OilAdjusting Carburetor Avoid FumesChanging Engine Oil To Change Engine OIL from the TOPCleaning and Replacing Air Cleaner Element To Change Engine OIL from the BottomCleaning and Gapping Spark Plug Cleaning Engine Cooling FinsStop engine. Let it cool Cleaning Drive Belt and Transmission Area Checking and Replacing Drive BeltTo Replace Drive Belt Picture Note View is from underside of differentialTransmission Cable Adjustment-SP6213 Lubricate Drive Shaft Hub Bushings Lubricate Mower AxlesCheck Blade Sharpening BladeCheck Blade To Remove BladeBalance and Install Blade Filling Fuel TankCleaning Fuel Cap Vent Troubleshooting Using Troubleshooting ChartCheck Troubleshooting Storing Safety Storing MachinePreparing Machine for Storage Preparing Fuel and Engine For StorageRemove Mower from Storage Assembly Install Starter RopeLawnmower Assembly Side Discharge Chute Bagger Bagger Chute Identify Parts SP6211 and SP6213Install Grass Bag Add Engine OilInsert bagging chute tab E into rear mower shield slot F Test Mower Specifications Machine SpecificationsEngine Travel Speed RangeDimensions Recommended LubricantsWarranty Limited Warranty for NEW Scotts Brand ProductsTire Warranty Limited Engine WarrantyWarranted Parts Cleaning Belt and Transmission Area IndexQuality Statement Step Refer to your operator’s manualStep Contact your dealer Step Call the Customer Communications CenterService Record Record Service Dates