How to read temperature and other displays

How to read temperature and other displays

INDOOR/OUTDOOR TEMPERATURE & HUMIDITY

1.The current Temperature display is located at the lower left of the LCD screen. The Humidity display is on the lower right.

2.Press “C/F“ button inside the battery compartment of the receiver to select °F or °C temperature scale.

3.Press CHANNEL button to toggle between indoor, Ch1, Ch2, or Ch3 or auto scroll displays (depending on how many remote sensors are in use).The auto scroll option will display the indoor readings and remote sensor readings for 10 seconds each.

WEATHER FORECAST / BAROMETRIC PRESSURE

The Weather Forecaster function will estimate weather conditions of the next 12 hours: Sunny, Partly Cloudy, Cloudy, Rainy, or and Stormy. Predictions are based on altitude and changes in barometric pressure. Barometric pressure refers to the pressure exerted by the atmosphere at the time. It may be expressed in either millibars (mb), inches of mercury (inHg), or hectopascals (hPa). To toggle between “mb”, “inHg”, and “hPa” barometric pressure displays, press the “PRESSURE” button.

These on-screen animated icons illustrate predicted weather conditions:

SUNNY

PARTLY

CLOUDY

RAINY

STORMY

Note: Altitude factors into weather forecasting and barometric pressure readings. Enter the correct current Altitude to obtain the most accurate weather forecast / barometric pressure readings. (If the current altitude is unknown, one reference for altitude maps in the US is http://www.ngdc.noaa.gov/mgg/topo/state.html.)