Taylor 1528 instruction manual Toprogram altitude

Press and hold History to start

altitude setting.

Pressure units.

Press +C/F or -PMCE/RCC to

select pressure units. Press History to select

Altitude digits flash.

Press +C/F or -PMCE/RCC to scroll through altitudes units.

Press History to select.

Altitude digits.

Altitude is set.

For the most accurate barometric pressure readings, you should program your current Altitude into your WeatherGuide™. If the current altitude is unknown, one reference for altitude maps in the US is:

http://www.ngdc.noaa.gov/mgg/topo/state.html.

Toprogram altitude:

1.Press and hold the“HISTORY” button. The unit will beep.The “mb/hPa” and “inHg” icons flash.

2.Press “+C/F” or “-PMCR/RCC” to choose either“mb/hPa or“inHg” pres-

sure displays. Press “HISTORY” to se- lect15. The altitude digits flash.

3.Press the “+C/F” or “-PMCR/RCC” buttons to scroll through prepro- grammed altitude options. Press“HIS- TORY” to select.

4.The display will shortly return to the

Barometric Pressure display. (Note: Both 'mb' and 'hPa' altitudes will be expressed in meters, while 'inHg' is expressed in feet.)