Taylor 1528 instruction manual Repeat to set minutes, Toset two alarms

Page 9

Press and hold SET/AL

Hour digits flash

Press +C/F or -PMCE/RCC to

change hours.

Press SET/AL to enter hours.

Minutes digits flash.

Repeat to set minutes.

Alarm 1 is active

Alarm 2 is active

2. Press and hold the “SET/AL” button.The unit will beep and the alarm’s hour digits will flash.

3. Press “+C/F” or “-PMCE/RCC” to change the hours. Press “SET/AL” to enter. The minutes will flash.

4. Press9 “+C/F” or “-PMCE/RCC” to change the minutes. Press “SET/AL” to enter.The unit will return to the clock dis- play.

5. A icon above the time indicates Alarm 1 is active.The unit will return to the clock display after approximately 15 sec- onds, or press “MODE” until the clock dis- play returns.

Toset two alarms:

Press the“MODE” button untilA2 appears. Repeat programming steps for A1.

A icon above the time indicates Alarm 2 is active.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents WeatherGuideInstruction Sys em withManualRemote Sensor Plan your work day,play day,every day. Now that’s smart TroubleShootingAtomic Clock SnoozeHow to Set up Your WeatherGuide System Base UnitRemote S nsor If the transmission is successful,the remote Remote sensor location Base unit locationPlease note If Repeat to set rest Clock/calendar settings Tomanually set the clockClock/calendar is now set Toset one alarm Your WeatherGuide has 2 separate alarm settingsToset two alarms Icon above the time indicates Alarm 2 is activeRepeat to set minutes Snooze feature Toturn off the alarmMoon Phase Auto Scroll feature the base unit can Temperature/Humidity ReadingsToView Minimum/Maximum temperature/humidity readings Barometric Pressure Readings Barometric14 Pressure HistoryReadings for the past 12 hours. Toprogram altitude An hour Temperature Trend IndicatorsSnowy Snowstorm Moon phase Icons Low Battery Indicator SwitchDisconnected Signals Ansmissi Collision ProblemSolvingPage
Top Page Image Contents