Taylor 1528 instruction manual Your WeatherGuide has 2 separate alarm settings, Toset one alarm

Page 8

Press MODE to start alarm

setting

A1

HowPress toSET/ALSetaftertheAlarmchoosing 12/24 hour tim .

Clock is set

Press M , then press nd hold SET/AL, hen press Mode

to change DST.

Tip: Hold down the “+C/F” or “-PMCE/RCC” buttons to advance the dig- its quickly.

Daylight Savings Time – to turn DST on, press “MODE” until “OFF” appears in the clock digits. Press and hold the “SET/AL” button until it switches to “ON”. DST is8now on. Press “MODE” to return to the clock display.

Your WeatherGuide™ has 2 separate alarm settings.

Toset one alarm:

1. Press the “MODE” button on the back of the base unit.The unit will beep.The clock time changes to the alarm time. “A1” ap- pears next to the time.

Image 8

Contents WeatherGuideInstruction Sys em withManualRemote Sensor TroubleShooting Plan your work day,play day,every day. Now that’s smartAtomic Clock SnoozeRemote S nsor How to Set up Your WeatherGuide SystemBase Unit If the transmission is successful,the remote Base unit location Remote sensor locationPlease note If Clock/calendar is now set Repeat to set rest Clock/calendar settingsTomanually set the clock Your WeatherGuide has 2 separate alarm settings Toset one alarmRepeat to set minutes Toset two alarmsIcon above the time indicates Alarm 2 is active Toturn off the alarm Snooze featureMoon Phase Temperature/Humidity Readings Auto Scroll feature the base unit canToView Minimum/Maximum temperature/humidity readings Readings for the past 12 hours. Barometric Pressure ReadingsBarometric14 Pressure History Toprogram altitude Temperature Trend Indicators An hourSnowy Snowstorm Moon phase Icons Switch Low Battery IndicatorDisconnected Signals ProblemSolving Ansmissi CollisionPage