Storage | Tanaka TLE-550 instruction

TLE-550	Owner’s Manual
	Owner’s Manual

c. Governor hunting (Varying rpm)

-Hunting occurs with insufficient warm up of engine.

-When the governor spring, governor rod or governor rod spring moves improperly, hunting may occur. Check and clean.

-If governor rod spring becomes stretched, hunting may occur. Handle with care or replace.

-If the gasoline and oil mix ratio is not correct, hunting may occur. Ratio should be from 25:1 to 50:1.

-When fuel tank or petcock is clogged with dirt or old fuel, hunting may occur. Check and clean.

-When there is insufficient oil in the governor, the weights will not operate properly, resulting in hunting. Check and refill with gear oil.

-If the high speed screw on the carburetor is improperly adjusted, hunting may occur. Adjust properly.

7.GEAR CASE, WIRES AND MUFFLER a. The gear case is lubricated with

multi-purpose grease. The level should be checked after every 50 hrs. of use by removing check screw. (Fig. 24)

b. Adjust wire and throttle wire should be lubricated at both ends with a penetrating type oil after every 20 hours of use.

c. Remove the muffler and clean out any excess carbon from the exhaust port or muffler inlet every 100 hours of operation. (Fig. 25)

8.STORAGE

a.Completely drain all fuel from tank, start engine and let it run at idle speed until fuel has been cleared from fuel lines and carburetor.

b.Remove spark plug and put a slight amount of 2 cycle oil into the cylinder. Gently pull recoil starter to evenly distribute oil, then re-install spark plug.

b. Store unit in a cool and dry place.

www.tanakapowerequipment.com	10	custsvc@tanaka-
ism.com

TLE-550 specifications

The Tanaka TLE-550 is a sophisticated and robust solution engineered for precision and efficiency in various applications. Renowned for its exceptional performance, this model stands out in the realm of industrial equipment, catering to the needs of professionals across diverse sectors.

A cornerstone of the TLE-550's design is its powerful motor, which delivers impressive torque and speed. This feature enables rapid operations, making it a suitable choice for tasks that require high productivity and minimal downtime. The ergonomic design of the device enhances usability, allowing operators to maneuver it with ease during demanding assignments.

One of the main features of the Tanaka TLE-550 is its advanced control system. Equipped with intuitive digital interfaces, users can effortlessly adjust settings to meet specific requirements. The system offers real-time feedback and monitoring, ensuring optimal performance and safeguarding against potential issues. This technology contributes to improved safety and longevity of the equipment.

Moreover, the TLE-550 incorporates cutting-edge materials that enhance durability and resistance to wear and tear. The body is engineered to withstand harsh environmental conditions, making it suitable for outdoor and industrial use. Additionally, components are designed for easy maintenance, allowing operators to conduct routine checks and repairs without extensive downtime.

Another noteworthy characteristic of the TLE-550 is its versatility. It is compatible with an array of attachments and accessories, enabling users to customize the equipment for various applications. This adaptability makes it a valuable asset for industries ranging from construction to manufacturing, where a multi-functional tool can significantly increase operational efficiency.

The Tanaka TLE-550 also prioritizes energy efficiency. The design focuses on minimizing power consumption while maintaining peak performance, contributing to cost savings over time. This eco-friendly approach is increasingly important in today's market, where sustainability is a growing concern.

In summary, the Tanaka TLE-550 masterfully combines power, functionality, and durability, making it an excellent choice for professionals seeking reliable equipment. Its advanced technology, user-friendly controls, and versatile applications ensure that it stands out in an increasingly competitive market. Whether in a factory, on a construction site, or in any high-demand environment, the TLE-550 is built to deliver superior results.