Blade Installation, Starting | Tanaka TLE-550 specs

TLE-550	Owner’s Manual
	Owner’s Manual

5.BLADE INSTALLATION

a.Take off the fixing nut, cutter holder cap and holder washer from the blade shaft.

b.Install the blade on the shaft and then replace the holder washer, cutter holder cap, spring washer and fixing nut in order.

c.Insert the locking bar into the hole of the cutter holder and gear case by lining up each hole. (Fig. 14)

d.Tighten the fixing nut securely.

6.INSTALLATION OF GUARD ADJUSTING BOLT

a. Install guard adjusting bolt with washer 8 and bent washer. (Fig. 15)

IV. OPERATING PROCEDURES

1. FUEL

For proper lubrication, this engine must operate on a mixture of gasoline and TANAKA brand 2-cycle engine oil. TANAKA 2-cycle oil has been formulated to insure maximum engine performance and, increased engine life. The gasoline must be mixed according to the instructions on the oil bottle. If TANAKA oil isn't available, mix 50 parts of regular gasoline to 1 part of quality 2 cycle mix.

CAUTION: Do not use gasoline containing alcohol or gasohol as this may remit in engine failures.

2. STARTING

WARNING: Keep hands and feet away from cutting blade while starting engine and during operation.

a. When starting engine, move stop switch to "START" position. If engine is cold, move choke lever to "CHOKE" position. (Fig. 16 & 17)

b.With the safety lever (13) pressed (if so equipped), pull throttle trigger and push lock button(3), then slowly release the throttle trigger first, then the safety lever. This will lock the throttle in starting position. (Fig. 16B)

c. Pull the recoil starter upwards briskly several times or until engine attempts to start. Pull down choke lever to "RUN" position and continue to pull until engine starts. (Fig. 18)

d. Let engine idle for about 3 minutes for warm-up.

WARNING: Be sure not to touch muffler during or right after operation since it is hot and you might be burned.

www.tanakapowerequipment.com

custsvc@tanaka-ism.com

TLE-550 specifications

The Tanaka TLE-550 is a sophisticated and robust solution engineered for precision and efficiency in various applications. Renowned for its exceptional performance, this model stands out in the realm of industrial equipment, catering to the needs of professionals across diverse sectors.

A cornerstone of the TLE-550's design is its powerful motor, which delivers impressive torque and speed. This feature enables rapid operations, making it a suitable choice for tasks that require high productivity and minimal downtime. The ergonomic design of the device enhances usability, allowing operators to maneuver it with ease during demanding assignments.

One of the main features of the Tanaka TLE-550 is its advanced control system. Equipped with intuitive digital interfaces, users can effortlessly adjust settings to meet specific requirements. The system offers real-time feedback and monitoring, ensuring optimal performance and safeguarding against potential issues. This technology contributes to improved safety and longevity of the equipment.

Moreover, the TLE-550 incorporates cutting-edge materials that enhance durability and resistance to wear and tear. The body is engineered to withstand harsh environmental conditions, making it suitable for outdoor and industrial use. Additionally, components are designed for easy maintenance, allowing operators to conduct routine checks and repairs without extensive downtime.

Another noteworthy characteristic of the TLE-550 is its versatility. It is compatible with an array of attachments and accessories, enabling users to customize the equipment for various applications. This adaptability makes it a valuable asset for industries ranging from construction to manufacturing, where a multi-functional tool can significantly increase operational efficiency.

The Tanaka TLE-550 also prioritizes energy efficiency. The design focuses on minimizing power consumption while maintaining peak performance, contributing to cost savings over time. This eco-friendly approach is increasingly important in today's market, where sustainability is a growing concern.

In summary, the Tanaka TLE-550 masterfully combines power, functionality, and durability, making it an excellent choice for professionals seeking reliable equipment. Its advanced technology, user-friendly controls, and versatile applications ensure that it stands out in an increasingly competitive market. Whether in a factory, on a construction site, or in any high-demand environment, the TLE-550 is built to deliver superior results.