Tanaka ECV-4501 manual Air filter Fig, Cleaning the air filter, Spark plug Fig

Page 14

ECV-4501

Owner’s Manual

 

 

 

Air filter (Fig. 3-2)

The air filter (1) must be cleaned from dust and dirt in order to avoid:

•Carburetor malfunctions.

•Starting problems.

•Engine power reduction.

•Unnecessary wear on the engine parts.

•Abnormal fuel consumption.

Clean the air filter daily or more often if working in exceptionally dusty areas.

Cleaning the air filter

Remove the air filter cover and the filter (1). Rinse it in warm soap suds. Check that the filter is dry before reassembly. An air filter that has been used for some time cannot be cleaned completely. Therefore, it must regularly be replaced with a new one. A damaged filter must always be replaced.

Spark plug (Fig. 3-3)

The spark plug condition is influenced by:

•An incorrect carburetor setting.

•Wrong fuel mixture (too much oil in the gasoline)

•A dirty air filter.

•Hard running conditions (such as cold weather).

These factors cause deposits on the spark plug electrodes, which may result in malfunction and starting difficulties. If the engine is low on power, difficult to start or runs poorly at idling speed, always check the spark plug first. If the spark plug is dirty, clean it and check the electrode gap. Readjust if necessary. The correct gap is 0.6mm (.024”). The spark plug should be replaced after about 100 operation hours or earlier if the electrodes are badly eroded.

NOTE!

In some areas, local law requires using a resistor spark plug to suppress ignition signals. If this machine was originally equipped with resistor spark plug, use same type of spark plug for replacement.

www.tanakapowerequipment.com

13

custsvc@tanaka-ism.com

Page 13 Page 15
Image 14
Page 13 Page 15
Contents ECV-4501 Before using this unit ECV-4501 Operator Safety Assembly procedures Proper Tension is Extremely IMPORTANT! -4Fueling Operating procedures Fuel FigFuel Chain OIL -1 B Adjustment of Chain OIL SupplyStarting cold engine -2,2B, 3,4,4B Starting Warm EngineChain Catcher Chain brake operation Optional FigStopping Fig ECV-4501 Felling Basic Rules for Felling TreesLimbing Thick LOG, Larger than Guide Bars Length Thick LOG, Larger than Guide BAR LengthCross Cutting LOGS, Pressure on Bottom If the SAW Gets StuckIdle speed adjustment T MaintenanceCarburetor adjustment Fig Spark plug Fig Cleaning the air filterAir filter Fig Side case Fig Oiler port FigGuide bar Fig Fuel filter FigDecompression valve Fig Icing protection system -12,12BChain Sharpening Weekly maintenance Maintenance scheduleDaily maintenance Monthly maintenanceSpecifications V001001 Bar & Chain USA and Bar & Chain Canada Model Number BAR Number LENGTH-TYPE Chain Number

ECV-4501 specifications

The Tanaka ECV-4501 is a sophisticated piece of equipment designed to meet the demands of modern industrial applications, particularly in construction and heavy machinery sectors. Known for its reliability and versatile functionality, the ECV-4501 stands out due to its innovative features and cutting-edge technologies.

One of the main features of the Tanaka ECV-4501 is its powerful engine. Equipped with a high-performance 4-stroke engine, it delivers outstanding torque and efficiency, allowing for rapid completion of tasks without compromising on power. This robust engine is complemented by an advanced cooling system that ensures consistent performance even in the most demanding environments.

The ECV-4501 is built with user-friendly controls that improve operator efficiency. The ergonomic design includes a well-structured dashboard that displays essential information at a glance, allowing operators to monitor the machine’s status easily. The intuitive control panel enhances usability, making it suitable for both experienced operators and newcomers.

In terms of safety features, the Tanaka ECV-4501 incorporates multiple systems designed to protect the operator and the machinery. Safety guards are strategically placed to minimize risks during operation, while automatic shut-off systems are in place to prevent overheating and mechanical failures. These features contribute to a work environment that prioritizes safety and reliability.

The Tanaka ECV-4501 also excels in its technological integration. It is equipped with advanced sensors and diagnostics tools that allow for real-time monitoring of the machine’s performance. This connectivity not only assists in predictive maintenance but also helps in identifying potential issues before they lead to downtime.

Another notable characteristic of the ECV-4501 is its compact design. Unlike many machines in its class, the ECV-4501 can easily maneuver in tight spaces, making it ideal for urban construction sites and other confined environments. Its lightweight chassis does not sacrifice durability, as it is constructed with high-grade materials that withstand the rigors of daily use.

In summary, the Tanaka ECV-4501 is a remarkable blend of power, efficiency, and innovation. Featuring a robust engine, user-friendly controls, comprehensive safety systems, and advanced technology integration, it is designed to meet the high standards of modern industrial demands. Whether for large-scale projects or smaller tasks, the ECV-4501 is a reliable choice for professionals seeking a versatile and effective machine.
Top Page Image Contents